How to unhide the Outbox in Mail 6.2

Anyone know how to do this? The method used for Mail 5.1 does not work. I have an email that won't send - apparently due to incorrect SMTP settings for a new email account I have - and it is "stuck" in the outbox, yet I cannot see my outbox at all in Mail 6.2. Why the **** Apple would hide this is beyond any logic, but I need to see this outbox to be able to test/resend the email. Any help would be greatly appreciated.

In previous versions of Mail, the Outbox would appear if something is in it. But not in this version. I created a new email account for a new domain I got, sent a test email and it failed. I got an error message saying:
"Cannot Send Mail Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system adminastrator."
I have since fixed the SMTP problem and mail is sending out correctly, except for the first test email which is stuck and keeps trying to send out every few minutes and [still] fails with that error message. It is NOT in the Drafts folder. From previouos experience, I'm pretty sure it must be in the Outbox; if I could only get into the Outbox and delete it, the issue would be resolved!

Similar Messages

  • How to unhide the Outbox in Mail 5.1

    I tried to send an attachment that is too large with a mail message.  It tries and tries but will not send.
    The turning gear shows up next the Sent folder but there is no Outbox folder visible.  How can I diplay
    the Outbox so I can delete the screwed message that is hung in the outbound queue?
    I sure wish Mail had an Outbox

    Turn off your WiFi, and send an email.  As it can't be sent, the Outbox will become visible and you can then add it to your Favorites by dragging the Outbox Folder to the favorite bar:

  • HT1529 how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

    how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

    The reason it will not be in the sent folder is, it failed to send.
    If it failed to send, then you will see the Outbox icon. 'Pending' would be a more descriptive name.
    When it eventually sends, the Outbox will not show in the Mail app interface.
    Until it is sent it will stay stuck in the Outbox.
    If it refuses to send, you can manually delete it in Finder, at the location ~/Library/Mail/Mailboxes/Outbox.mbox
    Close Mail first, before you search for that email using the Finder.
    Mail version 4.6. Mac OS version 10.6.8

  • How To Unhide the Library Folder in Mac OS X Lion

    How To Unhide the Library Folder in Mac OS X Lion

    Ken30 wrote:
    How do you unhide in a Time Machine File?
    What are you trying to do?
    If in the Time Machine interface you wish to restore something in your Library, type cmd-shift-g, then type ~/Library into the path field and hit Go.
    If you are browsing the Time Machine backup using the Finder, I hope you never wanted to use that backup again as you are more than likely going to corrupt it to the point of it not working any longer. If that is the case, you can do the same thing with the Go to Folder command above, just use the full path to where your backup is mounted. The easy way to find the path would be to open another Finder window and navigate to your home folder on the backup. Drag that home folder to an empty Go to Folder path field and it will fill in the full path, then add /Library on the end.

  • HT6154 how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

    how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

    Download what files?
    What is the actual problem that is occurring?

  • How to change the number of mails displayed

    I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

    Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

  • How to get to outbox in mail? (unsent yahoo mail)

    I have an ipod touch and use the wi-fi and mail program to access my yahoo mail.
    About a month ago, it stopped sending emails. 
    Now I have several e-mails that just sit as unsent.
    I cannot find the outbox.
    Even worse I "copied" to the clipboard an e-mail I wrote today hoping to save it.
    But when I paste it pastes something that I copied last week. 
    Any help appreciated. 
    How do I send/delete or at least access these messages?
    Thanks!
    P.S. Already tried reset, power on/off, reconfigure mail, deleted account, restored account...all this did was apparently erase the messages completely.
    Message was edited by: Rerednaw

    try logging in on the computer and if that doesn't work all i can think of to do is to set up a new email account. Once when i got my new phone i set up a gmail account and for my alternate email i stupidly put in my hotmail and this disabled the account so maybe something like that has happened? good luck anywaya!:)

  • How to use the Eudora e-mail program with new ports

    For those of you that still use Eudora as your mail program. Here is how I made the required changes for the new port settings
    1) Open Eudora and from the "Tools" drop down menu select "Personalities"
    2) In the "Personalities" pane - right click the account you want to change and select "Properties"
    3) In the "Generic Properties" pane change the following
       a) Change the SMTP server to    smtp.verizon.net      and leave the "Authentication Allowed" box checked
       b) In the"Secure Sockets When Sending" selection box pick "Required,Alternate Port" . This both turns on SSL
           and makes the port  number 465 as required by Verizon
    4) Click the "Incoming Mail" tab at the top and then make the following changes
       a) Change the POP server to     pop.verizon.net
       b) In the"Secure Sockets When Sending"  selection box pick "Required,Alternate Port" . This both turns on SSL
            and makes this port  number 995 as required by Verizon
    Thats it . It should work for you now. You need to do this for each "Personality" (Sub account) you have

    Eudora users may also need to make changes to Eudora's Options (Tools > Options) "Getting Started", "Checking Mail" and "Sending Mail" in addition to the changes for each Eudora Personality. I outlined those changes in the "Eudora & server changes" thread--note there is a typo ("smpt" rather than "smtp") in the first post (couldn't edit that post to make the correction) in the thread so make sure to check the entire thread as a later post shows the correct entry.
    I had problems with Eudora sending mail (I didn't have problem with incoming mail because I don't use Verizon's servers for that) until I made changes to both Personality accounts and to the Option/suboptions noted above.
    Did you get things to work properly without having to make changes in Options?

