How to tell AE CS6 to use bundled Mocha rather than Pro?
I recently upgraded my bundled Mocha from AE CS6 to Mocha Pro 4, but for some unknown reason, it won't let me export shape data in Mocha. There seems to be no data at all, as even trying to paste in Notepad results in nothing. Tracking data, however, works fine (both in AE and Notepad).
Since I cannot figure out any solution in Mocha, the only thing I can do is use bundled Mocha rather than Pro... but I do not know how to tell AE to use bundled Mocha rather than Pro when I click 'Track In Mocha' (...a setting which was changed when Pro was installed).
Does anyone know where/how I can switch it to Mocha bundled when you click on Track In Mocha? (or, does anyone have any idea why Pro would not export shape data, whereas the same project in bundled Mocha did?)
If anyone has any answers or theories, please let me know ASAP, as I have a project I'm trying to complete, and (as luck always has it) the weekend is now upon us, and support is closed over the weekend.
I tried connecting MBP and TC via Ethernet - after verifying the settings that you suggested - and it does not work: if I turn Airport off, Time Machine says it can't find the TC
Any other sugestions?
Ok, then ethernet is not getting an ip address from the TC and is plugged in wrongly..
You still didn't give me any idea of what actual model the linksys is.. and why is it in the network.. Is it a modem router?? If you have cable internet just throw it away and use the TC.
If you have the linksys as modem, then bridge it.. turn off wireless and run pppoe client on the TC.
If the ISP does not allow pppoe client mode then simply use the TC in bridge. Turn off all wireless in the linksys and just use the TC.
Still need info on how everything is setup to analyse the problem.
Similar Messages
-
How to connect the database (JDBC) using service name rather than SID
How should we make the connection to the database using service name. Initially, we are using the SID to make the database connection, with following setting in the data-source.xml in OC4J using ABCDB as the SID.
<data-sources>
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="jdbc/ABCDB"
location="jdbc/ABCDB"
pooled-location="jdbc/OracleDSPooled"
xa-location="jdbc/xa/OracleDSXA"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="ABC"
password="ABC"
url="jdbc:oracle:thin:@191.1.4.126:1521:ABCDB"
/>
</data-sources>
It work, but now we need to make the connection using this service name ABCSERVICE, but it doesn't work in the OC4J (JDBC). May I know how should we handle this connection?
Thanks and Regards,
PangFinally, I got the solution to make the database connection using service name, with putting the tnsname setting in URL portion.
url="jdbc:oracle:thin:@(description=(address=(host=191.1.4.126)(protocol=tcp)(port=1521))(connect_data=(SERVICE_NAME = ABCSERVICE)))"
And now, it is working fine.
Regards,
Pang -
I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites? This is so I can keep my free ones for personal projects but also so they can pay for their own hosting. I am happy to set it all up for them but not sure what to do.
Hi
You can use their BC login details and use them , which on publish the site will be under their account.
Please change the BC login from Edit > Preferences > Publish > Switch Accounts , for Mac it would Adobe Muse > Preferences
Thanks,
Sanjit -
I use Mail for my email messages. How do I attach a file as an icon rather than showing the full text in the message box?
Glad you got it working! Incidentally, if you have a relatively new Apple mouse (Magic Mouse or Mighty Mouse should work), you should be able to enable right-click, if you'd like it, by going to System Preferences - Mouse - and turning on "Secondary click". Third-party mice, like Logitech or Microsoft, should have right-click automatically.
Matt -
How to set iPhoto to use yahoo webmail rather than mail.app
When emailing from within iPhoto using the email icon or via the share menu option in the task bar, mail.app launches. I prefer to use (Yahoo) webmail, rather than use an email client, so how do I change this setting?
Thx in advance.Mansel
Simply: you can’t, I’m afraid. This feature requires an E-Mail Client that supports Apple Script. Yahoo Mail is a service (not an client) that’s accessed via a Web Browser and it’s not Apple Scriptable.
FYI:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD -
How can i move songs to my playlists using my iphone rather than computer?
How can I move songs to my playlist using my iphone rather than my computer?
@allamb & stephanW
I found this thread via a search, I have a new iphone 5 (also i am completely new to iphone, having been the last few years on android) and i have spent 20 minutes trying to figure out how to add a song to a playlist.
You see i sit a work and listen to dozens of tunes, and i want to add a paticular song to a particular play list, and low and behold I can't, excuse my special characters but "What the f#%k itunes/apple??? - how can this be? Such a commonly needed function and for itunes to be the number music player in the world not to have this feature is ludicrus.
I am lucky that i only have about 500 songs on my iphone thus far, i feel sorry for stephanW with 4000+ !!
Apple - please fix - this is schoolboy programming stuff... -
I have a separate apple id and my daughter bought a song using my ID rather than hers. She was playing on my computer and bought it, thinking it would download to her phone through the cloud. Now I've got this song that I don't care for and have no use for. Is there a way to get it to her ID short of burning it on to CD and then uploading it to her phone?
sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde -
How do I display external monitor as sole display, rather than mirroring, with lid open?
sudo nvram boot-args="iog=0x0" restart to take effect
-
HT4863 Can I use g-mail rather than outlook?
Can I use g-mail rather than outlook with icloud?
Welcome to the Apple Support Communities
Outlook is a mail program, and Gmail is a mail service. You can't use an iCloud mail with Gmail because Gmail can only be used with Google mail. If you don't want to use Outlook, you can set up your iCloud mail using this information > http://support.apple.com/kb/HT4864?viewlocale=en_US
Also, you can access to your iCloud email on http://www.icloud.com -
ThreadReaper object used with finalizer rather than finalizer on Timer?
