How to trace a deleted record from a Infotype
Hi all,
My question is simple.
When a record is deleted from a Infotype.
How do I trace it?
Which table do I have to look at for the list of deleted records in a day.
The second question is," Does this table show the complete deleted record or does it just tell us, which Infotype and which date it was deleted."
Warm regards,
Hari Kiran
Hi,
Change log function is shut off by default. If you want trace deletion action of a certain infotype, pls check following steps:
1-Tcode:SCDO
2-Config view:T77CDOC
3-Report:RHCDOC_DISPLAY
After step1 and step2, report RHCDOC_DISPLAY will show the deletion records of a certain infotype
Br,Kee
Similar Messages
-
How to handle the deleted records from R3
Hello,
We have created a generic data source on a database table in R3 side and now we have a case where there is a huge volume of data gets deleted and new records get updated every day.
By doing a delta load we are able to load the New records and also the changed ones but we are unable to identify the deleted records from that table and move them to BI for deleteing those records in BI also.
Can any one please suggest a solution for the handling the deleted records.
Thanks,
Ravindra.we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M. -
How do you delete records from table with data in a select option
how do you delete records from table with relevant to data in a select option..how to write coding
Hi,
Try
if not s_select_option [ ] is initial.
delete * from table
where field in s_select_option.
endif.
commit work.
Be careful though. If select option is emty, you will delete the entire table.
Regards,
Arek -
How to delete records from standard maintenance view
Dear Sir/Madam,
i want to delete records from standard view " v_mmim_rep_cust "
This is a standard maintenance view , used in MBLB report.
here i found the records with different report name but same fields as shown below...
REPORT TABLE NAME FIELD NAME
RM07DOCS MKPF BKTXT
RM07DOCS MKPF BLDAT
RM07DOCS MKPF BUDAT
RM07DOCS MSEG ANLN1
RM07DOCS MSEG ANLN2
RM07DOCS MSEG APLZL
YRM07DOCS MKPF BKTXT
YRM07DOCS MKPF BLDAT
YRM07DOCS MKPF BUDAT
YRM07DOCS MSEG ANLN1
YRM07DOCS MSEG ANLN2
YRM07DOCS MSEG APLZL
I WANT TO DELETE THE RECORDS FROM THE VIEW WITH REPORT = YRM07DOCS.
PLEASE HELP ME.
Thanks in Advance,
Dastagiri.Dear Sir,
when i did so , it displays a message that " entry mseg zeile must not be deleted ".
hense i went through writing a program to delete the records from table mmim_rep_cust
but it says that record not found.
program logic :
delete from mmim_rep_cust
where report in report
and TABNAME in TABNAME.
if sy-subrc = 0.
write ' RECORDS DELETED SUCCESSFULLY'.
else.
write ' RECORD NOT FOUND'.
endif.
please guide me to delete the records from the view.
Thanks in advance,
Dastagiri. -
Delete recording from VSMS server
In VSMS server, how can delete recording from storage? and can delete some of recording, like 1 hour from all recording or 1 day?
Hello mshah,
This is not recommended at all to delete recording files manually or for certain durations since every files has reference id created which are being associated to cameras.Deleting files in such can cause issue to the server.
What is the reason behind deleting those files from server?
Regards
Nadeem Ahmed -
how do i delete records from a file on my presentation server after a successfull read operation
Hi,
First store records in to internal table using giu_upload.
then read the records and then delete the records which ever u want based on some condition and download the records to the presentation server using gui_download
Rgds,
Prajith -
Deleting Records from Referential Tables
Hi,
Can anyone help me in deleting records from tables in a hierarcial manner. For e.g C refers B and B refers A. I need to delete data from all three tables related to a where clause in A.I tried using User_constraints and User_cons_columns views. But i am not able to find a hierarchial delete statement.
VenkateshDid you look into the option of specifying ON DELETE CASCADE for your foreign key constraints. That way, if you delete a
row from the master table Oracle will automatically go and delete the child rows. Take a look at the following script.
Here, when I delete a row from table A for NUM = 1 the child rows from table B (WHERE num = 1) are automatically deleted.
drop table b
drop table a
create table a (num number, name varchar2(40))
create table b (num number, name varchar2(40))
alter table a add constraint pk_a primary key(num)
alter table b add constraint fk_b_num foreign key (num) references a(num) on delete cascade
insert into a values (1, 'Test#1')
insert into a values (2, 'Test#2')
insert into b values (1, 'Referes#1')
insert into b values (2, 'Referes#2')
select * from a
select * from b
delete from a where num = 1
select * from a
select * from b
Sridhar,
Thanks a lot for your help.My exact need was to delete records in 50 tables starting with the key table for a specific condition in the key table.
Assume table A has 100 records,B 200 records,C 150 records,D 400 records, etc
When i want to delete some records in table A, i will not be able to do that as child records exists in table B and this structure will carry on till that last table in my application. How do i delete those specific records
Venkatesh -
Delete record from the form and from the database
hi,
i want delete record from the form and the database ,but the record is only delete from the from !!!
this is my code :
if //condition then
delete_record;
commit;
end if ;
Any solutions ??
thnxYou have unique key field(s) on the table you are trying to insert which actually restricts you from inserting the same value again.
