How to trigger provisioning - after approval task failed but data corrected

Hi,
We have a situation where the approvals are provided for the requests but approval task failed(denied) due to misconfiguration. But really all the approvals are provided by the required personnel. So, we need to manually correct the data and trigger the provisioning. Could you please advise on how to manually/otherwise trigger the provisioning in this scenario
Thanks,
Sudhakar

Thanks Kevin. We could locate these requests and update the records in DB. But wasn't sure if we can trigger the automatic provisioning from there. I was thinking there may be a way to restart the workflow/provisioning from the point where it failed. That would be a nice feature to have.

Similar Messages

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger a standard workflow task in customizing program?

Hi experts,
Does any1 have any ideas about how to trigger a standard workflow task in customizing program? Is there any FMs can be used to do this?
Thx in advance. Points will be rewarded.
Vincent

will followiign Fms help -
'SWE_EVENT_CREATE'
SWR_START_WORKFLOW
SWU_START_WORKFLOW

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

Restore from your iTune backup.

How to trigger Process after Event

Hi,
I am trying to trigger a PC after an Event. This event is another PC variant. I know this will be Event= RSPROCESS but, How to get the value for Parameter.
Thanks in Advance

For Process Chain Adhoc scheduling
1)You can make the process chain to be trigered by an event.
You do so by having the Job that start the PC start after an Event.
Then you define your set of job's (tcode: SM37) and make sure these jobs fire the event that starts the PC.
There is an ABAP program you can use that fires events (FM -> BP_EVENT_RAISE).
try this in your ABAPcode:
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'Your Event'
eventparm = 'START'
target_instance = ' '
EXCEPTIONS
OTHERS = 01.
schedule ur process chain,
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3) u can do this by an alternate way--> click start process, --> selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values , and activate it.

How to reopen completed workflow approval tasks?

Hello - we are using OOTB approval workflows associated with a SP list. If a task is in "completed" status because the approver it was assigned to approved it, but it's not actually completed because the user approved it prematurely in error, how
can I reopen the task?
Thanks,
Chris

Hi Chris,
We cannot reopen the task to approve or reject it again even thought we restore the task to a version before completed. Because once the task is in "Completed" status, it will be locked by the workflow and cannot be edited.
For a workaround, you can start the approval workflow manually and approve or reject it again.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Download After Effects 2014 failed but can't uninstall - error5

The attempted install of After Effects 2014 has failed which I'm informed of when I try to launch.
The message also tells me to uninstall and reinstall.
When I attempt this, however, the uninstaller only shows Adobe Type Support CS5 and this also fails if I try to use it.
I've restarted and run the cleaner tool which has now removed the previous version of AE.
What the hell is going on and what do I do?
OSX Mavericks.

In this case, the Error 5 is an AMT error at launch, not the corrupted file error you're thinking of. Most likely there is some bad or missing data in the AMT database files (PCD/Caps), and using the newer CS5 Clean script to remove just the CS5 product data, then reinstlalling, would solve the issue
http://forums.adobe.com/message/3008803#3008803 may also help.
CC Cleaner tool - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Regards
Rajshree

How Can I Make This Sql Query To Load Data Correctly (sql server)?

Hi guys
I have a datagridview where the third column is a custom column with all days
of a month. It takes data with a query who distinct the column Improve.
Here is the code :
Private Sub fill_impro()
dgImprove.Rows.Clear()
Try
Dim i As Integer = 0
Dim query As String = "SELECT Improve,Price,Active,Idate FROM (SELECT Improve,Price,Active,Idate, ROW_NUMBER() OVER (PARTITION BY Price ORDER BY Price) AS rn FROM tblImprove) tmp WHERE rn = 1"
cmd = New SqlCommand(query, clsMSSQL.con)
myDR = cmd.ExecuteReader
If myDR.HasRows Then
While myDR.Read
dgImprove.Rows.Add()
dgImprove.Rows(i).Cells(0).Value = myDR.GetDecimal(myDR.GetOrdinal("Price"))
dgImprove.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Improve"))
Dim myday As Integer = DatePart(DateInterval.Day, myDR.GetValue(myDR.GetOrdinal("Idate")))
dgImprove.Rows(i).Cells(myday + 1).Value = myDR.GetInt32(myDR.GetOrdinal("Active"))
i = i + 1
End While
End If
myDR.Close()
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Σφάλμα")
End Try
End Sub
And here is the result :
http://i60.tinypic.com/28gwf83.jpg
The column Active value is 1.
The problem is that column Active values are missing (red values in image).
How can i fix that ?
Thanks in advance

