How to TNS configure an Instant TNS Client ?

Hi,
anybody arround who knows how to configure an Instant Client only ?
I ve got Crystal Reports 2008 SP2 Client ( basically it doesn't matter what kind of Client).
I want to run from the Crystal Reports 2008 SP2 Client an Oracle/TNS/Thick connection
to a Oracle Database Listener/Service/Server on an other host.
I have got the "Version 11.1.0.7.0 Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications
Package ":
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
I set the PATH to the required directory.
The Crystal Reports 2008 SP2 Client requests for the connection an Servicename, Username and Password.
The Crystal Reports 2008 SP2 Client ( or the client) comes up of course with a ORA-12154 for the Servicename.
I understand quite that the Servicename of the Crystal Reports 2008 SP2 Client must be resolved on the Client
by means of TNS to a hostname:port:Service to identify the Oracle Database Listener/Service/Server on the other host.
But how and where to setup TNS Nameing with "Version 11.1.0.7.0 Instant Client Package Version 11.1.0.7.0 Instant Client Package "?
Thank You
Martin Sautter

See the Instant Client FAQs :
http://www.oracle.com/technology/tech/oci/instantclient/ic-faq.html
To cut al long story short you need a tnsnames.ora - as you do this for a full client. Then set TNS_ADMIN environment variable to the location (full path) of the file.
Werner

Similar Messages

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

How to Download Configuration in Golden Client

Hi All,
How to Download Configuration in Golden Client.
Please help me in this regards.
Regards
Deekshitha.

Deekshitha,
All the configuration you have made will be assigned to a customizing request. You can view these requests in transaction SE10.
You will have to first release these requests (only the ones you require). Then the basis settings for your system will define to which client these request will move.
When requests are transported, all the related config will move to other systems.
Please contact your basis team as this is a very important process.
Thanks,
Srihari

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

How do I configure the ssh client timeout?

Hello,
I have X Server 10.4 setup and it seems any ssh session from a client gets timed out by the server in about 5 min or less. Can anyone point me to how I can configure this to last longer?
Thanks for any help.
Cheers,
-Brian
Mac OS X (10.4.9)

Edit the file /etc/sshd_config on the server and look for the lines:
<pre class=command>#ClientAliveInterval 0
#ClientAliveCountMax 3</pre>
The ClientAliveInterval is how frequently, in seconds, the ssh server sends a keepalive check if the connection is idle. Setting it to something like 60 will ping the line once per minute.
The ClientAliveCountMax states how many keepalives can be missed before the connection is dropped. A setting of 3 (with the above set to 60) means that if there's no response within 3 minutes the connection will drop.
You can uncomment and tune these settings to find the appropriate level of timeouts for your connection.

TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error

Unable to start listener service.
Running Oracle Database 11gr2 on Windows 7.
I just installed Oracle with the "install software only" option.
Already set up the instance, the database, the dictionary views, etc.
Created tsnames.ora, sqlnet.ora and listener.ora as shown below.
Before installing Oracle I followed the instruction on Oracle
documentation to install a Loopback Adapter.
It is set up as the primary adapter as indicated on the
instructions. The name is "gabylan" (previously the computer
name was "P4". I set up the "hosts" file as indicated, the oracle_hostname
variable, etc. as you will see below. I don't know if it's important to "uncomment"
the line on the "hosts" file for the "localhost" entry, I left it
as it was originally.
Services currently in "Started" Status:
OracleServiceorcl
Oracle orcl VSS Writer Service
OracleMTSRecoveryService
OracleOraDb11g_home1ClrAgent
OracleServiceorcl
Below is a summary of the error message and some information
about my system setup to help you diagnose my problem.
===============================================================================
c:\Users\Public\myscripts>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-SEP-2012 13:48
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
c:\Users\Public\myscripts> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-SEP-2012 16:17:16
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=gabylan)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
================================================================================
My "hosts" File: (c:\windows\system32\drivers\etc\hosts)
# localhost name resolution is handled within DNS itself.
#     127.0.0.1 localhost
#     ::1 localhost
192.168.5.5          gabylan          gabylan
=================================================================================
c:\Users\Public\myscripts>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gabylan
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b8f5:bbb0:cf8b:c735%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.5.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 335675468
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-B7-78-52-00-25-22-51-68-AB
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-25-22-51-68-AB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7538:173c:c202:4985%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, September 18, 2012 11:37:37 AM
Lease Expires . . . . . . . . . . : Wednesday, September 19, 2012 1:45:01 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234890530
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-B7-78-52-00-25-22-51-68-AB
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
=================================================================================
# sqlnet.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\sqlnet.ora
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
# OTHER OPTION FOR AUTHENTICATION IS: SQLNET.AUTHENTICATION_SERVICES= (NTS)
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME, EZCONNECT)
ADR_BASE = c:\app\oracle\
====================================================================================
# tnsnames.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\tnsnames.ora
orcl =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = gabylan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
====================================================================================
# listener.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gabylan)(PORT = 1521))
SID_LIST_LISTENER =
     (SID_LIST =
          (SID_DESC =
     (ORACLE_HOME = c:\app\oracle\product\11.2.0\dbhome_1)
     (SID_NAME = orcl)
ADR_BASE_LISTENER = c:\app\oracle
=================================================================================
c:\Users\Public\myscripts>ping gabylan
Pinging gabylan [192.168.5.5] with 32 bytes of data:
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.5.5:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
=================================================================================
Some related environment variables on my system:
COMPUTERNAME=GABYLAN
FP_NO_HOST_CHECK=NO
HOMEPATH=\Users\oracle
LOGONSERVER=\\GABYLAN
ORACLE_HOME=c:\app\oracle\product\11.2.0\dbhome_1
ORACLE_HOSTNAME=gabylan
ORACLE_SID=orcl
ORACLE_UNQNAME=orcl
SQLPATH=c:\users\public\myscripts
USERDOMAIN=GABYLAN
USERNAME=oracle
USERPROFILE=C:\Users\oracle
==================================================================================
Summary from V$INSTANCE VIEW:
INSTANCE
NAME    HOSTNAME STARTUP_T STATUS DATABASE_STATUS ACTIVE_ST
orcl GABYLAN STARTED      ACTIVE NORMAL
=================================================================================
Thanks,
Gabriel

