How to solve power error when using USB camera adapter in your camera

Hello Everyone,
First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
Things you need:
Camera
USB camera adapter (Ginues Apple product)
Power bank (I'm using 8,400 mAh)
Dual USB Male to 5 Pin Mini USB Y Cable
Ipad
Procedure:
Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
'---------- Power Bank
Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
Then attach the USB2 to the power bank/portable charger to power it up.
your welcome

yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
No can do, Skippy!

Similar Messages

How to solve these Errors when generating .dll (using JNI) ?

Hello,
I am very new about JNI. As I have been trying to generate my dll (sysHook.dll) as I followed this topic http://forums.sun.com/thread.jspa?threadID=632369 (by Jbgohlke ) by putting this command:
cl -I"C:\Program Files\Java\jdk1.6.07\include" -I"C:\Program Files\Java\jdk1.6.07\include\win32" sysHook.cpp -FesysHook.dll Then many errors are popped up as follows:
sysHook.obj :error LNK2019: unresolved external symbol __imp__CallNextHookEx@16 referenced in function "long__stdcall HookKeyboardProc(int,unsigned int,long)" (?HookKeyboardProc@@YGHIJ@Z)
sysHook.obj :error LNK2019: unresolved external symbol __imp__SetWindowsHookExA@16 referenced in function " void__cdecl Init(void)" (?Init@@YAXXZ)
sysHook.obj :error LNK2019: unresolved external symbol __imp__UnHookWindowsHookEx@4 referenced in function "void__Cleanup(void)" (?Cleanup@@YAXXZ)
sysHook.dll : fatal error LNK1120: 3 unresolved externals
If anyone of you know this PLEASE!! point me out!!
[email protected]
Thanks in advance

Specify the appropriate library when linking.
This is not a JNI question. It is a Windows/C/C++ programming question.
Locking this thread.

I get "Reading Error" when using USB connection from Ipod Touch to car radio. Any ideas?

I am trying to connect an IPOD Touch with my car radio via USB port. Using proper cable which works. When I connect the auto radio automatically tries to hook up with the Ipod but then displays "reading error"

The the car-system manyfacturer say it will work with your model iPod and its iOS?
Not all do.

[solved]make error when using svn in PKGBUILD

Hi, all
I want to install the development package of R software using PKGBUILD. My PKGBUILD file is like this:
pkgname=r
_svnmod=r
pkgver=0.0.0
pkgrel=1
pkgdesc="R is a language and environment for statistical computing and graphics"
arch=('i686' 'x86_64')
license=('GPL')
url=('http://www.r-project.org/')
depends=('blas' 'lapack' 'bzip2' 'libpng' 'libjpeg' 'libtiff'
'ncurses' 'pcre' 'readline' 'zlib' 'perl' 'gcc-libs'
'tk' 'libxt' 'libxmu' 'pango')
#makedepends=('subversion' 'openjdk6' 'gcc-fortran')
makedepends=('subversion' 'jre7-openjdk')
options=('!makeflags')
conflicts=('r')
provides=('r')
source=('r::svn+https://svn.r-project.org/R/trunk/')
md5sums=('SKIP')
pkgver() {
cd "$SRCDEST/$_svnmod"
svnversion
build() {
cd "$srcdir/$_svnmod"
./configure --prefix=/usr \
--libdir=/usr/lib \
--datarootdir=/usr/share \
rsharedir=/usr/share/R/ \
rincludedir=/usr/include/R/ \
rdocdir=/usr/share/R/docs/ \
--enable-memory-profiling \
--with-readline \
--with-x \
--with-system-zlib \
--with-system-bzlib \
--with-system-pcre \
--enable-R-shlib \
--with-lapack \
--with-blas \
--without-recommended-packages \
F77=gfortran \
LIBnn=lib
make
package() {
cd "$srcdir/$_svnmod"
make -j1 DESTDIR=${pkgdir} install
# Fixup R wrapper scripts.
sed -i "s|${pkgdir} ||" ${pkgdir}/usr/bin/R
rm ${pkgdir}/usr/lib/R/bin/R
cd ${pkgdir}/usr/lib/R/bin
ln -s ../../../bin/R
But i encounter a make error like this:
ERROR: not an svn checkout
make: *** [svnonly] ERROR 1
Did anyone give me some advices? Thanks a lot!
PS. I was noticed that in wiki page "VCS PKGBUILD Guidelines", "The copy in $srcdir is made using svn export which does not create working copies. Any svn related command has to be used in the local repo in $SRCDEST." So when I change the cd line in build() and package() function into
cd "$SRCDEST/$_svnmod"
the error message vanished. But the local repo are changed when configure and make the project.
Last edited by januslian (2013-05-06 08:50:09)