When you are deleting the record and issue commit there is a record to be inserted in the table which is a duplicate that's why you are getting this unique error.
As oracle is not able to insert your commit fails and stops your deletion of record from table -
Delete records from tableA which are not in tableB
Table A contains milions of records which is the best way to delete records from tableA which are not in tableB
delete from tableA where empno not in (select empno from tableb)
or
delete from tableA where empno not exists (select empno from tableb
where b.empno=a.empno)
any helpHi
If you can do this, do with this:
create table tableC
as select a.*
from tableA a,
(select empno from tableA
minus
select empno from tableB) b
where a.empno = b.empno;
drop table tableA;
rename table tableC to tableA;
Ott Karesz
http://www.trendo-kft.hu -
How can i recover deleted files from my mac book
how can i recover deleted files from my mac book
Check out software like Data Rescue 3 (and you need an external drive to recover to)
-
Is there a way to delete records from MDM automatically?
Is there a way to delete records from MDM automatically?
I am able to import the data automatically through MDIS, but I have to delete the data first. Itu2019s possible to do it ?Hi Adam,
Current scenario
USER1: call ME to delete old catalog data
ME: open the MDM & delete it manually
USER1: Transaction to extract new data file
MDIS: load the data to catalog
As per your requirement, you should save map in following way which can solve your purpose. Create a XML file which should consist of new and existing records. So in import Manager, for newly added records you need to set Default Import Action as Create and for existing records you should use or set Default Import Action as Replace and then should save in map.
So using this every-time if new record comes (not available in data manager), it will get created and for existing record (already available in Data Manager) it will replace (which means delete the existing record (old catalog data) and create a new record).
Regards,
Mandeep Saini -
How to update or delete records in a Complex View in Forms?
Hi,
I have a requirement to create a Form by using Complex View. Insertion is possible but updation and deletion is not working properly . I got FRM-40501 Error. I need How to update or delete records in a Complex View in Forms?
Thanks & Regards,
Hari BabuDepending on how complex your view is, forms is not able to determine how to appropiately lock a record, when you try to update or delete a record.
One approach to using complex views in forms:
1. Set the Key-mode of the block to "Non-Updateable"
2. Mark the column which can be used to build the WHERE-condition to uniquely identify a record with "Primary Key" = "Yes"
3. For doing INSERT, UPDATE and DELETE, create an INSTEAD-OF-trigger on the view.
4. Create your own ON-LOCK-trigger in forms which does the locking of the records to update. -
How can i retrieve deleted sms from my iphone
how can i retrieve deleted sms from my iphone 4s?
If you backed up your iPhone after the texts were made and before you deleted them you can Restore them in iTunes from your backup.
-
How can I prevent deleted mail from ending up in "All Mail" and "Archives"?
To my horror, I emptied these boxes and lost all my mail from all my boxes .
All mail also disappeared from my iPad, I suppose because they are "synched"
(Also, no offense, but why do I need to enter this question multiple times?)
Thanks for any thoughts.I'm having a similar but slightly different problem. My company just migrated to Gmail, and it's saving mail drafts every 30 seconds into my Trash folder.
I unchecked the "Show in IMAP" preference in the Gmail settings, but my Drafts folder completely disappeared. I went back and checked it and the folder reappeared (with my drafts still in there).
I like the idea if starting an email on my laptop and having the option of finishing it on my iPhone or iPad, so only saving Drafts locally would not be ideal. -
how do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone)
They are not taking up storage space. Apple knows you installed them at one time (="purchased", whether you paid money or not), and merely keeps a list so that if you wish to reinstall any of them on this or a future device, you can. This is useful if maybe you deleted them due to space constraints, and now have a device with more memory and wish to reinstall.
It's also useful for taking a trip down Memory Lane looking at all the useless apps you installed once then immediately deleted once you realized they were total garbage ...
Maybe you are looking for
-
To pass perner in Function Module
Dear All, I have a requirement where I have to send a mail to the new hired employee at the time of creation of IT0105- subtype 0010(email-ID) I have wriiten a code for this IT STYP Feild F
-
How can i see my warranty if my ipod is cracked screen or open from falling
how can i see my warranty of my cscreen is cracked and it opens
-
Report Group 1SIP Consistency Check
SAP reccomends the following to be consitency check for CO customers for system copy: "CO customers: An additional consistency check can be performed by running the report group 1SIP before the system copy in the source system, as well as after the c
-
I have a problem that I hope has a simple answer, but I cannot for the life of me figure it out, hopefully someone out there can help me! I am accessing the following section of a wsdl: <s:element name="Login"> <s:complexType> <s:sequence> <s:element
-
I am using adobe flash cs4 and actionscript3 my project consists several different layers using classic motion tween option available in flash cs4 my project works fine when I test the movie using Ctrl+Enter but after exporting my animation remains s