I am getting the same error while starting or stopping the listener
LSNRCTL> start CSCLIST
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> stop CSCLIST
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CSCINDAE708070)(PORT=152
2)))
NL-00303: syntax error in NV string
TNS-01153: Failed to process string: (DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)
(HOST=)(USER=Manager(REMOVE)))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=CSCLIST)(VERS
ION=186646784)))
Pls help
Listener.ora:
# listener.ora Network Configuration File: D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
CSCLIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CSCINDAE708070)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_CSCLIST =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\bin\oraclr11.dll")
ADR_BASE_CSCLIST = D:\Sagaya\11gDBhome

How do you configure a farm name in RDS 2012?

I understand Remote Desktop Services has undergo some drastric changes.
How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
Boudewijn Plomp, BPMi Infrastructure & Security

You don't. You create a collection. A client connects to the Connection Broker and then is redirected to the collection it is connecting to. The collection name is embedded in the connection file that the client downloads from RDWeb or
the RDWeb feed.
A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops).
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

Can Time Capsule be used as a time machine on a Windows Server. Is this possible, and how do i configure this?

I like to use the new TC in my office as a time machine on a Windows Server. Is this possible, and how do i configure this?
In fact my plan is to make the first back up by connecting to the server via an ethernet cable, but thereafter i like to bring the TC to my home and perform the incremental backups over the internet. This is for safety reasons, in case for example the office is broken into, or flooded, or fire (god forbid).
I sincerely hope it is possible, and not complicated.
Alternatively i would not mind replacing our current Windows server 2003 with an Apple server, but all computers in the network (except mine) are Windows 7 or 8. Would it work?
Thanks in advance.
Paris

I will consider the WD My Cloud device.
It is a NAS.. it is designed to provide a cheap centralised file storage.
What is NAS?? http://en.wikipedia.org/wiki/Network-attached_storage
A file server like windows uses heaps of power to do very little.. in your setup.. In most setups like SBS it will do exchange server and provide a heap of useful connectivity to your clients.
Since you are not using the windows server in anything but simple file serving you can replace with a NAS..
Problem with the TC is, it is a router with a hard disk inside.. designed specifically for Time Machine.. it fails to provide what a NAS does.. easy access to any clients, local or remote.. TC is designed by apple for apple and the rest of world is not really invited to the party.
It provides no backup.. no data protection.. and is so specifically apple orientated I do not think it works at all well with windows.
For a simple example.. windows will have file issues with large files.. because it is only NTserver FAT32 to windows.. bad luck if you have large files.. !!
Plainly if you use active directory in windows that facility is gone.
I just like Apple products, find them more stable than Windows and easier to use. Plus i can access the server from home if it is an Apple Server.
If you only need remote access for yourself that is fine.. too bad for the windows clients I guess.
Or you open it up to the world and bad luck for security.
Apple do not design for mixed environment.. in fact with the TC there is no provision for windows access officially at all.. so anything you do is a fudge.
You can use the TC for your Mac backups within the network.. that is fine. Apple provide no software at all to help with your windows clients.

How to properly configure a home network using both Mac and PC computers

Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
4) All three computers use a wireless connection to the AEBS.
I would like the following:
1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
2) All computers to be able to access the USB printers and ext HD.
3) The two Macs to read/write to each other with password access
4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
Any advice and help is greatly appreciated.
Thanks,
Andrew

Andrew,
What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
1. Network Basics
First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
2. Network Topology
Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
Default Gateway 10.0.1.1
IP Address 10.0.1.(your choice)
Subnet Mask 255.255.255.0
3. File-sharing.
3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
4. Printing
I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

How do i configure my lion server to update my other workstations

I have a brand new Mac OS X Lion server. How do I go about setting up my Lion server to download updates for my other workstations (about 30). These workstations are mixed with Macbook Pros using 10.6 as well as some using 10.7, iMac's using 10.6 and 10.7 and Mac Pros using 10.7.
What do I need to do on the client side as well so that they can download from my OS X server. I have created a DNS entry for my OS X server in my DNS as well as a static IP.