Scimmia wrote:This will be fixed in pacman 4.1.1. For now, just copy the ".svn" dir yourself. cp -r "$SRCDEST/$_svnmod/.svn" "$srcdir/$_svnmod"
Great, it works. Thanks.

How to handle the error when using Connection.setAutoCommit()

I use Jboss's datapool to realize the connection to Sybase
Database.And after connected to the database I wrote "con.setAutoCommit(false)" then the error occured.
The error is "java.sql.SQLException: JZ0SJ: Metadata accessor information was not found on this database. Please install the required tables as mention ed in the jConnect documentation."
I think it is because there is something wrong with the
configuration of the database but can not handle it .So please
help me,thank you!

I use Jboss's datapool to realize the connection to
o Sybase
Database.And after connected to the database I wrote
"con.setAutoCommit(false)" then the error occured.
The error is "java.sql.SQLException: JZ0SJ: Metadata
a accessor information was not found on this database.
Please install the required tables as mention ed in
the jConnect documentation."
I think it is because there is something wrong with
th the
configuration of the database but can not handle it
.So please
help me,thank you!Most likely it means that your either DB or JDBC driver doesn't
support transactional approach, I mean: commit(), rollback() functions, so it reports setAutoCommit(false) as errorneous situation.
Paul

Error when using receiver JDBC adapter

i am using JDBC adapter as receiver(for oracle 10g) now, however i got ORA-00984 error. So i enable logSQLStatement.
then got the following SQL statement from communication channel monitoring:
INSERT INTO BASEINFO(APPNO, BUSSINAME, APPPERSON) VALUES (3, Steven, Lee)
I realize the statement is incorrect, which should be:
INSERT INTO BASEINFO(APPNO, BUSSINAME, APPPERSON) VALUES ('3', 'Steven', 'Lee')
So how can i correct the SQL statement? is there any setting i miss out in configuration?
Thanks

You may try this. For each field in datatype, add an attribute hasQuot. Map it to "no" in mapping. Then add single quotes to all the values by simply concatinating it on both sides of value.
Regards,
Prateek

When using nant i was told "excepted point(.) and coma(;)".how to solve this error

hi
i am using nant and for my code
            var symmetricKey = new RijndaelManaged() { Mode = CipherMode.CBC, Padding = PaddingMode.Zeros };
it is ok when i compile it by visual studio,but when i use nant i was told"excepted point(.) and coma(;)".
how to solve this error?
any help would be appreciated
best regards
martin

anyway now i realized that since i used .Net Frame work 2.0, and i should use like this
RijndaelManaged symmetricKey = newRijndaelManaged();
            symmetricKey.Mode = CipherMode.CBC;
            symmetricKey.Padding = PaddingMode.Zeros; and i cannot use "var" i've solved this problem and it could be helpful if some one who have the same problem

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

I hate "J term"
OK I love the learning the students get. And, I like helping them out! But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
Instructors invited to engage in the forums
Jeff

