How to specify for a internal table field so that number of digits = 9
In if condition how can i specify that
if country = 'US'
then the account number should be equal to 9 digits only.
<removed_by_moderator>
Edited by: Julius Bussche on Aug 6, 2008 1:41 PM
You can set the internal table field to the biggest length possible, according to your requirements, and then work on something like the following. If the condition is met and you have to shorten the account number... try something similar to this:
DATA e TYPE string VALUE 'Test string'.
* I'm using 2 as an example here.
SHIFT e BY 2 PLACES RIGHT CIRCULAR.
SHIFT e BY 2 PLACES LEFT.
WRITE :/, e.
Avraham
Similar Messages
-
Totals for the internal table field in alv
Hi Gurus,
I have an issue in displaying the totals in alv.
I have an internal table with the three fields like below.
scrap_code_001 like afru-xmnga, " Scrap Reason Qty.
scrap_code_002 like afru-xmnga, " Scrap Reason Qty.
scrap_code_003 like afru-xmnga, " Scrap Reason Qty.
In the output table which i am passing to the fieldcatlog is having the three above fields with values 10,3,4 respectively.
I am looping at the internal table
loop at gt_grund.
gv_tabix = sy-tabix.
i_fieldcat-no_zero = gc_x.
i_fieldcat-do_sum = gc_x.
perform assign_alv_qty_format.
if gt_grund-grund is initial.
gt_grund = 'NONE'.
gv_text = gt_grund.
else.
gv_text = gt_grund-grdtx.
endif.
gv_tabixn = gv_tabix.
gv_scrap_code+11(03) = gv_tabixn.
gv_fieldname = gv_scrap_code.
translate gv_fieldname to upper case.
perform bild_fieldcat using
gv_fieldname 'GT_REPORT' 'AFRU' gv_text 'QUAN' '12' ' ' .
endif.
endloop.
But in the output I am getting the totals but it displays totals for all the three columns as 17,17,17 (summing 10,3,4).
How do I display total as 10,3,4 for each column separately.
I appreciate you help and award points for the answerHi,
Please check if value fields i_fieldcat-ref_fieldname and i_fieldcat-ref_tabname regard to numc or curr type.
EX: i_fieldcat-ref_fieldname = 'WRBTR'
I_fieldcat-ref_tabname = 'BSEG'.
Regards,
Fernando -
How to populate dynamic internal table fields with data??
Hi Folks,
How to assign a particular internal table field to a dynamically assigned internal table?
I have an excel sheet, and i upload the excel sheet data into an internal IT_EXLOAD table using FM ALSM_EXCEL_TO_INTERNAL_TABLE
Now i created a dynamic internal table which has the same column as in my DB table.
I have to fill the dynamically created Internal table with the IT_EXLOAD data dynamically.
Suppose in future if i add some field in DB table and for that field if i add some column in excel sheet there is no need to change in the program.
Looking for reply...
Best Regards,
Sayakhi,
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_path
i_begin_col = '1'
i_begin_row = '2'
i_end_col = '2'
i_end_row = '1000'
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
*declare intern_tmp as internal table tb_data in wich you want the data
*and declare a field symbol <fs_123>
LOOP AT intern.
ASSIGN COMPONENT intern-col OF STRUCTURE
intern_tmp TO <fs_123>.
IF NOT <fs_123> IS ASSIGNED.
CLEAR intern.
CLEAR intern_tmp.
CONTINUE.
ENDIF.
<fs_123> = intern-value.
AT END OF row.
CLEAR tb_data.
MOVE-CORRESPONDING: intern_tmp TO tb_data.
APPEND tb_data.
CLEAR intern_tmp.
ENDAT.
CLEAR intern.
ENDLOOP.
**paste this code and you can see the data in ur tables dynamically.
Thanks
Nitin Sachdeva -
Accessing Dynamic Internal table fields
Hello All,
I have one internal table ep_tabx having 138 columns whose data is getting displayed
by using function module reuse_alv_grid_display.
Now my query is, i have created one custom button on the appl toolbar to download ep_tabx data.
IF the user changes the the layout of the output at runtime and then presses that custom button
then i have created one dynamic internal table using call method cl_alv_table_create=>create_dynamic_table suppose <dyn_table> whose struc will be that of
dynamic fieldcatalog returned by using FM REUSE_ALV_GRID_LAYOUT_INFO_GET.
And then I have put a loop on the int table ep_tabx and move corresponding to the int table
<dyn_table>. But when i download the <dyn_table> data through GUI_DOWNLOAD the
date fields data is not getting downloaded correctly. I have 4 date fields in my ep_tabx.