try like this
Dim Price As Decimal
Dim improve As String = String.Empty
While myDR.Read
Dim myday As Integer = DatePart(DateInterval.Day, myDR.GetValue(myDR.GetOrdinal("Idate")))
If Not (myDR.GetDecimal(myDR.GetOrdinal("Price")) = Price And myDR.GetString(myDR.GetOrdinal("Improve")) = improve) Then
i += 1
dgimprove.Rows.Add()
dgimprove.Rows(i).Cells(0).Value = myDR.GetDecimal(myDR.GetOrdinal("Price"))
dgimprove.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Improve"))
Price = myDR.GetDecimal(myDR.GetOrdinal("Price"))
improve = myDR.GetString(myDR.GetOrdinal("Improve"))
End If
dgimprove.Rows(i).Cells(myday + 1).Value = myDR.GetInt32(myDR.GetOrdinal("Active"))
End While
and change your sql statement to just
SELECT Improve,Price,Active,Idate FROM tblImprove WHERE Active = 1

How Can I Make This Sql Query To Load Data Correctly (sql server 2014)?

Hi guys
I have a datagridview where the third column is a custom column with all days
of a month. It takes data with a query who distinct the column Improve.
SELECT Improve,Price,Active,Idate FROM (SELECT Improve,Price,Active,Idate, ROW_NUMBER() OVER (PARTITION BY Improve ORDER BY Improve) AS rn FROM tblImprove) tmp WHERE rn = 1
And here is the result :
http://i60.tinypic.com/28gwf83.jpg
The column Active value is 1.
The problem is that column Active values are missing (red values in image).
How can i fix that ?
Thanks in advance

Hi,
Maybe you can try below code, I have changed the order by of the row_number(). Therefore it will sort on the date, and you will get the first date icm with improve cell. If this is not what you are looking for, please explain what the output should be.
SELECT Improve,Price,Active,Idate
FROM
SELECT Improve,Price,Active,Idate, ROW_NUMBER() OVER (PARTITION BY Improve ORDER BY ldate) AS rn
FROM tblImprove
) tmp WHERE rn = 1
Regards,
Reshma
Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered

Approval Task for role assignment

Hello again,
is there any manual for approval tasks with the SAP Provisioning Framework? There is a task group called Request new business role, but if I use this, the approver approves the request, but the status of the role assignment is "in process"and never changed to "OK".
I only found these manuals:
- How To... Create Approval Tasks in SAP NetWeaver Identity Management
- Implementing role approvals
But both documents didn't show an end-to-end role-request-and-approval workflow.
Thanks in advance.

Hello Matt, hello Peter,
the web-enabled task "Request New Business Role" and the including approval task are only examples.
To create own approval processes for your projects you have to understand how approval tasks and pending values work.
The following document shows the basics of PVOs (pending value objects).
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0d6b459-3456-2b10-209e-9e78ec9fd97b?quicklink=index&overridelayout=true
This is documentation of the release 7.0, which is not updated to 7.1. But basics of PVOs are still the same.
There is also a document which describes approval task for Release 7.1:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20b67ad5-c69a-2c10-9da2-9721b1cf749c?quicklink=index&overridelayout=true
Also a "How-To Guide" is available:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/904deabf-73b9-2c10-e8bb-8514dc3757f2?quicklink=index&overridelayout=true
I think this is enough to learn to create workflows in SAP IdM.
There is also a nice book available with detailed information:
EN: http://www.sap-press.com/products/Understanding-SAP-NetWeaver-Identity-Management-.html
DE: http://www.sap-press.de/2007
I think this will help you.
Best regrads,
Christoph Reckers

How to define custom event and how to trigger the defined event

hi,guys
hurry issue....................hope get help.
I am using oracle weblogic 10gr3 portal.and we choiced java portlet.as of now,we got some question about custom Event.hope you can give some idea....
thank you so much.
question detail:
1.for java portlet ,how to define custom event.
2.how to trigger this event.
3 about the data,may be sometime need to transit Biz data.
auctully,I just want to implements between two portlets communicate.
for example:
existing portletA,portletB.
portletA is a list,like:
A AA <button>
after I click this buttom,then portletB will be effect,it means they are interact with each other.
does anybody hit this issue before,if you solved pls share me .
thank you for you help....