  • How to unhide the column in Alv table

    Hi Experts,
        Initially i have created webdynpro Alv table with 8 columns ,later i have added one more attribute/column to the node to display extra column
    but in the output ,alv table not displaying the 9th column,Instead the column is getting hidden which i came to know clicking on settings in alv table output.If i make changes in Alv table settings it getting displaying,can anyone tell me how to unhide this field.
    Regards
    Sandesh

    Hi Sandesh,
         It is possible that the user you are loggin in with, might have a layout saved.
    You can try logging in with different user and see if its still hidden.
    The explicit code to hide and unhide a column :
    lo_alv_column->set_visible( if_wdl_core=>visibility_none ).
    may be  you can use the above code and make column visibility true(cahnge parameter).
    Regards,
    Tashi

  • Nokia 6700: how to read the full E-mail??

    Hi there,
    When I am browsing the internet with my Nokia 6700 I can use the navigation key to scroll up, down, left and right. But when I am reading my E-mails. I can only scroll up or down, so I can not read the text which is on the right side of the E-mail... I have tried to change the settings (640 x 480 etc.), but the E-mail appearance did not change, nor did the size of the letters.
    Does anyone know how I can change this?? It is kind of anoying that I am not able to read the full E-mail...
    Thanx!

    As you guess, it is stored in the PSD, but only with the Maximise Compatibility switch. Without that switch, a dummy image is stored which has the text "This layered Photoshop file was not saved with a composite image.", in English, German, Japanese and French.
    My program
    psdparse extracts each layer in an 8-bit file as a PNG, and the merged image for both 8- and 16-bit files. That link is to a Subversion repository containing source code.

  • How to own the same e-mail-address for different Apple-IDs

    Hello
    I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
    Thanks for supporting me
    I already raised this question in the iCloud forum, but till now nobody answered - may be the wrong sub-forum

    Many thanks for the answer - that's what I suspected. Anyway...
    The problem I have now is, that my Apple-ID I used already for some years in order to buy apps is in the "old" format (e.g. duggy832), that means not in the form of an eMail-address. iCloud accept only Apple-IDs in the “new” format meaning in the form like an eMail-address (e.g. [email protected]).
    So it needs to modify the old Apple-ID from duggy832 to [email protected] or to “transfer” – if possible – my shopping from Apple-ID duggy832 to [email protected]
    Which way is possible, which is safe/secure, which is recommended?
    Thanks in advance

  • How to change the view of Mail to be similar as Outlook?

    In the past, I get used to view my email content on right hand side and the email list in the left hand side. In such way, it can allow me to scan the email content line by line effectively.
    Now I can only see Mail arranging the email list at the top and email content at the bottom. Is there any special way to rearrange the outlook of Mail?

    there was a 3rd party plugin to make this possible in leopard Mail called Letterbox
    http://harnly.net/software/letterbox/
    but I don't think it has been updated for snow leopard yet.
    Message was edited by: V.K.
    just checked the link and they've got a snow leopard beta version already.

  • How to stop the information broadcasting mail if the output of the query is

    Hi everyone, We have a requirement to not to send the information broadcasting mail in case if the query output is blank (ie no applicable data). However as per the schedule the mail should go in case if there is applicable data. In other words, users are not interested in opening the broadcasted mail to see if there is any applicable data or not. Inputs will be certainly rewarded
    Kathir

    Hello,
    Create an exception or condition for this report then use the "broadcast according to exceptions" option.
    Regards,
    Michael

  • How to change the primary outgoing mail server in iphone

    I am trying to change the primary outgoing mail server from Yahoo to another mail which is my internet provider. I do not know the steps to complete this in my iphone thanks

    If you have more than one email account on your phone, you can change the default account under Settings>Mail, Contacts, Calendar>Default Account. Note that this setting does not appear unless you have more than one account on your phone. So, you'll need to add the email account from your ISP under Settings>Mail, Contacts, Calendars>Add New Account if you have not already done so.

  • How to get the vendor's mail?

    hello,
    i have one requirement,
    i need what are the settings are required for the configuration  and tell me how to do?
    when i raised the PO, the po goes to vendor, vendor has accepts the po or rejects the po.
    suppose the vendor accept the PO, or rejects the PO, the byer should get the mail how to do,
    what are the setting are required for this.
    My prerequesites
    1)in material master  --purchasing view click the Acknowlegge field.
    2) in Inforecord click the acknowledge field.
    3) while creating the PO select the acknowledge field in item detail tab(confirmation)
    4)email Id taken from Pur grp
    tell me what are the settings are required to get the mail from vendor.
    Regards
    sapman

    yes,,, vendor may not use SAP.....But he has seen the PO in other media(portal),,,
    suppose he rejects the PO,,, or accepts the po,,, how the buyer get the mail?
    plz explain me

Maybe you are looking for