How to tell fsck to ignore date check

My laptop isn't retaining the time and date after being powered off so sometimes when I power it on the fsck check spots that the last mount time is in the future and so I end up at the single user maintenance prompt.
Till I get the battery replaced how can I tell fsck to ignore the date being wrong?

Gen2ly wrote:This is generally a bad idea though. When I used Gentoo on an old laptop who's regular battery and CMOS was dead some programs would fail to compile if the time was incorrect. I can't think of any other programs that need a proper date but... their might be. I think that the best bet would be to set the clock everytime on boot. my two bit.
A la openntpd, yes. However, you'd still need to disable the boot-time fsck, because it happens before you (or NTP) can set the time.

Similar Messages

How to tell if up-to-date

I just recently installed XP SP2 that I have owned for a couple of years. I am an update freak, like I need the latest software updates. My question is how on Windows do I tell if my computer is up to date? i went to Microsoft's downloads page, and the place is a mess. Unlike Apples everything is everywere. And I have no idea what I need. Does Microsoft have like a software updater like Mac OSX?
Thank You
If this is in the wrong section, please excuse me.

compleidiot23 wrote:
I just recently installed XP SP2 that I have owned for a couple of years. I am an update freak, like I need the latest software updates. My question is how on Windows do I tell if my computer is up to date? i went to Microsoft's downloads page, and the place is a mess. Unlike Apples everything is everywere. And I have no idea what I need. Does Microsoft have like a software updater like Mac OSX?
It's called 'Windwos Update' and should be in the list of programms you get when using the 'Start'-button and then 'Show All Programs'.
Thank You
You're welcome anytime. Hope it helps.
If this is in the wrong section, please excuse me.
This is the right section. No need for sorry.
Take care
Stefan

Any new ideas how to tell Mail to ignore calls for sound?

I tried to be brief while making my question clear; I don't know if I was successful. I posed this question some time ago and received some very good responses from very knowledgeable people, but we weren't able to quite nail down a solution.
I produce audio using Pro Tools, which uses a Firewire device (Digi002) to record and play sound. However, this does not play Mac system alerts (they play through Mac's internal audio bus). When reading a Mail message that contains an audio or video file, or if I create a Mail message and attach an audio or video file, Mail 'seizes' (addresses) the Digi002, assuming that I want to play the file. Not only do I not want to play the files from within Mail, but once Mail has control of the Digi002, I cannot launch Pro Tools because Pro Tools needs the Digi002. I first have to quit Mail to free the Digi002.
I'd really like Mail to leave the Digi002 alone so that I can use Mail and Pro Tools simultaneously. But there is not a simple option to disable Mail's ability to play sound. Does anyone have any ideas how I might tell Mail to 'mind its own business?'
Thanks.

hi ernie,
rather a visual issue. what do you mean with "where do you want the send mail go to"?
email send within mail keeps those in the send folder even if "save send mail on imap server" is not ticked.
if i tick "send mail on imap server" what happens on the server side is that it creates a folder "send mail" in addition to its folder "send". but mail adds then the folder "send" which apparently does not contain the server saved send mails 'cause them are in "send mail". as this is quite inaccaptable at least i want to blend it out visually.

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

How to tell a select statement to ignore an index?

Dear All,
I have a big query that uses many indexes, but when i create a new index on the table accessed by the query, the query will try to use that additional index and so it performs badly. Can you tell me how to tell this query to ignore this index, because I need the index in other queries and I can't drop it.
Regards
Wassim

As Tubby already said, you need to create the index with statistics or at least analyze it just after the creation.
Else the CBO will think that the index is much smaller than all the other indices.
And therefore it will prefere the new index.
exec dbms_stats.gather_index_stats('mySchemaName','myIndexName',null, 100); You could also add "COMPUTE STATISTICS" to the create index command.
Sometimes it is useful to analyze the indexed column, but only if you have an uneven data distibution.
Edited by: Sven W. on Nov 6, 2008 10:02 AM

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hello Noushin,
It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
If you're using iOS 7, quit and restart the Contacts app on your iOS device:
Press the Home button twice to see preview screens of the apps you have open.
Find the Contacts preview screen and swipe it up and out of preview to quit the application.
Tap the Home button to return to your Home screen.
Wait a minute before reopening the Contacts app.
Turn iCloud Contacts off and back on:
Tap Settings > iCloud.
Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
Wait a few minutes before turning Contacts back on.
Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Regards,
Sterling

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

Can any one please tell me how to write labview program for data logging in electric motor bike.

Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?

Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

How to tell date of manufacture from serial number or how to look up?also when were 1q524 introduce

how to tell date of manufacture of 1q524 NC701AA-ABA from serial number or how to look up?
when were they first introduced?

dlkegarise
See here for the release date. For the serial number the typical format is to have the 4th, 5th, and 6th characters to reference when the product was built. The first character is the year date (Y) and the next two (WW), the week in that year it was made.
CCSYWWZZZZ
Hope this helps you and anwsers your questions. Regards.
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

TS4036 can anyone tell me how to restore an app with data to my new iphone 5s --from my old phone's back up from 11.15.13?

I am trying to find out how to restore an app's data from my old phone (4S) to my new phone (5s)...has all my passwords, etc.,
The old phone was backed up at the apple store on friday night.
thanks,!!

Welcome to the Apple Community.
You need to restore the whole phone, you can't just restore one app.

How is it possible to accrue data charges on wifi and asleep?

I'm not very happy with what's going on right now. My family of 3 shares a data plan of 8GB. I use under 1G, my husband <1G-1.5G and my son uses a ton so I decided to start looking into when/how much data is being used. In the previous billing cycle we went over by .009 on the final day of the billing cycle so what's the point to pay $10 for 2G and then not be able to change it back, therefore I took the stupid $15 overage charge for literally nothing. Anyway, I began to look through the time stamps and data usage per phone and it's pretty fishy. I'm being charged data at 4:06am, 10:06am, 4:06pm and so on. I have an iphone5, my husband has an iphone6 and my son an iphone 6+. Spoke with a rep tonight who claimed it may be due to my wifi losing connectivity and auto updating while connected to the LTE. That's a load. My whole family switched to Verizon because we couldn't ever get a good signal where we live with AT&T. My husband finally was forced to try a different company due to work and having to have a reliable network where we live. Not one dropped call, not one issue with wifi-Verizon was actually the miracle mobile provider I never knew existed. I waited a few months to make sure that it wasn't too good to be true and at once dropped AT&T totally and switched my son and my phone to Verizon as well. Having a teenager I knew we needed to probably have more data to be on the safe side but they can't seem to tell me how his data is being used and from 4/2 to today (4/14) he has used over 4G of data according to them. I pull up the dates and times and know for a fact that he was connected to home wifi for 1.6G+ and at his school wifi for another 1.6G+ and only 1.2G+ could have possibly been used off wifi. And I also see that there are massive amounts of complaints regarding this same type of sham. Not to mention I had added Family Base to be able to set limits on the data my son uses. But apparently since he's able to access the MyVerizon account from his phone (albeit he isn't an authorized user on the Family Base plan) he is able to go in and change any parameters I had set up. So tonight I go in and remove this feature from our account and now 30 minutes later I get a "Welcome to Verizon Family Base" text. WTH is going on??? I want real answers now or I will be looking into what others have done regarding this type of abuse. I had high hopes that this was going to be an honest, reliable network I could trust but this data business is insanely bogus. I'd like to hear back from someone regarding getting this researched and resolved. I don't want to feel discontent about something that has been going good so far. But I don't really feel like I should have to turn off all cellular data and close all open apps when I'm on wifi in order to keep from having data charged inappropriately. Thanks for your help and prompt resolution to my concern.

We are suffering from the same nightmare. It has been 8 solid weeks of phone calls to Verizon, then Apple, then to our cable service provider; daily data checks; overage charges; fights with the teen; HOURS of time invested in trying to get to the bottom of sudden and exponential jump in data usage. It started about a month after we upgraded my daughter's phone to a 5s. She is even more conscientious than me about not using it unless we are connected to wifi. For the first month, all was fine and we were going through the normal 2G. Then, with absolutely NO habit or usage change on our end, we were blasting through that like lightening. She was disciplined for the overuse. We added another 1G just to be safe. That went even faster than the 2G!!! We are now at 6GB at almost double the rate we went through 2!!!
I have kept a log of the time spent trying to solve this issue -- almost 5 hours of phone time alone. I literally have an AppleCare supervisor in my phone contact list because he is so perplexed!!!! After several Verizon technical support calls, we finally an agent who really wanted to help. She was convinced my daughter's phone had a rogue (malware) virus. Apple said it had to be the hardware. But when we really looked at the metrics -- both of our iPhones AND the iPad all all using data when on wifi, supposedly. We had one month of overage charges refunded, but with the problem not solved (reset both phones to factory settings; exchanged our modem for a new one !!!) I added -- you guessed it -- MORE DATA!!!
I didn't see how Verizon could be guilty of fraud -- after all, something of this magnitude would put the entire company out of business ultimately and it just doesn't make sense. But this is WAY OFF. Further, mid-way through our issue, the data category that was using the most data on my daughter's phone -- "Business Services" -- suddenly disappeared and now the main usage category is "Web Apps". Verizon. Really? It's a poor show.
I'm considering eating the contract termination fee and returning to AT&T. I'm not quick to assume, which is why I've spent months assuming some responsibility for the data, but it's very clear to us now that there is something very illegal happening here.