How to solve this error using OSX Server's bots

Plz help me.
My remote repository is SVN version controll system.
when I started integration using bot in OSX Server. this error was pisplayed on a log.
how to solve this error to integrate my project using OSX Server.
Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:466 77537310 +61ms] Will NOT send email notifications because notifyCommitterOnFailure is NO Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:470 77537310 +0ms] Posting email notification for bot run with type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:471 77537310 +0ms] Sending email to committers = (null) Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:1033 77537310 +0ms] Posting notification of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:199 77537310 +0ms] Posting notification for bot run GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +45ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.postNotificationForBotGUID:andRunGUID:andNotificati onType:additionalEmails:(c6189ca0-0649-0649-c01e-81c4d0b52dd9,f87f0098-f8ca-4bfa -945e-cbb11a2f6abb,com.apple.notifications.BotFailed,( ))} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:601 77537310 +84ms] Deleting work queue item: cf7fe6b8-4df8-b723-4794-50fbf27955ed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCWorkQueueService.deleteWorkQueueItemWithGUID:(cf7fe6b8-4df8-b7 23-4794-50fbf27955ed)} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:929 77537310 +13ms] Marking build bundle complete with status failed and sub-status internal-checkout-error Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:97 77537310 +55ms] Updating bot run with GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:102 77537310 +0ms] Updating bot run (f87f0098-f8ca-4bfa-945e-cbb11a2f6abb): { guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({ guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; })} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:108 77537310 +121ms] Updating bot with GUID c6189ca0-0649-0649-c01e-81c4d0b52dd9 Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:117 77537310 +0ms] Updating bot with latest bot run GUID key Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:124 77537310 +0ms] Updating bot (c6189ca0-0649-0649-c01e-81c4d0b52dd9): { guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBot:({ guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; })}

Hello,
You need to make sure both names match exactly

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Device uses too much power error when trying to upload pictures

I am now getting the device uses too much power error when trying to upload pictures from my Nikon Coolpix. It had worked fine using the Apple camera kit, but just started giving this error. What changed?

1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad

TS3694 how to solve 1015 error message

how to solve 1015 error messege

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Pull up itunes on a computer and plug the iPad cord into the USB but the the device, hold the "Sleep/Wake" button and the "Home" button at the same time and count to 8. then let go the Sleep/Wake button BUT KEEP YOUR FINGER ON THE HOME BUTTON. while holding the home button connect the device to the cable thats plugged into the computer and keep holding the home button
AT NO TIME SHOULD YOU LET GO OF THAT HOME BUTTON until you see the message pop up in itunes saying "iTunes has discovered your iPad in recovery mode" then just go through the screens to restore the device.
if that message doesn't pop up after about 20 seconds, then call apple care, let them know you tried to perform the DFU mode restore (Deivce Firmware Update) and it was a no go. and ask them if you're in warranty to replace it for free.