Hello,
Please note that everything below applies to JSR168 portlets ONLY- JSR286 portlets and other portlet types handle events a little differently.
From inside your JSR168 portlet you can send an event during processAction or when receiving another event by using the PortletBackingContext object, such as:
import javax.portlet.ActionResponse;
import javax.portlet.ActionRequest;
import javax.servlet.http.HttpServletRequest;
import com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext;
public void processAction(ActionRequest actionRequest, ActionResponse actionResponse)
HttpServletRequest httpRequest = (HttpServletRequest) actionRequest.getAttribute("javax.servlet.request");
PortletBackingContext portletBackingContext = PortletBackingContext.getPortletBackingContext(httpRequest);
portletBackingContext.fireCustomEvent("customEvent", "This is a custom event");
To receive an event, in your .portlet file you just need to put in a "handleCustomEvent" tag specifying which method to call when the event is received, such as:
<?xml version="1.0" encoding="UTF-8"?>
<portal:root xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0"
xmlns:portal="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0 portal-support-1_0_0.xsd">
<netuix:javaPortlet title="Listening Portlet" definitionLabel="yourPortletName">
<netuix:handleCustomEvent event="customEvent" eventLabel="customEvent" filterable="true" description="custom event handler">
<netuix:invokeJavaPortletMethod method="processCustomEvent"/>
</netuix:handleCustomEvent>
</netuix:javaPortlet>
</portal:root>
Then, in your receiving portlet the method "processCustomEvent" would receive the event, such as:
public void processCustomEvent(ActionRequest actionRequest, ActionResponse actionResponse, Event event)
The event payload can be any Serializable object you want, but for forward-compatibility with JSR286 it would be ideal if it had a valid JAXB binding.
Kevin

How to trigger approval request for resources after assigning role

Hi,
We have a use case where we need to assign resources to user via assigning roles.
In order to achive this use case
1. we have created a role and assigned the access policy to it which contain the resources to be provisioned once the role is assigned to the user.
2. Created a SOA composite having manager approval and assigned this composite to a approval policy of type 'Assign Role'.
3. I am already having the approval policy for the resources which are present in roles. The approval policy of resources is of type "Provision Resource".
4. Also the SOA composite for resource apporal is deployed in OIM and assigned to the approval policy.
5. Now when I am raising the request from OIM of type "Assign Role" the approval defined in the SOA composite for Role approval gets triggered. After approving the role request the role is assigned to the user and also the resources defined in the access policy gets provisioned to teh user account.
Now I want to trigger the resource approval process after the role approval instead of directly provisioning the resources. So that once the role is approved the individual Approval Process of resources part of roles should also gets invoked. Based on the approval or rejection of resources approval, the resource gets assigned to the user.
Please let me know how to achieve the above use case.
Thanks in advance

Access policy is saying whoever gets xyz role, will get this abc resource. Now once a user gets xyz role, you are stopping to get abc resource? both are contradictory. Don't go through access policy. User is anyway going to request for roles. Modify your flow and make user request for resource. Have your composite and approval policy attached. User will get resource once it is approved.
regards,
GP

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How do you complete or re-attempt failed provisioning tasks

Hi All,
If a modify operation has been perfomed, and subsequent provisioning tasks failed, is there a way to get IdM to go back and attempt to complete the failed task and remaining tasks.
For example, when the MX_VALIDTO attribute changes we call an event task to determine if MX_DISABLED should be set or not. This task is a generic pass which executes some logic which evaluates other attributes. This step failed because we caused an error to be raised due to an unexpected value in one of those other attributes.
We have now modified the logic in the script and want to 're-provision' the failed task without triggering a new change on the identity.
I know about the uRetryPrivilegeAdd and uRetryPrivilegeRemove internal functions, but it seems as if these only deal with cases where privilege assignment had failed. Is there something similar that will reconcile and clean up failed task heirarchies where it is just attribute / entry modifications rather than privilege assignments.
Regards
Paul

Hi Paul,
Hope all is going well with your project, the two bits of code you need for this are:
Find all the failed privileges for an Identity
var sql = "SELECT MSKEY,aValue,provstatus FROM MXPV_Priv_AddStatus WHERE (MSKEY = " +V_MSKEY +" and (ProvStatus = 1001 or ProvStatus = 1101))";
sqlresult = uSelect(sql);
This will give you a load of pairs of failed MSKEY - identity and aValue - privilege, which you need to split into strings via an array and then into values, and you can then retry using
retry = uRetryPrivilegeAdd(provmskey,provavalue);
I've put the full code on http://sap-idm.blogspot.com/2011/01/retrying-failed-provisioning-tasks-in.html in case you need more information.
Good luck,
Ian Daniel

How to trigger provisioning - after approval task failed but data corrected

Similar Messages

Maybe you are looking for