In the alv grid output the date is getting displayed like 08/30/2004(ie mon/date/yr) but in download
file it comes like 20040830(ie yr/mon/date and that too without /).How to access the dynamic
internal tables fields separately so asto convert them in the pgm before the download.
Kindly Help.
Thanks in advance.
MansiHi,
Search in SDN you would get loads of info on accessing dynamic itab's .
in order to convert your date format use WRITE stmt to convert the value in your itab before passing it to download FM.
Regards,
Raghavendra -
How to get the NameTab Structure(X031L) for Dynamic internal table?
when we pass standard table to the FM 'DD_GET_NAMETAB' we will get the
nametab structure(x031l), like this i want to get the same structure for
dynamic internal table . how can I achieve this
please help me...Hi,
try this method
REPORT zmaschl_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' EXPORTING i_structure_name = 'SYST' CHANGING ct_fieldcat = it_fcat[]. LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial. MOVE-CORRESPONDING is_fcat TO is_fieldcat. is_fieldcat-fieldname = is_fcat-fieldname. is_fieldcat-ref_field = is_fcat-fieldname. is_fieldcat-ref_table = is_fcat-ref_tabname. APPEND is_fieldcat TO it_fieldcat. ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table EXPORTING it_fieldcatalog = it_fieldcat IMPORTING ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.CREATE DATA new_line LIKE LINE OF <l_table>.ASSIGN new_line->* TO <l_line>.
Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP. -
Populating Empty Fields for Existing Internal Table Using For All Entries
I have an internal table called itab_extract that populates without any issues in SELECT A and SELECT B below. Trying to avoid looping, I am using select DB table 'for all entries' in itab_extract. I want the empty fields in itab_extract to populate from the values in the database. However, about 200,000 entries are being appended to the table, and, the values that existed for the already populated fields in itab_extract are gone, and the new fields are populated.
I've played with the syntax and cannot seem to get it to work. My next option is a time consuming loop.
How should the for all entries syntax look to accomplish filling the empty fields in the itab? Thank-You
*read ekko
select ebeln lifnr aedat bsart from ekko *SELECT A*
into CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in r_aedat.
select ebeln lifnr aedat BSART from ekko *SELECT B*
appending CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in S_DATE2 AND
BSART IN S_BSART.
select ebelp werks matnr *SELECT C*
into CORRESPONDING FIELDS OF TABLE itab_extract
from ekpo
FOR ALL ENTRIES IN itab_extract
where ebeln = itab_extract-ebeln.Hi Tom,
This SQL statement will be time consuming, Do not use a loop.
There are two options.
1. Select EKKO and EKPO details based on standard SAP view. (You can type EKKO in se11 view to find the correct view).
also use one range table populate r_aedat and s_date2 in the same. So you where condition will have r_newrange and
s_bsart. Also do not use into corresponding fields, it is not a good idea. It will increase your performance. Maintain the proper
sequence (Based on database structure of EKKO and EKPO)
2. If you are keen to use for all entries, then first select ekko then after your sy-subrc check get the data from EKPO.
Should be like this.
select ebeln bsart aedat lifnr from ekko into table gt_ekko where aedat in r_newrange and bsart in s_bsart.
if sy-subrc eq 0.
sort gt_ekko by ebeln ascending.
select ebeln ebelp werks matnr into table gt_ekpo for all entries in gt_ekko where ebeln eq gt_ekko-ebeln.
endif.
Hope it helps,
Best Regards,
Tapodipta Khan. -
How to check two internal table fields
Hi all,
I need to check two internal table fields are equal or not means which statement i can use.
Not internal table ,table contents i need to check i.e
it1-pernr = it2-pernr.
like this
if i put loop it'll check one table field for one loop.
if i put two loop means some fields reflecting 2 in it1 then it'll pring 4 times like that.i want to print whatever in internal table only .
pernr(0001) two times there in it1 means
it1-pernr = it2-pernr then
it's printing
0001
0001
0001
0001
like this but actually in it1 only two records.
Anybody know solution.tell me.
Thanks
Regards,
NandhaHi,
code for your view
data : begin of it1 occurs 0,
z_pernr like pa9012-pernr,
z_fac_c like pa9012-zz_fac_c,
end of it1.
data : it2 like Zsc1 occurs 0 with header line,
It1 data
pernr FAC C
0001 5555
0001 5555
0002 4444
0003 3333
0006 8888
It2 data
pernr FAC C
0001 5555
0001 5555
0005 6666
0003 3333
output(My code)
loop at it2 .
loop at it1 where pernr = it2-pernr.
write:/01 it1-1pernr,
10 it1-z_fac_c.
endloop.
endloop.
out put i need.
