How to switch display of label for SelectOneRadio in horizontal layout
Using selectOneRadio with the horizontal layout and it displays the label and then the radio buttons to the right of the label.
LABEL RADIO1 RADIO2 RADIO 3
Is there a way to display the radio buttons to the LEFT of the label instead?
RADIO1 RADIO2 RADIO3 LABEL
Another question .... instead of radio buttons, we'd like to use check boxes instead, with the same functionality as the selectOneRadio ... just checkboxes instead of radio buttons.
Can't find anything like selectOneCheckbox though, just a SelectBooleanCheckbox or SelectManyCheckbox, which won't work.
Thanks for any help.
Hi,
you can use combination of selectOneRadio and outputLabel so in selectOneRadio leave label blank and put this text in outputLabel component, which you store to the right of selectOneRadio
<af:panelGroupLayout id="pgl1" layout="horizontal">
<af:selectOneRadio id="sor1" layout="horizontal">
<af:selectItem label="label1" value="1" id="si1"/>
<af:selectItem label="label2" value="2" id="si2"/>
</af:selectOneRadio>
<af:outputLabel value="outputLabel1" id="ol1"/>
</af:panelGroupLayout>regards,
Branislav
Similar Messages
-
How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language. -
Display a label for every other category on a graph
I have a line graph created in Illustrator with years on the horizontal axis (1998, 1999, 2000, 2001, 2002, etc.). There is data for each year that will be plotted on the line, however I would only like to display every other year (1998, 2000, 2002, 2004, 2006, etc.). Is there a way to show every other year on the horizontal axis.
I can't leave the years out because there is data for those years. In Excel, there is an option to 1 display a label for every category, 2 to display a label for every other category, 3 to display a label for every third category. How do you do it in Illustrator. My table looks something like this but begins in 1980.
"2001"
52
"2002"
56
"2003"
81
"2004"
84
"2005"
91
"2006"
97
"2007"
102
"2008"
103
"2009"
104
"2010"
110
"2011"
106 -
How can I display the range for LastFullMonth in the header of a report
How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?
Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part ) -
How do you display total time for playlist in Itunes 11
how do you display total time for playlist in Itunes 11
"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy? -
How do i create mailing labels for an avery template using pages
how do i create mailing labels for an avery template using pages.
mcc,
The first topic in the "More LIke This" box to the right of your question is a rather comprehensive address label printing discussion. Does it answer your question?
Jerry -
How to dynamically display data labels in area chart
Hello, everyone,
I have an stacked area chart with the data set as follows:
Values: sales
Category Group: date
Series Group: products
Now I have an requirement to display the data labels in the chart for the top 3 products with the highest sales within a certain time period (based on the date parameter). E.g. product1 in the product 1 area, product 2 in the product 2 area, etc.
Is this possible? If so how do I go about doing it?
Your help is much appreciated
Kind regardsHi QQFA,
According to your description, you have a stacked area chart. Values is sales, Category Group is date, and Series Group is product. Now you want to show only top 3 products which has the highest sales data labels for each date.
In SQL SERVER Reporting Service, we can achieve this goal by using expression in Series Label Properties setting. I have tested it on my local environment, you can follow these steps below:
Create a new DataSet(name is “top3”).
Select use a embedded dataset in my report and put
“ select * from(
select Product,Sales,[Date],
ROW_NUMBER() over (partition by [Date] order by Sales desc) as rn
from #temp)
where rn<4 ”
into Query.
Right Click on your chart, select “show Data Labels”.
Right Click on any label that just appeared, select Series Labels Properties .
Click the “fx” next to Label data textbox.
Type the expression below into Set expression for Label :
“=IIF(InStr(Join(
lookupset(Fields!Date.Value,Fields!Date.Value,Fields!Product.Value,
"top3"),","),Fields!Product.Value)>0,Fields!Sales.Value,"")”
(Ps: the “lookupset” function is only supported in SQL SERVER 2008 R2 or later)
Click “OK”.
Save and preview the chart ,as shown here:
Now your chart will show you the top 3 highest sales product data labels in corresponding area.
Reference:
LookupSet Function
Expression and Functions
If you have any question ,please feel free to ask.
Best Regards,
Simon -
How to set displayed column width for a search help
I have created an elementary search help for a custom field with a value table behind it.
The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
Can anyone tell me how to set default column widths for the help?Please open you Elementary search help and see the Column width behind the Fields of your ...there increase the width of the fields
"Activate it and refresh
reward points if it is usefull .....
Girish -
HT2486 how can i print address labels for my Xmas cards from my address book?