FSG Error when using segment override

Hi,
I have the following error when using segment override :
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RGRARG module: Financial Statement Generator
+---------------------------------------------------------------------------+
Current system time is 26-APR-2012 11:17:22
+---------------------------------------------------------------------------+
Starting Program RGRARG.
Arguments are:
    0   RGRARG                    - RGRARG
    1   username/password         - username/password
    2   0                         - 0
    3   Y                         - Y
    4   Data Access Set ID        - 1030
    5   Chart of Accounts Id      - 101
    6   ADHOC Prefix              - FSG-ADHOC-
    7   Industry                  - C
    8   Flex Code Id              - GLLE
    9   Default Ledger ID         -
   10   Report ID                 - 1011
   11   Row Set ID                - 3461
   12   Column Set ID             - 1018
   13   Period of Interest        - SEP-11
   14   Unit of Measure ID        - IDR
   15   Rounding Option           - C
   16   Override Values           - ----DIV3---000000
   17   Content Set ID            -
   18   Row Order ID              -
   19   Report Display Set ID     -
   20   Output Option             - R
   21   Exceptions Flag           - N
   22   Miniumum Display Level    -
   23   Effective Date            -
   24   Parameter Set ID          - 1011
   25   Maximum Page Length       - 58
   26   Sub-Request Run ID        - -998
   27   Application Shortname     - SQLGL
Message level is: Normal
rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
Query for period set name from GL_ACCESS_SETS
SELECT period_set_name
FROM GL_ACCESS_SETS
WHERE access_set_id = 1030
rgrini.build_per_arr:
period set name from GL_ACCESS_SETS:
ACCOUNTING
rgrini.build_per_arr:
Query for period names from GL_PERIODS
SELECT period_name,
    to_number(to_char(end_date,'YYYYMMDD'))
FROM GL_PERIODS
WHERE period_set_name = :p_value
ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
control->report_id = 1011
control->row_set_id = 3461
control->column_set_id = 1018
control->row_order_id = 0
control->content_set_id = 0
control->display_set_id = 0
control->parameter_set_id = 1011
control->resp_lvl = 0
control->round_option = C
control->output_option = R
control->excp = FALSE
control->sub_req_run_id = -998
control->appl_id = 101
control->id_flex_code = GLLE
control->ldg_val_set_id = 1010673
control->ledger_id = 0
control->ledger_name =
control->ledger_currency =
control->access_set_id = 1030
control->security_segnum = 0
control->per_cnt = 162
control->runtime_currency = IDR
control->resp_id = 50386
control->resp_appl_id = 101
control->enforce_security = TRUE
control->sec_rules = NULL
control->reduced_ranges = NULL
control->num_reduced_ranges = 0
control->max_char_width = 1
control->total_num_cols = 0
control->page = NULL
<< rgrini() 26-APR-2012 11:17:22
rgranl() 26-APR-2012 11:17:22Current date and time: Thu Apr 26 11:17:22 2012
rgrgsa() 26-APR-2012 11:17:22
<< rgrgsa() 26-APR-2012 11:17:22
rgrdrs() 26-APR-2012 11:17:22req_id_str =
809694
rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
<< rgrgas() 26-APR-2012 11:17:22
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
<< rgrgas() 26-APR-2012 11:17:23
rgrgrp() 26-APR-2012 11:17:23
<< rgrgrp() 26-APR-2012 11:17:23
COA Structure :
Segment: LEDGER_SEGMENT : Ledger
Segment: SEGMENT1 : COMPANY
Segment: SEGMENT2 : ACCOUNT
Segment: SEGMENT3 : PRODUCT
Segment: SEGMENT4 : DIVISION
Segment: SEGMENT5 : DEPOT
Segment: SEGMENT6 : COST CENTER
Segment: SEGMENT7 : FUTURE
Segment value security is enforced for Financial Statement Generator reporting.
rgrrsr() 26-APR-2012 11:17:23
rgrrsf() 26-APR-2012 11:17:23
<< rgrrsf() 26-APR-2012 11:17:23
<< rgrcrl() 26-APR-2012 11:17:23
<< rgrrsr() 26-APR-2012 11:17:23
rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COMPANY values will be processed.
The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All ACCOUNT values will be processed.
The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All PRODUCT values will be processed.
The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DIVISION values will be processed.
The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DEPOT values will be processed.
The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COST CENTER values will be processed.
The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All FUTURE values will be processed.
<< rgrpsr() 26-APR-2012 11:17:23
rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
<x get_def_ldgs() 26-APR-2012 11:17:24
<x get_def_ldgs() 26-APR-2012 11:17:24
rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
Starting axis query.
rgumsg:
fdnwsc() is used by default
rgrgax.get_conts - Prepare:
ORA-00936: missing expression
Current date and time: Thu Apr 26 11:17:24 2012
Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??
please advise
thx

I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein

How to catch BCD_OVERFLOW error when passing value to formal parameter?