0001 5555
0001 5555
0002 4444
0003 3333
Thanks,
Nandha -
How would you order an internal table e.g. itab according a specific field
Hello
How would you order an internal table e.g. itab according a specific field?
Would you be so kind and let me see an mini example
Thank you in advanceHi Tina,
You can sort the table as already mentioned, or if you want it always kept in a key sequence you could define it as a sorted table something like this:
types:
begin of itabline,
field1 type c,
field2 type n,
field3 ....
end of itabline.
DATA itab TYPE sorted table of itabline WITH UNIQUE key field1.
You can then insert and read entries by the key fields.
Hope that helps as an option!
Robin -
Regarding Internal Table Field Validation [Modification]
Hi All,
I have a small issue with formatting of a field.
The Field is POTX1 - it would get the value as 'New MT-EPPE0097-COMP02',
Means i have one internal table field as i_error-POTX1 in that some times we get value as 'New MT-EPPE0097-COMP02'.
Whenever i get 'New' literal in that internal table field i have to remove that literal from that internal table field. And Left Justify the remaining part of the field.
Ex: 'New MT-EPPE0097-COMP02'
should become 'MT-EPPE0097-COMP02'.
For this first i have to find wether 'New' Literal exists in the Internal table field or not then i have to remove it.
Can anybody tell me how can i solve this issue.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.Hi,
Take a look :
loop at i_error.
if i_error-potx1(3) = 'New'
w_potx1 = i_error-potx1.
i_error-potx1 = w_potx1+3(37).
MODIFY i_error.
endif.
ENDLOOP.
Regards,
Erwan.
Message was edited by: Erwan LE BRUN -
Assigning value to Field - Symbol ( which is type of internal table field )
Hi All,
I am facing problem to assign the value to a field symbol. My requirement is creating a dynamic internal table and populate values into that internal table, so that i can display the values .
I am having a structure with fields like status , Plant1 name , Plant2 name.....Plant n .
So i declared an internal table it_tab with this structure.
I am having one more table which having number of records for Plant1 ,Plant 2 ,....Plant n based on some condition.
I need to count the number of records for Plant1 and i need to put in the internal table it_tab.
For this i created field-symbol .
Here, t_deployment table will have the plants 1,2,3...and
t_devobject will have some records for these plants.
LOOP AT T_DEPLOYMENT.
clear w_count.
LOOP AT T_DEVOBJECT WHERE ZDEPLOYMENT = T_DEPLOYMENT-DOMVALUE_L AND
ZADSTATUS = '10'.
w_count = w_count + 1.
ENDLOOP.
concatenate 'it_tab-' t_deployment-domvalue_l into var_bet_name.
assign var_bet_name to <bet_var_name>.
now my internal table field i.e. it_tab-plant1 came into <bet_var_name> . But i want to assign a value for it.
at last what i need is it_tab-plant1 = w_count.
whaterver the w_count has value that needs to assign to it_tab-plant1. But i don't want to assign directly it it_tab-plant1. I want to assign dynamically. Because tommorrow some more plants added to t_deployments , i don't want to make changes to my program. It should take care....w/o changing the program.
I tried the following statement.
(<bet_var_name>) = w_count. But its not working.
Please let me know how i can get this.
Thanks in Advance.
Pavan.Hi pavan,
As ur requirement is creating a dynamic internal table,
try the following way,
remember the fieldcat should be of type LVC not SLIS.
BUILD LT_LVCFIELDCAT in a way that, the value from the internal table becomes the fieldname
ex:-
loop at it_models INTO WA_MODELS.
LS_LVCFIELDCAT-FIELDNAME = WA_models-MODEL.
LS_LVCFIELDCAT-SELTEXT = WA_models-MODEL.
append ls_lvcfieldcat to lt_lvcfieldcat.
endloop.
DATA: DREF TYPE REF TO DATA,WA_REF TYPE REF TO DATA.
FIELD-SYMBOLS: <TEMP_TAB> TYPE TABLE, <TEMP_WA> TYPE ANY.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = LT_LVCFIELDCAT
IMPORTING
EP_TABLE = DREF.
ASSIGN dref->* TO <TEMP_TAB>.
now basing on the fieldcatalog <temp_tab> is build.
NOW FILL <TEMP_TAB>.