How to create user function in Data Functions in Query Designer?

Could someone tell me how to create user function in Data Functions in Query Designer?
I mean function like "NDIV0" in Data Functions.
SAP BW 3.x.
Query Designer (SAP BW 3.x)

Hi check the following URL, it gives how to add in Formulas in formula Builder, not in DataFunctions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f095592f-42f7-2a10-6ab1-c836a559b48f
Thanks
Reddy

How to tell when the load to start

Hi,
don't even know where to look for the answer, so I apologize
if this topic was already opened. Here's my case. In main flash
movie load another flash movie, where different items come from
left and right side of the screen (full screen window). After a
click on one item, all the item go the sam eway off the screen and
another movie loads. Question. How to tell the flash that first all
the items must go off the screen and then unload that movie and
load the new one?
THX for the help

jo3 wrote:I'm curious to know what time my system lost power, whats a good way to tell? I have been checking the logs to get the last entry times but was curioius if there were other methods of telling when the box's power was interrupted?
A rather ghetto way of doing it:
#!/bin/bash
log="/var/log/uptime-poll"
pollsecs=10
echo $$ > /var/run/uptime-poll.pid
if [[ -f "$log.tmp" ]]; then
echo "Lost power at: `cut -d';' -f2 "$log.tmp"`" >> "$log.log"
fi
while :; do
date +'%s;%D %T' > "$log.tmp"
sleep $pollsecs
done
...and in /etc/rc.local.shutdown...
killall $(cat /var/run/uptime-poll.pid)
rm /var/run/uptime-poll.pid
rm /var/log/uptime-poll.tmp
Last edited by Wintervenom (2009-08-29 06:37:29)

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

How to limit extract base on date condition in oracle goldengate?

Hi all,
I have a problem about date condition in extract parameter:
My extract parameter:
GGSCI>edit params ext1
EXTRACT ext1
USERID ggadmin, PASSWORD ggadmin
EXTTRAIL /u01/app/oracle/product/gg/dirdat/lt
DDL INCLUDE MAPPED
table test.chien, where (id >4 and TDATE>TRUNC(TO_DATE('01/01/2011 00:00:00','DD/MM/YYYY HH24:MI:SS')));
when I start extract, have a error:
+7. 2011-11-04 07:06:45 ERROR OGG-01157 Oracle GoldenGate Capture for Oracle, ext1.prm: Error in WHERE clause for TEST.CHIEN.+
I check where condition in the select statement is ok.
I don't know what is different between condition in params of extract and condition in select statement?
Please explaint to me and hepl me how to limit extract capture base date condition,
Thanks so much.
Omni
Edited by: user12378049 on 21:46 03-11-2011

Thanks for Stevencallan's reply.
I try again with Stevencallan's way, but not successful.
TABLE SCOTT.EMP, sqlpredicate "where EMPNO >4 AND HIREDATE> TO_DATE('01/01/1911 00:00:00','DD/MM/YYYY HH24:MI:SS')"; All Error is the same my old post:
2011-11-07 05:37:52 INFO    OGG-01517 Oracle GoldenGate Capture for Oracle, ext1.prm: Position of first record processed Sequence 26, RBA 21009936, SCN 0.1498876, Nov 7, 2011 5:34:14 AM.
2011-11-07 05:37:53 ERROR   OGG-00212 Oracle GoldenGate Capture for Oracle, ext1.prm: Invalid option for MAP: "where.
2011-11-07 05:37:53 ERROR   OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING. {code}
The trunc(date) to round date to the first time in the day. I think it is not reason of the error.
{code} The TRUNC (date) function returns date with the time portion of the day truncated to the unit specified by the format model fmt. The value returned is always of datatype DATE, even if you specify a different datetime datatype for date. If you omit fmt, then date is truncated to the nearest day. Please refer to "ROUND and TRUNC Date Functions" for the permitted format models to use in fmt.
{code}
I have no resolution for this problem yet.
Who had passed this case and had resolution? Please tell me your way
Thanks so much.
---Omni

How to tell fsck to ignore date check

Similar Messages

Maybe you are looking for