How to understand "CSV network"

my understanding is like:
suppose you have a 2 node Hyper-v cluster. Normally, the active node in the cluster should have Direct I/O to the VHD file stored in the CSV on a SAN. However, SAN connection may be lost on this node which could prevent the node’s I/O
to the CSV. In this scenario, the active node would try to communicate through the "CSV Network" to the passive node on which the physical connection (say it's iSCSI HBA) to the SAN storage is still good. The network the
active node use in such scenario is called a "CSV netowrk"?
Am i understanding it right?
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Hi,
that's right. You may refer to those posts for details:
http://blogs.msdn.com/b/clustering/archive/2013/12/05/10474312.aspx
http://blogs.technet.com/b/askcore/archive/2010/12/16/troubleshooting-redirected-access-on-a-cluster-shared-volume-csv.aspx
http://OpsMgr.ru/
thank you. your URLs are very helpful, will read for more.
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Similar Messages

How to Make Wirless Network SECURE

I am running my desktop hard line to a comcast modem which runs XP Pro. My Laptop which is running Vista is set up wireless via the WRT54GS Linksys Router.
The wireless network is running great but it is identified as UNSECURED!
After three 30 minute waits last night, 2 disconnects when I was not understanding them ( not a computer whiz but I do ok) and 1 live chat tech that copy and pasted the directions on how to set it up but not how to make it secure and then a quick disconnect .
Can anyone tell me exactly HOW TO MAKE THIS NETWORK SECURED and WHAT computer shall I use to perform this?
Thank you for any help you can give me,
SWAT
JohnDoe sorry for violating any rules.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 08-27-2007 11:04 AM
Message Edited by SWAT on 08-27-2007 11:13 AM

SWAT wrote:
Sbatch...you click on the pull down window to the settings.....I click on WPA then I input the code I wanted (only room for 1 code) then scroll all the way down to click on save settings.
That method does not secure my laptop wireless settings?
**No, that secures your router's wireless settings.
or
Is this the only method to secure the network?
With some investigation I can find have found the following:
If I right click on my Network Icon in my tool bar and then click Connect to Network and then right click on the Network and right click Properties I get a box with the following:
Tab for connection and a tab for security with pull down bars which can be changed...
1) Security Types -No Authentication (open), shared, wpa2 personal, wpa personal, wpa2 enterprise, wpa enterprise and 802.1x
2) Encryption Types -WEP
Current settings on my laptop Linksys wireless network security is
Security Type- OPEN
Encryption- NONE
sBatch when I perform the WPA on my desktop my laptop must be off or not on the network correct?
Doesn't matter, once you change the security settings onthe router, you will be prompted for the settings to reconnect to it.
Has anyone found the LinkSys hyperlink for setting the WRT54GS router as SECURED?
Define "secured". Wired, only physical connection have access.
Wireless, once you add WPA or WEP (WPA is better) it's secured.
Sincerely,
SWAT
Does that help?

How to Identify the Network Topology being used for a running ForeFront TMG Stand Alone array?

Hello Experts,
My client has decided to move their datacenter from one location to other including the ForeFront TMG servers which are being used as Reverse Proxy and TMG Gateway in DMZ environment.
I need to know the network topology used for this configuration so that I could chose the same topology when creating new TMG environment at new datacenter. Here are some details :
1. There are 2 TMG servers configured in a DMZ Workgroup in Stand Alone array.
2. Both servers have 3 NIC attached to them. (one has all public IPs configured, another one has internal IP address and the third one has Management IP which is used to connect the server via RDP).
3. There are more than 50 websites published via this standalone array.
I am very new to Forefront TMG technology and need to know the Topology used to create such environment.
Thanks
Lalit

Hi,
According to your description, you can use the 3-leg perimeter network template and choose which network adapter connects to the LAN, which network adapter connects to the external network and which network adapter connects to the DMZ.
Did you set up TCP/IP settings for the three NICs? If not, please refer to the link below:
Recommended Network Adapter Configuration for Forefront TMG Enterprise Edition Servers
More information:
Microsoft Forefront TMG – How to use TMG network templates (Note:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie

Dedicated CSV Network and Single iSCSI 10 GB Link?