WHILE FILLING, ASSIGN COMPONENT IDX/NAME.....
this statement will be very usefull.
i hope this will be help full.
pls reward the points if it helps u.
regards
Hyma -
How to create an dynamic internal table with the structure of a ddic table
Hi all,
I want to fill ddic-tables (which I already created) in my abap dictionary with data out of CSV-files (which are located on the CRM-Server). The ddic tables have different amount of fields.
I started with creating a table which contains the name of the tables and the path to the matching CSV-file.
At the beginning I'm filling an internal table with part of this data (the name of the ddic-tables) - after that I am looping at this internal table.
LOOP AT lt_struc ASSIGNING <lfs_struc>.
LOOP AT lv_itab1 INTO lv_wa1 WHERE ztab_name = <lfs_struc>.
lv_feld = lv_wa1-zdat_name.
ENDLOOP.
CONCATENATE 'C:\-tmp\Exportierte Tabellen\' lv_feld INTO lv_pfad.
Do.
OPEN DATASET lv_pfad FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
READ DATASET lv_pfad INTO lv_rec.
IF sy-subrc NE 0.
EXIT.
ENDIF.
enddo.
REPLACE ALL OCCURRENCES OF '"' IN lv_rec WITH ''.
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
INSERT into (<lfs_struc>) values lr_str_value.
CLOSE DATASET lv_pfad.
endloop.
This is not the whole code, but it's working until
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
I want to split all the data of lv_rec into an internal table which has the structure of the current ddic-table, but I didn't find out how to do give the internal table the structure of the ddic-table. In the code I used an internal tyble type string but I should be the structure of the matching tabel.
If I try to create an internal table by using a fiel symbol, I am told, that the data types are not matching.
Has anyone an idea?Hi Mayari,
though you were successfull with
METHOD cl_alv_table_create=>create_dynamic_table
I must warn you not to use it. The reason is that the number of tables created is limited, the method uses GENERATE SUBROUTINE statement and this triggers an unwanted database commit.
If you know the DDIC structure, it is (starting with ECC6.0) much easier:
field-symbols:
<table> type standard table.
data:
lr_data type ref to data.
Create data lr_data type table of (<DDIC structure>).
assign lr_data->* to <table>.
The split code can be simplified gaining speed loosing complexity not loosing functionality.
field-symbols:<fs_s> type any.
field-symbols:<fs_t> type any.
SPLIT lv_rec AT ';' INTO table it_string.
loop at it_string assigning <fs_s>.
assign component sy-tabix of wa_string to <fs_t>.
if sy-subrc = 0.
<fs_t> = <fs_s>.
endif.
at last.
append <fs_itwa3> to <ft_itab3>.
endat.
endloop.
Though it may work as Keshav.T suggested, there is no need to do that way.
Regards,
Clemens -
*How can we use the internal table in module pool programming? Clarify plz*
If we creating a screen using the table having four fields(for e.g.). The screen has the functions of display, modify, delete, save, exit etc for the fields. The front-end of the screen having I/O fields of the table using internal table. How can we declare the internal table in the screen?
HI,
Create one WA for your Internal table and then map it to your fields.
For Example,
Data : begin of wa,
name(10),
age type i,
end of wa.
data : it like table of wa with header line.
Then in screen create input fields with the name, age and ***.
Then the user entered values are stored in name age and ***.
then you can manipulate with that values using wa.
Thanks. -
Need Help in Field Symbol for Dynamically passing table field value
Hi All,
In my internal table I am having data.
I am dynamically forming table field name and substitute for the another table field name to pass DATA.
but I am getting the Variable name insted of Value ie Data.
I am using Field Symbol for this.
data:
Field-symbols <TS> type any.
field1 type string.
LOOP AT TABLEFIELDS INTO WA_TABLEFIELDS.
READ TABLE TEST WITH KEY NAME = WA_TABLEFIELDS-FIELDNAME.
IF SY-SUBRC = 0.
CONCATENATE 'WA_' WA_TABLEFIELDS-TABNAME '-' WA_TABLEFIELDS-FIELDNAME INTO Field1.
Assign Field1 to <TS>.
ALL_VAL-VALUE = <TS>
"After substituting the <TS> into ALL_VAL-VALUE field I need a DATA to be passed but the variable name is appending"*
APPEND ALL_VAL.
ENDIF.
ENDLOOP.
kindly how to pass the value into the table.
Thanks in advance.
SanHi,
pls assign a break point in
CONCATENATE 'WA_' WA_TABLEFIELDS-TABNAME '-' WA_TABLEFIELDS-FIELDNAME INTO Field1.