Hi,
catching runtime error BCD_OVERFLOW exception is simple. However, it's not possible to catch this error directly, if it results from assigning too big value to the formal parameter.
Let's assume simple code with local class lcl_calculator implementing functional method add with two input parameters i_op1 and i_op2 both of type i and result value r_result of type i as well.
The following code dumps, without the exception being caught:
DATA:
   lo_calculator TYPE REF TO lcl_calculator,
   l_result TYPE i.
START-OF-SELECTION.
   TRY.
       CREATE OBJECT lo_calculator.
       l_result = lo_calculator->add(
         i_op1 = 10000000000
         i_op2 = 1 ).
       WRITE:/ l_result.
     CATCH cx_sy_conversion_overflow.
       WRITE:/ 'Error'.
   ENDTRY.
To solve this, the workaround has to be implemented with checking the values being passed to the method before the actual call is made:
DATA:
   lo_calculator TYPE REF TO lcl_calculator,
   l_result TYPE i,
   l_op1 TYPE i,
   l_op2 TYPE i.
START-OF-SELECTION.
   TRY.
       l_op1 = 10000000000.
       l_op2 = 1.
       CREATE OBJECT lo_calculator.
       l_result = lo_calculator->add(
         i_op1 = l_op1
         i_op2 = l_op2 ).
       WRITE:/ l_result.
     CATCH cx_sy_conversion_overflow.
       WRITE:/ 'Error'.
   ENDTRY.
It's the same with the function module call, so it's general unit interface issue. Also, using the exception handling related to the CALL METHOD command does not help here as it's not wrong parameter TYPING which causes the error. It's the VALUE of correctly typed parameter that causes the error.
The CATCH apparently reacts different ways when the assignment is made to the variable and to the formal parameter of the unit. Any idea how to solve the above without using that workaround?
Thank you
Michal

What about using numeric?
CLASS lcl_calculator DEFINITION.
   PUBLIC SECTION.
     METHODS add IMPORTING i_op1 TYPE numeric i_op2 TYPE numeric RETURNING value(r_sum) TYPE i
                  RAISING cx_sy_conversion_overflow.
ENDCLASS.                    "lcl_calculator DEFINITION
CLASS lcl_calculator IMPLEMENTATION.
   METHOD add.
     TRY.
         r_sum = i_op1 + i_op2.
       CATCH cx_sy_arithmetic_overflow.
         RAISE EXCEPTION TYPE cx_sy_conversion_overflow.
     ENDTRY.
   ENDMETHOD.                    "add
ENDCLASS.                    "lcl_calculator IMPLEMENTATION
DATA:
    lo_calculator TYPE REF TO lcl_calculator,
    l_result TYPE i.
START-OF-SELECTION.
   TRY.
       CREATE OBJECT lo_calculator.
       l_result = lo_calculator->add(
         i_op1 = 10000000000
         i_op2 = 1 ).
       WRITE:/ l_result.
     CATCH cx_sy_conversion_overflow.
       WRITE:/ 'Error'.
   ENDTRY.

How to solve the Error in Action for illustrator cs3

Through action in illustrator cs3 i changed the document mode RGB to CMYK via Visual Basic. But sometimes it throws 2 different kinds of error messages.
CODE:
appRef.DoScript "Change", "Convert"
While (appRef.ActionIsRunning)
WScript.sleep 1000
Wend
Error 1:
Could not complete the Play Command because the action is playing.
Error 2:
The Object "Document Color Mode: CMYK Color" is not currently available.
Could you please explain how to solve this error.

The input data provided as the first argument to ore.tableApply and rqTableEval are physically being moved from Oracle Database to the database server R engine, and then serially operating on the entire table The benefit to using ore.tableApply/rqTableEval in this case is the potentially greater amount of RAM on the database server. But it's important to note that R’s memory limitations still apply in this case.
You may have already seen the blog post on Managing Memory Limits and Configuring Exadata for Embedded R Execution where we discuss setting memory limits for the database server R engine. These suggestions can be used to load reasonably sized data tables, and you may still encounter limitations when using a very large table.
In contrast to the "table apply" functions, the "group Eval" and "row eval (" functions are parallel-enabled embedded R execution functions. They support data-parallel execution, where one or more R engines perform the same R function, or task, on different partitions of data. The following training and blog links should be helpful in choosing the correct function for your use case:
http://www.oracle.com/technetwork/database/database-technologies/r/r-enterprise/learnmore/ore-1-4-embedded-r-execution-s…
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle1
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle2
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle3
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle4
http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle5
Sherry

How to solve power error when using USB camera adapter in your camera

Similar Messages

Maybe you are looking for