I just need some information on including a CSV dedicated Network or if that is over kill? Designing a 2012 R2 environment with 4 blades for host. On the back end we have two modules for redundancies that give us 8 usable NICs. That are
then routed through two redundant switches. All 10 GB to the switch, etc.....
Management Network
VM Network (Client Data)
CSV Network
Live Migration Network
Cluster Heartbeat Network
iSCSI (SAN)
Backup Network
Question for all my Hyper-V peers is this, I understand the reasoning behind the CSV Network. Allowing data to move between the four host if one of the SAN networks goes down. However, is it really needed? If we use it I plan to just use
the Live Migration Network as the CSV Network.
So, what do you think? Should I keep the CSV Network and just combine it with the Live Migration Network and then make sure that network card is set to the lowest priority?
One more question. Our current design gives us a 10 GB iSCSI connection. Again on the back plane it is redundant and connected to redundant switches. The only problem I see I will have is since the Host sees only one network that I will get
warnings that I don't have redundancy? So I should need to worry about MPIO and just ignore the warnings?
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

This looks good. The published
best practices guide recommends min. 5 networks, so you're good.
About iSCSI and MPIO, you will need MPIO if there's more than 1 path between the initiator (your server using the iSCSI LUN) and the target (the SAN that's unmasking the LUN). So, if you have 1 iSCSI NIC on the Hyper-V host (initiator) and 1 iSCSI NIC on
the SAN, there's no need for MPIO, since there's 1 path. If you have 2 iSCSI NICs on the host, and 2 iSCSI NICs on the SAN, you have 4 paths between that particular initiator and target. Depending on the SAN vendor you may have to manually spell out the 4
path in MPIO config (simply pointing out the IPv4 address of each of the 4 NICs. You do not NIC team or port channel iSCSI NICs. Installing MPIO will require a reboot. Default MPIO algorithm is round robin, can be changed, but you rarely need to do so.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

How export to csv work in safari browser? In my application export to csv open like a raw data in new tab. But other browsers working great!. Need to open in a csv file or save it as a csv file.

How export to csv work in safari browser?
In my application export to csv open like a raw data in new tab.
But other browsers working great!.
Need to open in a csv file or save it as a csv file.
Please suggest me. Thank you in advance!.

Hi Adrian,
Why don't you try any another software for opening CSV files then Notepad ? According to my experience, you can use these softwares to open an CSV files and they are:-
Microsoft Excel
Open Office Calc
Google Docs
Also there is an additional tool available known as CSV viewer. You may try this, download it from here http://www.csvviewer.com/
I've never used Notepad for opening CSV files, because sometimes it contains some symbols which are not not at all compatibile with Notepad.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to search a network/external hard drive in finder?

I use my Macbook at work where I am required to save all files I work on to a network hard drive on our server. I also have to be able to find and access files from the network drive for customers. In Snow Leapord I had the ability to type in the search bar in finder and it would search the entire network drive and find what I was looking for very quickly. Lots of people at work access the network drive, and every one of them has a different sense of organization. The ability to search is an absolute must in order to find anything. After upgrading to Lion, I discovered that the ability to search a networked or external hard drive has been removed. Lion only allows me to search my local hard drive in my Macbook. Does anyone know how to search a network hard drive in Lion? If not I am going to have to eat the 30 bucks and downgrade back to Snow Leopard. I have scoured through every little preference and option and have found nothing that even sounds remotely like it has anything to do with the search feature. Anyone please help, if not I am going to have to break out the time machine backups and remove this broken os from my computer.

system preferences, spotlight, privacy, add the network or external hard drive and then remove it from the privacy list. it should start to reindex this drive. You'll experience some slowness while this is happening and depending on how big your network is, it might take a really long time. But after that, you should be able to search in them as well. You can also organize what types of files show first so you can navigate to them easier.
hope this helps

How to upload .CSV file from Application Server

Hi Experts,
    How to upload .CSV file separated by ',' from Application server to an internal table.
Invoice No,Cust No,Item Type,Invoice Date,days,Discount Amount,Gross Amount,Sales Amount,Customer Order No.,Group,Pay Terms
546162,3233,1,9/4/2007,11,26.79,5358.75,5358.75,11264,HRS,11
546163,2645,1,9/4/2007,11,3.07,305.25,305.25,10781,C,11
Actually I read some already answered posts. But still I have some doubts.
Can anybody please send me the code.
Thanks in Advance.