Timer class has threadReaper object used with finalizer rather than finalizer on Timer itself, can anyone explain the following snippet. what is the advantage of keeping the finalize in its references rathe rthan in the original object itself.
* This object causes the timer's task execution thread to exit
* gracefully when there are no live references to the Timer object and no
* tasks in the timer queue. It is used in preference to a finalizer on
* Timer as such a finalizer would be susceptible to a subclass's
* finalizer forgetting to call it.
private Object threadReaper = new Object() {
protected void finalize() throws Throwable {
synchronized(queue) {
thread.newTasksMayBeScheduled = false;
queue.notify(); // In case queue is empty.
};skakita wrote:
Now I am getting something. If some-one subclass the Timer class and they forgot to call the finalize on the Timer... So they have done in this way. Thank u kayaman.Just in case you're interested, that pattern is called a 'finalizer guardian'. You may find it on Google.
Winston -
Is it possible to create a drop down menu using form fields rather than text?
Is it possible to create a drop down menu using form fields rather than text?
Yes, correct - values of form fields. If one is blank, then the field would be blank - yes? If two or more have the same value that is fine.
A standard dropdown ... As shown here. If there is an easier way to do this, I'd love to hear your suggestions. Thank you! -
Revision: 7120
Author: [email protected]
Date: 2009-05-19 23:46:06 -0700 (Tue, 19 May 2009)
Log Message:
Switched to using "use namespace mx_internal" rather than using explicit namespace scoping (e.g., mx_internal::foo) in RichEditableText and its related classes.
Removed stale import statements.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Carol
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/TextArea.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/TextBase.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/RichEditableText.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/RichEditable TextContainerManager.asI'm more of a 1.3 chick myself, but the words are the same just in a different language.
1. Is Tomcat running?
2. Have you configured the ajp13 connector on 8009 in Tomcat? (Should it be ajp13 for Apache 2.0? - I really must upgrade) -
How to tell PDDoc.Save() to use CombatibillityLevel 1.4?
My application is using OLE to open PDF Files in Acrobat 9 and store them optimized for fast web access, again. Unfortunately, Acrobat stores the files as PDF 1.7 even if they were PDF 1.4 before.
Is there any possibility to tell Arcrobat 9 to use PDF 1.4 (no matter if generall configuration or OLE command)?
I´ve already tried to set the compabillty level in the distiller configuration but it seems, that PDDoc.Save always ignores these configurations.ok, thank you very much. It seems I have to look for a third party tool to convert my PDFs to PDFs with fast web access enabled. Just one last question: Is there a way to configure my Acrobat Installation to always save any pdf in PDF Version 1.4 (like the CombatibillityLevel Setting in Distiller)?
-
How to use a constant rather than a "getter"?
I'd like to refer to a constant rather than a property using a "getter" (accessor), but I'm not sure how.
For example:
<f:selectItem itemLabel="Option1" itemValue="#{Constants.MINIMUM}"/>
But of course this results in trying to call getMINIMUM(), which isn't what I'm trying to so.
Any ideas?hi ,
as far i know u cannot access a variable unless using a getter method !!
Viel spasss... -
How to play SWF with AxShockwaveFlash control using a stream rather than a file path?
My WinForm app downloads and plays SWF files from my server. Currently, I have an object of type AxShockwaveFlash called "flash" display the movie. The code I use to load the SWF is:
flash.Movie = "http://example.com/file.swf"
The URL is generated dynamically by the module based on what the user wants to watch. I'd like to know how can I load the SWF using a memory stream rather than a file path? I have already configured my server to process the url and return the contents
of the file. What I don't know is how to read those contents within my WinForm application as a stream instead of the default which is to just provide a URL path to the movie.
For instance I think I can use the Net.HttpWebRequest object to make an HTTP request, and read the response contained in the resulting Net.HttpWebResponse into a stream, but I have no idea what I could do to that stream to feed it to AxShockwaveFlash
A very similar question was posed on
stackOverflow but I cannot make sense of the answer (I'm quite inexperienced).
I'd appreciate your help,
-PatrickHi Patrick,
Since this issue is mainly related to a control which belongs to third-party, I would recommend you consider posting this issue on the same site like the following thread because issues related to third-party are not supported.
https://forums.adobe.com/thread/717505?tstart=0
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
ListCellRenderer Problem in Selection
Hi All, I Have a very unique problem. Here it goes.I have a JFrame as my top level container. On top of that i have JSplitpane.I have one panel (which has a JTree) on the left and another panel(which has a JList on the right).I have renderers for bot
-
Crawling iplanet portal server secured content.
Hi, All, I am new on the iplanet portal server. Try to come up a solution to crawling the secured content with a valid user name and password. What this the authentication mechanism of iplanet portal server keep the user's session? is iPlanet Portal
-
Embedded Flash video in Firefox plays for 3 seconds and stops
I looked at the forums for a solution but it didn't solve my problem. I'm running OS 10.5.6, Firefox 3.6.13, and Flash 10.1.102.64. I recently had my MacMini's memory upgraded to 2GB and when I got it back home, the problem arose. Per this forum, I t
-
While transfering data from my pc to my mac my pc crashed. what do i do now??
While transfering data from my old pc to my new mac the pc crashed what do i do now?
-
How to retrive the purchase agreement/promotion using sale order number
Hi , I am an ABAPER . I need a flow for *sale order to purchase agreement/promotion * My query is how to retrive the purchase agreement/promotion (VBAK-KNUMA is blank for all ) using sale order number ? Thanks Sree Edited by: Sree Merugu on Sep 11