Hi- I spent last night entering all my names and addresses of friends and family into my address book on my Macbook Pro. But I just can't figure out the next steps.... what labels should I purchase to print and then how to export the batch onto those labels. What am I missing? Thanks for your feedback!!
Hi!
@edcampbell
Welcome the HP Support forums. I understand that you are having a problem getting your labels lined up.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have?
How is the printer connected (USB cable, ethernet, or wireless)?
What is operating system are you using (Windows 7, or Mac 10.8, etc)?
What is the size of the labels that you are printing and is it a page of labels?
Thank you.
Guide to finding your product number
http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=ca&lang=en
@jom42452
Thank you for joining the HP Support community. I understand that you are unable to line the labels for your Photosmart printer.
To better aid you, would you please supply some further information:
What model of Photosmart printer do you have?
How is the printer connected (USB cable, ethernet, or wireless)?
What is operating system are you using (Windows 7, or Mac 10.8, etc)?
What is the size of the labels that you are printing and is it a page of labels?
Thank you.
How Do I Find My Model Number?
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
How do i display different tooltip for different parts of an image
I have a .jpg image that i would like to display different tooltips for depending in where the mouse pointer is in the image.
Any help is appreciated.I edited the button template in the app.xaml so all my buttons have transparent properties for all the trigger properties and the setter properties since in this instance i have no other use for the button.
<Application x:Class="Application"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
StartupUri="MainWindow.xaml">
<Application.Resources>
<Style TargetType="{x:Type Button}">
<Setter Property="FocusVisualStyle">
<Setter.Value>
<Style>
<Setter Property="Control.Template">
<Setter.Value>
<ControlTemplate>
<Rectangle Margin="2" SnapsToDevicePixels="True" Stroke="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}" StrokeThickness="1" StrokeDashArray="1 2"/>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Setter.Value>
</Setter>
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="Transparent"/>
<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
<Setter Property="BorderThickness" Value="1"/>
<Setter Property="HorizontalContentAlignment" Value="Center"/>
<Setter Property="VerticalContentAlignment" Value="Center"/>
<Setter Property="Padding" Value="1"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type Button}">
<Border x:Name="border" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" SnapsToDevicePixels="True">
<ContentPresenter x:Name="contentPresenter" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" ContentStringFormat="{TemplateBinding ContentStringFormat}" Focusable="False" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="{TemplateBinding Padding}" RecognizesAccessKey="True" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
</Border>
<ControlTemplate.Triggers>
<Trigger Property="IsDefaulted" Value="True">
<Setter Property="BorderBrush" TargetName="border" Value="{DynamicResource {x:Static SystemColors.HighlightBrushKey}}"/>
</Trigger>
<Trigger Property="IsMouseOver" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsPressed" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="ToggleButton.IsChecked" Value="True">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
</Trigger>
<Trigger Property="IsEnabled" Value="False">
<Setter Property="Background" TargetName="border" Value="Transparent"/>
<Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
<Setter Property="TextElement.Foreground" TargetName="contentPresenter" Value="#FF838383"/>
</Trigger>
</ControlTemplate.Triggers>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
</Application> -
Can I display the label for an ad rotator?
I'm trying to use the ad rotator module as a testimonials rotator. It would be helpful to put the person's name in the label and have it display.
Essentially, I am trying to find an easy way for my client to manage testimonials without having to upgrade from WebMarketing to WebCommerce. Obviously, web apps would be ideal for this.I ended up figuring it out.
The key is to use a module that can present a list view. I did it with the blogs module. This is how I did it:
I created a blog called Testimonials
Each post represents a separate testimonial
The post title is the name of the person who wrote it.
The main text area is where I put the testimonial
I edited the postlist.html layout to match the structure I wanted
Used jquery to show one at a time and rotate between them
This is what I edited postlist.html to be:
<figure>
<blockquote>“ {tag_blogpostbody} ”</blockquote>
<figcaption>- {tag_blogposttitle_nolink}</figcaption>
</figure>
I know this isn't ground breaking, but nobody responded to my post, so I figured it was either because nobody cared or nobody knew. I can't do anything about the first, but this is my solution to the second.
-Adam -
How to change mouse-over label for a mx:CandleStickChart?
I have an <mx:CandleStickChart .../> graph and want to change the default
labels on the mouse-over window. For example by default, the mouse-over window displays:
line1: some label
line2: open: #1
line3: close: #2
line4: high: #3
line5: low: #4
I want to change the words "open", "close", "high", "low" to something else. I optionally want to not show the "close" line.
Do you have any suggestions on how to do this? If you do, please provide a short example.
