How to show TITLE of column?
not sure on the numbers terminology but can anyone help me find where i turn on the ability to see the TITLE of the columns when i am not looking at an area that includes these?
right now if i scroll way down i can see the ALPHABET but i need to see the name that i have given to the column in ROW A or i cannot tell where to paste information.
does that make sense?
TIA
hi jerrold, wayne. thank you!
i am having a bit of a time with this one.
i hit the "header row" icon (the one with the grey bar on top) and this created a ROW 1. I copied what is now Row 2 which is where i had my COLUMN TITLES and /pasted/ this into Row 1.
now i am looking for a "freeze header row" option because i cannot see this ROW 1 when i scroll down (I can only see the A, B, C, D etc) when i scroll down.
when i click on the header row button there is no option to freeze and this is the same for when i go to the Table pulldown. in the table pulldown both "repeat header rows" and "repeat header columns" are checked.
am i supposed to somwhow /replace/ the ABCD etc with my COLUMN TITLES to get this to work...?
THANKS
Similar Messages
-
How to show Primary_key in Column Tab - Oracle SQL Developer 2.1.1.64
How to show Primary_key in Column Tab or It bug? i can not see. thank you for answer.
This was removed for performance reasons, but a lot of us asked for it to go back in.
Don't know if it is currently planned, so better request this at the SQL Developer Exchange, so other users can vote and add weight for possible sooner implementation.
Regards,
K. -
How to show BLOB type Column ? In XE
How to show BLOB type Column as image in APEX report area? (In XE)
I did it with the following procedure
create or replace PROCEDURE MY_IMAGE_DISPLAY (p_image_id IN NUMBER)
AS
l_mime VARCHAR2 (255);
l_length NUMBER;
l_file_name VARCHAR2 (2000);
lob_loc BLOB;
BEGIN
SELECT 'JPEG', MLOGO, 'IMAGE', DBMS_LOB.getlength (MLOGO)
INTO l_mime, lob_loc, l_file_name, l_length
FROM CARS_TABLE
WHERE M_ID = p_image_id;
OWA_UTIL.mime_header (NVL (l_mime, 'application/octet'), FALSE);
HTP.p ('Content-length: ' || l_length);
OWA_UTIL.http_header_close;
WPG_DOCLOAD.download_file (lob_loc);
END my_image_display;
GRANT EXECUTE ON my_image_display TO PUBLIC;
and executed the following command
CREATE PUBLIC SYNONYM my_image_display FOR shema_name.my_image_display;
but under XE , I can not see synonym? why?sakrami,
Your question really belongs in the XE forum:
Oracle Database Express Edition (XE)
I think this posting addresses your question:
Re: Handling of pictures changed? Item values not properly updated in Beta
Joel -
How to show all fileds column without scroll the report output.
Hi,
In my report output shows few columns and need to scroll right to see rest of fields . but i want to see all columns without scroll to right side in output.
Please guide me how to fix the fileds in report.
Regards.Hello,
Why dont you use WAD and then switch off these properties in Webitem paging properties.
i think that would give you more flexibility with paging,scrolling but with some extra effort of creating a WAD
waiting for your feedback
Regards
Nitin Bhat -
How to show title of link that is drag and dropped into messages (like it was in iChat)
I recently updated from Lion to Mavericks and with that came the change from iChat to Messages. My problem that I have is that back when I had iChat I could just drag and drop links (example from Reddit) into the chat window and then the link would be shown with the link title from the website instead of just the address.
Is there a setting I can change to get this back? Right now I am having to hand type all the titles/descriptions and then provide the web address.Hi,
I was thinking through how I have sent Links for web sites in ichat in the past and if I had changed now.
I have always Copied and Pasted the URL and had not tried Dragging the URL to iChat/Messages.
I have just tried from my Snow Leopard computer to my Mavericks one and I see the full URL at the snow Leopard end and the Mavericks end (using Bonjour)
However If i Drag a link from on a Page then that title to the link is what I see.