How do I go about setting up my Lion server to download updates for my other workstations
Use Server Admin to turn on the Software Update Server. Give it a while to download all the updates. Done.
What do I need to do on the client side as well so that they can download from my OS X server
How do the clients connect to the server? Are they using central accounts via Open Directory? or are they local accounts on each machine.
If you're using Open Directory you can control the software update server via Workgroup Manager, otherwise you'll need to walk through each machine and update its software update configuration. Apple have a tech note that describes how to manually configure each client to use your server.

How do you configure the server in this situation?????????????

Hi,
We have Oracle 10.2 and Windows 2003.
We have Oracle on Cluster (with Windows software).
When the System are without cluster all its OK!!!!!!
We have 2 Resources Cluster Group: Oracle and Applications.
We have Oracle in Oracle cluster group.
We have W Drive and a ftp program in Application cluster group.
We have C drive in both nodes. We have installed Oracle in both nodes but we have W drive only associate to the Active Node because is a Cluster resource (Application cluster group).
All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
We think to put UNC pathes instead of W but its not possible (Metalink: Note:290703.1)
How do you configure the server in this situation?????????????
Thanks!

We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

How i will configure handling unit(3shirt in one pocket and 10 pocket in ca

Hi MM guru,,,
i want to know how Handling unit is configured..
actually my client is garment company...
senero is shirt pack in one pocket..and 10 pocket pack in one cartoon...
then how i will configure this and in sales order what will be material code.....i have confusion
kindly suggest me...
how i will sale the cartoon.from which material code
kindly suggest me in detail
Regards
Aqueel

Packing Material ---> MM01
material group packing materials( sales: general/plant)
packing material type
Raw material/Finished Goods
Mat group pack matls (Basic data)
Note : System picks the packing materials based on the packing material group defined in the raw material/ Finished Goods .
PACKING INSTRUCTION
1.POP1
packing material and Refrence material is given.
(with target quantity )
2.POP1
packing instruction made and packaging material is given.
(with target quantity )
3.POF1
Condition record
Reference material for Material packed .
ok ,

TNS Error: ORA-12541: TNS: no listener.

I have installed Oracle 9i on machine in Windows XP. When I try to open the database SID in the Enterprise Manager, it gives me TNS Error: ORA-12541: TNS: no listener.
I have checked the Oracle Net Configuration:
Protocol: TCP/IP
Host: PNR18
Port: 1521
In the xp administrative tools, I found that the listener is on start.
When I try to test trough ' Net Configration Assistant' getting same error, similarly with Net Manager.
I don't know if I am using the correct protocol in my case of standalone installation.
Any advice/correction? it would be appreciated. I am giving all the information of TNSNAMES.ORA, LISTENER.ORA, SQLNET.ORA, which is on my machine.
Thanks in advance.
# LISTENER.ORA Network Configuration File: #C:\oracle\ora90\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNR18)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora90)
(PROGRAM = extproc)
# TNSNAMES.ORA Network Configuration File: #C:\oracle\ora90\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNR18)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
# SQLNET.ORA Network Configuration File:
#C:\oracle\ora90\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)

First of all Thanks for suggestions for solutions but still SAME PROBLEM:
Case-1::
I tried according to your suggestion, still SAME error !! I have also configured new DB
with Enterprise MAnager Configuration Assistent - during DB creation same error occured.
1) I have seen in XP service where all listener is running as well as OracleServiceORCL
is also running.
2) OracleOraHome90TNSListener also running with other listeners!
Case-2::
Dear I also delete listener and create new one and also configured Database Description
and tried to do so but still same problem while I am TESTing it with - Net Manager /
Net Configuration Assistant. I have also tried
C:\TNSPING ORCL - it is giving 'ok' result
but when I am using C:\LSNRCTL START listener - it gives me following errors.
Service OracleOraHome90TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 1056: Unknown error
Thats the whole story....hope this time you will find easy to give solution.
All files after your suggestion are as follow:
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora90\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNR18)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
# LISTENER.ORA Network Configuration File: C:\oracle\ora90\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNR18)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = C:\oracle\ora90)
(SID_NAME = ORCL)
(SID_DESC =
(PROGRAM = extproc)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora90)
# SQLNET.ORA Network Configuration File: C:\oracle\ora90\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.PREFERRED_SERVERS =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNR18)(PORT = 1521))
SQLNET.AUTHENTICATION_SERVICES= (NTS)

How do I configure the number of connection in the pool for webservice axis

Hi
How do I configure the number of connection in the pool using xml.
We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
We do not want to do any modification in the code for this.
Is it possible to set socket timeout also in the wsdd file.
Your resolution will be really helpful for us.
Thank You
Ottran

Export them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD

How to TNS configure an Instant TNS Client ?

Similar Messages

Maybe you are looking for