How to stop the vi dynamically called out?

Some vi was dynamically called out by the attached vi, may I know how to close it using the vi reference. Thanks
Solved!
Go to Solution.
Attachments:
PubSub_Start_VI_Dyn.vi ‏25 KB

hi turbot,
if that is running first abort that vi using invoke node and then use the property Node of that vi reference That is Front Panel Windowpen pass faulse value to close that vi. for more details check the attachment.
Regards,
Santhosh M
Attachments:
Close VI.vi ‏8 KB

Similar Messages

How to stop the remote service call

Hi
On loading a screen i place some service call, now i move to next screen , but still the service call is running, i have to stop or cancel the last placed service call.Is there any way to stop the service call with out disconnecting the channel.
thanks in advance
karthy

Here are the solutions I can think of (if no one here responds with something better):
1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
Good luck.

How to stop the tcplisten. vi called by a sub vi

In my application I'm calling a subVI (pop up) that use the
TCPListen.vi to listen to a specific port. This subVI executes the
communication function well and then exit to return to the main
application loop. But at this moment the client are reconnecting
automatically to the TCPListen server. The client should no
reconnect to the server (the client reconnect timeout cannot be
changed).
I checked with the "TCPview" program from www.sysinternal.com and
confirm that the TCPlisten server is still active on the system when I
end the subVI application... I can end this server task only when I end
the main labview application.
Is there any method to "kill" or "stop" the server
application subVI without leaving my main program ....
Thanks for advice
Regards
HaemoPhil
Attachments:
Get Local IP Address.vi ‏6 KB
testtcp.vi ‏9 KB
server.vi ‏16 KB

HaemoPhil wrote:
In my application I'm calling a subVI (pop up) that use the
TCPListen.vi to listen to a specific port. This subVI executes the
communication function well and then exit to return to the main
application loop. But at this moment the client are reconnecting
automatically to the TCPListen server. The client should no
reconnect to the server (the client reconnect timeout cannot be
changed).
I checked with the "TCPview" program from www.sysinternal.com and
confirm that the TCPlisten server is still active on the system when I
end the subVI application... I can end this server task only when I end
the main labview application.
Is there any method to "kill" or "stop" the server
application subVI without leaving my main program ....
You will want to close the Listen
network reference too. The TCP Listen.vi is a high level VI that does
everything conviniently in one VI but it does not close the server
socket at all. What I would do instead is using the TCP Create Listener
and TCP Wait on Listener nodes directly. AFTER you are done with the
server, close the "listener ID" that you got from TCP Create Listener
and have used in the TCP Wait on Listener node by wiring it to TCP Close.
Rolf Kalbermatter
Message Edited by rolfk on 04-26-2006 12:17 PM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

HT4009 How to stop the purchases being taken out every month?

I had two app that i was using, and i done a purchases for it to be taken out every month but I want to stop it but i dont know how to stop it.

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

How to stop the timing out of web Discoverer Plus

I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
Thank you,
Olga

Please check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.

How to stop the call summary display on home screen?

How to stop the call summary display on home screen?

Here are the solutions I can think of (if no one here responds with something better):
1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
Good luck.

How to stop the gray wheel from spinning after logging out

how to stop the gray wheel from spinning after logging out?

Frank ...
Make sure to quit all open applications before logging out.
Your proflie indicates your Mac has v10.7.1 installed.
If that is the case, updating your system software will help as far as functionaly as well as security.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac.
message edited by: cs

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to change the images dynamically in a table.

Hai,
How to change the images dynamically in a table based on the condition in webdynpro abap.
Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

This has been much discussed earlier. Do search posts.
For your scenario i would do the following.
inside your node which is binded to the table, i create a new node image with cardinality 1 ..1 and a attribute called path of type string.
create a supply function for the node image .
Supply method now has a Element (Parent element ) and node.
Based on your record in element, set the right image source to path attribute and bind the node.
This will make sure that the framework calls the image supply function for every row in a table.

How to stop the report from Web!

hi,all!
Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.

hello,
there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
regards,
the oracle reports team --pw

How to stop the Dialog from being dragged

I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
while a dialog is showing.
When it is visible I can still click and drag the Dialog
I want to set it so you can not drag it until the dialog has be closed.

If you don't have access to the parent frame, a "hack" that usually works:
Frame frame = Frame.getFrames()[0];
if (null != frame && frame instanceof JFrame){
JFrame jf = (JFrame)frame;
JDialog jd = new JDialog(jf, "title");
... code here ...
As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

How to stop the Browser from caching my web pages

Hi There
Can anyone tell how to stop the browser from caching my jsp pages
I am using
<%response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
but this does not work anduser is able to go back to the previous page
which i dont want and i want the browser to display the message the page has expired
Help appreciated
Thanks
Mumtaz

response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("max-age", 0);
response.setDateHeader("Expires", 0);
I have cut paste the code from my jsp which is working. There is one additional line. I do not know if that is the cause but there is no harm in trying that out.
Srinivasan Ranganathan

How to stop the tab bar from automatically hiding itself?

ive only found how to stop the address bar from disappearing and everyone with the tab problem seems to have posted this over a week ago and still hasnt been fixed yet if noone has a fix im out and done with firefox they can suck a fat one
why add this feature! i can understand the address bar but not the tabs all you have to do to hide it was push the tab button again and its gone was that so fucking hard that you had ruin a perfectly fine browser

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and facilitate future improvements to Firefox, the option to hide the tab bar was removed.
Fortunately, this can easily be resolved if you desire the keep tabs hidden. You can install "[https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/ Hide tab bar with one tab]", an extension hosted on Mozilla's add-ons site, which will restore the ability to hide the tab bar.
Thank you and I hope this helps!

How to stop the thread?

Hi,
How to stop the thread in java. This is my program.
import java.net.InetAddress;
public class ThreadPing extends Thread {
     ThreadPing(String pingIP)
          super(pingIP);
          start();
     public void run()
          try
          String pingIP = Thread.currentThread().getName();
          InetAddress inet = InetAddress.getByName(pingIP);
          Boolean get=inet.isReachable(1500);
          if(get==true)
               System.out.println(inet.getHostName());
          }catch(Exception e)
     public static void main(String args[])
          for(int i=1;i<=100;i++)
               String pingIP = "192.168.1."+i;
               ThreadPing tp = new ThreadPing(pingIP);
Thanks in advance.

The simplest way to stop all the thread is to make all thread daemons and exit the program when you want them to stop.

How to stop the vi dynamically called out?

Similar Messages

Maybe you are looking for