It also works from Mavericks to the Snow Leopard computer.
The Mavericks end pic
8:53 pm Sunday; November 17, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
How to show Titles in browser?
I have seen at one PC Titles area but one PC is not shown.
Is this preferences issue?hello toplisek, when you go into the customization mode through the firefox ''menu ≡ > customize'' there will be a setting to display/hide the title bar area...
[[Customize Firefox controls, buttons and toolbars]] -
How to show New calculated item in graph.
I created a new calculated item in column in pivot table. That new calculated item is not showing in line graph.
How to show that new column in graph.
ThanksGuys Please provide any pointers to achieve this. its very urgent for me.
Regards
Kris -
How to show or Hide Generic Column in a regular report
Hi All,
I have created report based on "SQL query (pl/sql function body returning sql query). It returns columns based on some conditions. I have total 60 generic columns like (COL1,COL2....COL60) but it returns 18 or 20 columns based on my conditions, how can I hide the columns that I don't needed. My column heading is based on function return by ':' separated. My function returns number of columns also. Is there any we I can show only those columns which contains data. My report is exactly similar to the default "SQL query (pl/sql function body returning sql query). I didn't find any logic how they are doing this show and hide. I appreciate any ones help.
Thanks,Hi there,
Somehow you need to find out how many columns your dynamic select will return (by what you said it seems that your procedure returns this information). Then store that number in a hidden page item, say Pnn_COUNT.
Then, for the 19th and 20th columns in the report add these conditions:
Column 19: :Pnn_COUNT >= 19
Column 20: :Pnn_COUNT >= 20
I hope this helps.
Luis -
How to show next set of columns in a adf table
hi,
i want to display 999 no of columns in a adf table. since it is not a better way to show all the columns in the adf table at a time, we want to show 10 columns at first and by using the next and previous links the user can see the next and previous set of columns. i dont know how to do this. please help me.
parameswaranYou have to put table name in Capital letters
Like
SELECT COUNT(1)
FROM user_tab_columns
WHERE table_name = 'EMP';
or
SELECT COUNT(1)
FROM user_tab_columns
WHERE table_name = UPPER('Emp');Regards
Arun -
How to show a word document stored in a BLOB column?
Hi guys.
I'm trying to show the content of a MS Word document through forms 6i. This document was stored as byte-for-byte by an application developed in .Net to an BLOB column (oracle table). Anybody could help me in how to show this document using Internal Persistend LOBs and through forms 6i?
I've been searching for it a lot of time without success...
Thank you in advance.
Alex.I've read about using the ole2 item, but I don't how to do it with BLOB files. I tried to use it and didn't work... I don't know if I've used it correctly or not. Could anybody give a sample, please?
If anybody knows other way to do it, please send too.
Thanh you,
Alex. -
How do you use a column title Ina formula in numbers
How do you use a column title in a formula in numbers ie. "cost" vs. F-1?
Have you tried here? This isn't specifically a "Using iPad" question.
-
How to show value and unit in different columns
Hi All,
I need ABAP help for the below requirement in BI7.0
Data source contains the field Amount in local currency (Data source is flat file of CSV format)
Amount in local currency
1000 INR
2000 INR
1000 GBP
2000 EUR
I have to get this value in target like below( value and unit should be in different columns)
Amount in local currency 0currency
1000 INR
2000 INR
1000 GBP
2000 EUR
Can any one help me how to declare the data type for Amount in local currency and how to show this value in two columns in the target.
Thanks,
kishore.TYPES:BEGIN OF ty_stru,
s1 TYPE string,
END OF ty_stru,
BEGIN OF ty_stru1,
s2 TYPE string,
s3 TYPE string,
END OF ty_stru1.
DATA:itab TYPE TABLE OF ty_stru,
wa LIKE LINE OF itab.