Thanks for taking the time to help.Hi
First change the name from kPlusIconPNGIconRsrcID to kPlusIconPNGIconIRsrcID
so "I" will indicate that your icon is inactive
Create another resource id like:
#define kPlusIconPNGIconIRsrcID 15
#define kPlusIconPNGIconARsrcID 15
Define paths to the icons
resource PNGA(kPlusIconPNGIconIRsrcID) "../res/icons/PLUS_ICO_23_I.png" // Inactive icon
resource PNGR(kPlusIconPNGIconARsrcID) "../res/icons/PLUS_ICO_23_A.png" // Active icon
Regards
Bartek -
How can i display units only for the result set
hi
i do not want to display units (example: $ or %) for my key figure columns but i want to display units to the result.
how can i do thatHi Surya,
I don't think it is possible to have both non-unit and unit in the same kf.
One potential workaround to do this is to create a calculated key figure/ formula that use the NODIM function for single values. Example: NODIM(0AMOUNT). Then, create a calculated key figure/formula that computes overall result on the same kf and supresses individual values but does not use NODIM....perhaps this can help you work out a solution.
Hope this helps.
Regards,
Petter
Message was edited by: M Petter -
I have a custom budget using Numbers '08 and have labeled a chart in previous versions of my budget but when I tried to update it for the new year I can't figure out how to make the label change dynamically as I drag the selected area to the adjacent column. I have checked Numbers Help and Tutorial videos as wellas the manual and have not found anything that comes close to helping but as I said I had it on previous versions but obviously don't remember how I did it and unfortuanately it is not a very intuitive feature. Thanks in advance for any help on this.
The linkage appears to be automatic, but when broken, does not reattach itself.
Redoing the chart isn'r a long process, though, unless you've made extensive format changes to it. Here's my process, which started with a headerless table wiht the Month labels in Row 1 (and a Chart that had an "Untitled" label on the category axis, and ended with the table and chart shown below:
Click on any cell in the table to activate it.
Go Table > Add Header Row.
Select the cells containing the month names. Copy.
Select the cells in the same columns of the Header row. Paste.
Select the table. If the Header for the current month is highlighted and the month label is on the table, Stop here. If not (and it probably will not be), continue.
Delete the existing Chart (or drag it aside to use as a colour and style reference)
Unhide any hidden rows used in the Chart.
Select the cells to be charted.
Click the Series orientation control (¡¡¡) to change it. The control will turn 90° and move from the column highlight to the row highlight.
Your table and chart should now resemble the one in the image above. Edit the style as needed and you're done.
Regards,
Barry -
How to program display inputValue label bold?
I am using jdev v10g, I have five date inputValues as drag from a colllection and drop it as read-only form, My question is how to make the label bold if the date value is not null? Thanks!
In ADF 11g the tag <af:panelLabelAndMessage> has an attribute called <tt>labelStyle</tt> that can be used for the requested puprose. Unfortunately, <af:panelLabelAndMessage> in ADF 10g has no such attribute, so there is no simple way to do it in ADF 10g. Of course, you can use something like
<tt> <af:outputLabel inlineStyle="#{<yourValue>!=null ? 'font-weight:bold;' : ''}" .../>
<af:outputText .../></tt>
but you could not align easily the labels and values in the form layout after that.
Maybe you are looking for
-
HT5299 Thunderbolt to Gigabit Ethernet Adapter
Can 2 Thunderbolt to Gigabit Ethernet Adapters and Ethernet cable be used to create a long Thunderbolt cable?
-
HOW TO ASSIGN F4_VALUE_HELP FOR A REPORT OUTPUT FIELD???
Hi Gurus, Can you please help me out in assigning F4_VALUE_HELP for a report output field where it is taking value as the input parameter....... If possible please help me out with some sample code .... Regards, Santosh Intelligroup
-
Problem with DimensionBuilder (Business Objects Financial Consolidation)
Description of Problem or Question: Hi all, i try to create a new Dimension as described in the help by switching into "Definition Mode" of the Dimensionbuilder. In "data sources" I select the "amounts" folder and Select File -> New -> Dimension. Unf
-
How to remove the border of an Adobe Form Image Field
Hello everyone I am using Desinger 8.0. Form properties: Preview type = Print Form (One-side): I am using an "image field" to include a image from the transaction SE78. There is always a box arround the image. How can I remove that box? I am using th
-
Sort JCheckBox table column using Collections.sort()
Hello, I'm trying to add a JCheckBox column to a JTable component but am having a problem with sorting. The problem is that I don't know how to do it. I've tried several different ways without any luck. I would like to use the "java.util.Collections"