Hi Priya,
Check this code
Yhe logic used here is as follows,
Get all the data into an internal table in the simple format ie: a row with one field contains an entire line
After getting the data, we split each line of the table on every occurrence of the delimiter (comma in your case)
Here, I have named the fields as field01, field02 etc, you could use your own names according to your requirement
parameters: p_file(512).
DATA : BEGIN OF ITAB OCCURS 0,
          COL1(1024) TYPE C,
         END OF ITAB,
         WA_ITAB LIKE LINE OF ITAB.
DATA: BEGIN OF ITAB_2 OCCURS 0,
    FIELD01(256),
    FIELD02(256),
    FIELD03(256),
    FIELD04(256),
    FIELD05(256),
    FIELD06(256),
    FIELD07(256),
    FIELD08(256),
    FIELD09(256),
    FIELD10(256),
    FIELD11(256),
    FIELD12(256),
    FIELD13(256),
    FIELD14(256),
    FIELD15(256),
    FIELD16(256),
   END OF ITAB_2.
DATA: WA_2 LIKE LINE OF ITAB_2.
    OPEN DATASET p_FILE FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
    IF SY-SUBRC = 8.
      WRITE:/ 'File' , p_FILE , 'cannot be opened'.
      LV_LEAVEPGM = 'X'.
      EXIT.
    ENDIF.
    WHILE SY-SUBRC <> 4.
      READ DATASET p_FILE INTO WA_ITAB.
      APPEND WA_ITAB TO ITAB.
    ENDWHILE.
    CLOSE DATASET p_FILE.
LOOP AT ITAB INTO WA_ITAB.
    SPLIT WA_ITAB-COL1 AT ','    " where comma is ur demiliter
     INTO WA_2-FIELD01 WA_2-FIELD02 WA_2-FIELD03 WA_2-FIELD04
     WA_2-FIELD05 WA_2-FIELD06 WA_2-FIELD07 WA_2-FIELD08 WA_2-FIELD09
     WA_2-FIELD10 WA_2-FIELD11 WA_2-FIELD12 WA_2-FIELD13 WA_2-FIELD14
     WA_2-FIELD15 WA_2-FIELD16.
    APPEND WA_2 TO ITAB_2.
    CLEAR WA_2.
ENDLOOP.
Message was edited by:
        Kris Donald

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to Understand AWR Report

Hi
How to understand AWR report?

Hi,
first of all, you need to understand things that this report is about -- like wait events, DB time, CPU time, etc. If you are familiar with these things, the rest is easy.
There are also some articles about reading AWR reports in my blog, including some examples: http://savvinov.com/awr/
Best regards,
Nikolay

How to understand STATPACKS report ?

Hi,
How to understand STATPACKS report ? Some documents or link ?
Thank you.

http://www.akadia.com/services/ora_statspack_survival_guide.html
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/statspac.htm
http://jonathanlewis.wordpress.com/2008/02/18/analysing-statspack/
and many..many more....!!!!
Grrod reading...
Sim

How to get the network details in flex4.5 web application

How to get the network details in flex 4.5 web application
similar to the nativeinterface in air application

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

How forget a wifi network on a MacBook Pro with Retina Display?

I entered the wrong password for a wifi network at my uncle's house and I can't figure out how to re-enter the password. Or how to forget the network so I am printed to re-enter the password.

The MacBook keeps a list of all wireless networks you connected. Go to System Preferences > Network > Advanced, and remove this wireless network from "Preferred networks". Then, try to connect again to this network. Anyway, your computer should ask you for the password if it wasn't typed properly

How to change mobile network from At&t to verizon

how to change mobile network from At&t to verizon

What exactly are you trying to do?
You can't "change the mobile network"?
What device model number do you have?
Has it worked previously?

How to reset the network IP address from terminal/command line in Mac OSX?

Do anyone knows how to set the network IP address from terminal/command line in Mac OS X?

how about a GUI, ever heard of a GUI? it's this really neat thing, where you don't have to worry about remembering long strings of text to do something. Mac OS X actually has a rather decent one (that was sarcasm by the way, Mac is the best) you could have it done in like 30 sec, if you use the network pane of system preferences.

How to understand the way OBIEE implements outer joins?

Hello guys
I have a few scenarios where I have to implement outer joins and inner joins between dimensions and facts..
There are 2 ways as far as I know that allows me to implement outer joins in BMM layer.
1, Join the Logical dim table A to Logical Fact table B using outer join. The modeling will look like the below:
A Dim ---outer------B fact -----------inner----C Dim
By this design, the query that selects columns from all 3 tables will look at this:
select columns from ((B fact inner joins C on key1 = key2) left outer joins on A dim) on key3=key4)..
2, Join logical dim table A to fact table B inside the LTS of fact B by mapping the LTS B to dim A using outer join. then join fact B to C:
B fact (mapped to fact B outer join Dim A) ------------inner -------C dim
By this design, the query that selects columns from all 3 tables will look at this instead:
select columns from C, B left outer join A on key1=key2 where key3=key4
Comparing these 2 queries, the first one seems to do inner joins first and then outer join the result set to Dim A, the second query seems to outer join Dim A first and the result set inner joins to Dim C..
I ran the same report using these 2 different designs, and the data comes out very different. The report of the first query is much smaller than the report of the second query...
Can anyone help me understand how OBIEE understands outer joins? The second query is so far giving the right result, however, I can't get rid of the outer join in the query even if not selecting columns from Dim A, which is impacting the performance of other reports without Dim A.
Your inputs will be greatly appreciated
Thanks
Edited by: user7276913 on Apr 20, 2010 9:31 AM
Edited by: user7276913 on Apr 20, 2010 9:31 AM

Xcode is the IDE.
Objective-C is the language typically used.
There's lots of getting started stuff at https://developer.apple.com

How to understand "CSV network"

Similar Messages

Maybe you are looking for