DATA:itab1 TYPE TABLE OF ty_stru1,
wa1 LIKE LINE OF itab1.
START-OF-SELECTION.
"--Input--
In input 1000 and USD having space
wa-s1 = '1000 USD'.
APPEND wa TO itab.
wa-s1 = '1000 INR'.
APPEND wa TO itab.
wa-s1 = '1000 EUR'.
APPEND wa TO itab.
"--Input--
LOOP AT itab INTO wa.
SPLIT wa-s1 AT space INTO wa1-s2 wa1-s3.*------> split command
APPEND wa1 TO itab1.*---------------->splited value store into another internal table
ENDLOOP.
"--Display--
LOOP AT itab1 inTO wa1.
WRITE: wa1-s2,
wa1-s3.
ENDLOOP.
"--Display--
Output:
1000 USD
1000 INR
1000 EUR
This is simple prgram for split a string into two different string based on space
regards
Dharma
Edited by: dharma raj on Aug 19, 2009 2:01 PM -
In Pivot table how to show folder heading of a Measures column
Hi gurus
I am using 11.1.1.6.6 version
Any idea how to show column heading of a measure column in Pivot table view.
for Dimension its working fine
I have 3 dimension column and 12 measure column in my reportHi Santosh Sutar,
Did you mean that you want to hide/show the rows in an worksheet? If I understood correctly, there is no such API in apps for Office at present. Most of functions are used interop with data.
If you want apps for Office to support this function, I suggest that you submit the feedback from link below:
Customer Feedback for the Office Developer Platform
And you get learn more about apps for developing from link below:
Build apps for Office
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to show attributes column types on ERD
Hi,
I created a diagram in ERD but can't find how to show in the diagram the column types. It only shows the column names but doesn't show if this is a varchar2, integer,etc or if this can be null or not. Please help.
Thanks in advance.the idea is that entities are logical objects. Although you can designate a "format" for an attribute, it's really more of a physical model/implentation concept.
So the answer to your question is No.
However, If you wanted to use a Server model Diagram there is a lot more information associated with it.
And since it is a actual model of the DB then you will have your foreign keys in the child tables.
Michael -
How the show version of the Acorbat in the title bar?
How the show version of the Acorbat in the title bar?
I’m not sure if there is an option that shows the version of the Acobat (8.0, 8.1, 9, …) on the title bar! Wondering why it is not shown by default. We need to know where we are!
AutoCAD has this feature!
Thank you for the help,
Best
JamalYou can try the Feature Requests forum, but to be honest I don't see what's
the big deal. As you showed in your screenshots, a single click on the Help
menu reveals the version, and if you click on the "About" item, you'll get
all the full version info. And since you can't have more than one version
of Acrobat on the computer, there's no real chance of accidentally using
the wrong version.
Maybe you are looking for
-
Loading with sqlloader utility
i'm running sql loader utility to append rows into an oracle table; my control card has the following fields: jobid position(01:05) char, jobnm position(06:25) char, create_date position(26:35) date "yyyy-mm-dd" the problem is that create_date may or
-
33522A Function / Arbitrary Waveform Generator, 30 MHz
Hi! I have got 33522A Function / Arbitrary Waveform Generator, 30 MHz. I want to produce two squarewave signal of 30 KHz, one on each channel. Trick is the wave form should be mirror image. I problem is, wondering if those signal is sysncronise i
-
To load text area by clicking on a button
Hello Experts, In my application, i want to add a text area to add comment. I will provide one button to add comment. When I click on it, it should load a text area with submit button. After typing some text in text area and click submit, it needs to
-
When I forward any kind of photo or picture to someone, they cannot view the image. If they reply to me, I can see the image. Why can I not forward images? The only way I've been able to do this is to save the images from the received email and then
-
It seems that my iPhone 4S is unable to contact the FaceTime server. I am using a WIFI connection. I cannot connect to others using FaceTime. What do I have to do?