Assign Field1 to <TS>.
ALL_VAL-VALUE = <TS>
" Put a break point here and check for the value in <TS>.
if <TS> contains value then create a work area for ALL_VAL AND PASS the Field-Symbol to that and then append thw wa into the table...
Hope this works out!!
thanks -
Creating the spool request for the internal table data
Hi..
I am little confused with the function module used for creating the spool request.
well...I am practicing the ALV report and sending the that report to the spool.
I ve used the FM SLVC_TABLE_PS_TO_SPOOL.
this is the way i defined the internal table.
Data:
begin of imat occurs 0,
matnr like marav-matnr,
maktx like marav-maktx,
matkl like marav-matkl,
ntgew like marav-ntgew,
gewei like marav-gewei,
end of imat.
data i_lines type sy-tfill
and i declared..
describe table imat lines i_lines.
then i given the value for i_file_length as i_lines in the export paramet of the FM SLVC_TABLE_PS_TO_SPOOL.
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = i_lines
IMPORTING
E_SPOOLID = spoolid
tables
it_textdata = imat
when i executed it shows the list and wen going back it shows the runtime error as
CALL_FUNCTION_CONFLICT_LENG - Type conflict when calling a function module (field length).
please provide me some solutions.
thanks in advance.
etienne.Hi satyajit,
Thanks for your response....but the fields in my internal table "IMAT" is not compatible with the structure LVC_S_1022 as it has it componenrt - LINE.
so how can i define my internal table IMAT as type lvc_s_1022 as you suggested.
thanks in advance.
etienne. -
Header to internal table fields
Hi All,
How can I add header description to the internal table fields and download this internal table to desktop as EXCEL form.
I want to show heading in the first line of the excel and then 2 - 3 blank lines and then next line should be populated with DATE and Exec. Time, then 2-3 blank lines , then the data with the header description to be displayed.
My sample internal table data is as below,
John M 12 2344
Thomas M 17 8960
Lin F 10 8467
Jan M 12 4323
I need to add, description as NAME above John, Thomas, Lin etc.
as GENDER above M,M,F etc.
as CODE above 12, 17,10 etc. and
as EXTENTION above 2344, 8960,8467 etc
final execl sheet should be as below,
COMPANY DATA
DATE 28 - 08 - 2009 TIME 12:32
NAME GENDER CODE EXTENTION
John M 12 2344
Thomas M 17 8960
Lin F 10 8467
Jan M 12 4323
Please let me know, how to do this.
Thanks in advance ,
SabuHi,
Kindly go through this sample code below:
"Create T_Head internal table with the required structure for the header
*func mod to download header and contents to the given path
call function 'GUI_DOWNLOAD'
exporting
write_field_separator = 'X'
filename = v_pathname "path entered by the user
tables
data_tab = t_head. "Header Internal table
refresh t_head.
clear t_head.
call function 'GUI_DOWNLOAD'
exporting
* BIN_FILESIZE =
filename = v_pathname
filetype = 'ASC'
append = 'X' "Here by giving 'X', header will be appended in the download int table
write_field_separator = 'X'
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = itab
* FIELDNAMES =
exceptions
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
others = 22
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endif.
Hope it helps
Regards
Mansi
Maybe you are looking for
-
Help, my iPod doesn't sync all my music
Ok, I transfered my music from my old pc to my new mac, via my ipod. One problem when I went to sync my music back onto my ipod not all the music would sync. This message keeps appearing, Some of the items in the itunes library were not copied to the
-
When i am talking on the phone, some of the functions on the screen get activated (loudspeaker, mute etc.) when i press the lock screen button, it ends the call. How do I lock the screen during a call?
-
Using Shift+Tab With in JTable (Swing)
My Jtable have 4 columns , one of the column that is third one is setEditable fale , now im using SHIFT+TAB to travel the cells in this situation i cant travell from 4th cell to 2nd one because the third one is non editable , is ther any work around
-
Novice Question - When to use WAR files
Sorry I'm so thick, I just don't seem to grasp the concept of how to structure my web pages in tomcat (or any j2ee server I suppose). Any help, as always, is greatly appreciated. Let's say I want to build a personal website that would have a default
-
Hi all, I am trying to create BDC session for more than one checks for transaction FCH6, but only one check number is getting processed/updated. Please suggest some solution. PFB my code : PERFORM bdc_open_group. REFRESH t_bdcdata[]. LOOP AT t_bdc_er