How to Unload the form when the user presses Escape Key

Hi all
I have tried several triggers for unloading the form when the user presses escape key,but none of them worked. Could any body give the trigger name and the code that unloads or closes the form when the user presses escape key.

Hello,
Change the EXIT entry of you ressource file:
27 : 0 : "F4" : 32 : "Exit"Francois

Similar Messages

How to execute the data in the form when the data is already avaliable

Hi,
I am working with forms 6i. I have a problem while executing the data in the form
Actually, the data is already present in the form. But when i run the form, the data is not displayed.
can anyone please help me how to execute the data. below is the code
Set_Alert_Property(alert_id,ALERT_MESSAGE_TEXT,'Do you want to refresh new Data for that Year and Field ? (it will take a time).') ;
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON1, LABEL, 'Yes');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON2, LABEL, 'No');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON3, LABEL, 'Cancel');
               button_number :=Show_Alert(alert_id) ;
               synchronize;
               if button_number != ALERT_BUTTON3 then
                    if button_number = ALERT_BUTTON1 then
                         :param.field := :control.f_cd;
                         :param.year := :control.year;
                         build_tables;
                         fields;
-- areas(:param.field);
                         PUT_PARAM;
                         COMMIT_FORM;
                    go_block('wet_criterias');
                    end if;
                    if button_number = ALERT_BUTTON2 then
                         :exhibits.field_display := :control.f_name || ' - Exhibits';
                         go_block('RESERVOIR');
                         execute_query;
                    end if;
               end if;
          end if;
else
     message('Fields must be entered...');
end if;
else
message('Fields must be entered...');
end if;

It's hard to know what logic you are trying to implement.
However, by looking at your code, it seems that if the user select 'Yes' to the question "Do you want to refresh", nothing is done except the go_block('wet_criterias'). Should there be an 'Execute_Query' ?
No idea...

Sortingtable clears the forms when the column is clicked for the first time

Hi All,
I have text fields which will take the conditions for search and result will be displayed in the sorting table of the same form,
When the search is done for the first time the result is shown in the sortingTable, but when we click any of the column to get it sorted it clears out the whole screen and shows only the search text fields.But when we do a search again in the same form there after the sort works.it does not clear out.
This happens for the first search after the form is loaded for the first time from the workflow
appreciate any solution or suggestion
Thanks
Pratheep

Thanks for your reply, it did not work even after setting the sortEnable,
The issue i find is when the any column is clixked for sorting for the first time all the form variables even if it is under Expansion is lost, but when we do the search again (even with different criteria) the same page and hit the sort column again the form variables are retained

How to resubmit the form when back button pressed

Hi,
In my application, iam implementing searching,
when i submitting the form, i got some records and i navigated all the results through next and previous buttons.
Problem occurs when i clicked on back button, it is showing "page expires and asking for resubmit the data".
How can i show the previous page, when user clicked on back button.
Iam using struts 1.0 and ibatis
Please help me out.
Thanks in advance,
Mohan

Hi mohan,
try to store your search indices in a vector and put that vector in the session scope. at page first loading you get the first index from your vector and pass it in the request scope in your action class, due to the page you have to find a way to understand the passed index in request scope and translate it to the searched word location.really I have not a code sample, but it is just an idea.
feel free to ask me.
Thanks.
Ahmad Elsafty

How to move cursor to a particular field in a form when the form opens

Hi All,
Using Forms Personalization how to move the cursor to a particular field in a form when the form opens.We are using Oracle Applications 11.5.10.2
Please let me know as soon as possible.
Thanks,
--John.

Hi Satya,
Try the following
Open the forms personalization window
Seq: 10
description : Move cursor
Level : Function
On Condition Tab-
Trigger Event : when-new-item-instance
Trigger Object:- (The field on which the cursor is appearing now when you open the form ) for eg : If I am working on a vendor Master form in that case it would be -VNDR.VENDOR_NAME_MIR.
Processing Mode : Both
Context:
whatever context you want to do it respoansibility level or user level.
On the Actions Tab
Seq: 1
Type: Bulletin
Bulletin type : GO_ITEM
Argument : The field to which you want to navigate to. (In my case I want to navigate to Alternate name on the Vendor master form so it would be VNDR.VENDOR_NAME_ALT_MIR).
see if it works for you.
cheers,
Ankur

How to clear all data when the form loading at the first time

hi
I am using JDevloper 10g and I have adfForm page, I want to clear all data when I load the page for the first time.
When I did it using RefreshCondition on the pageDef in the executables like(
<executables>
<iterator id="FinCompaniesInformaton1ViewIterator" RangeSize="10"
Binds="FinCompaniesInformaton1View"
DataControl="AppModuleDataControl" *RefreshCondition="#{adfFacesContext.postback==true}"* />
</executables>
the form didn't bring any data but the problem is the field in the form at the run time changed to read only. So how to make it inputText and clear the data inside it at the run time
best regards
Tarek Al Soudani

thank you for your help,my spec is I have ADF Form and I have creat and Edit CommandButton I made it befor also Commite to save.
so when I run the form the Field should be disabled and there are no data inside it,and when I chose the creat button the fields should be enabled and I have to insert data inside it then I save.
So I have FinCompaniesInformatonView as view object based on entity object name FinCompaniesInformaton and applicationMoudul.
I tolde you befor that I made refreshcondition to solve the data clearence problem but the field changed to read only so please if you now any way to leave the fields as inputText whitout make the form as creation form
beast regards

How do I ensure that when a user clicks a box on the check box widget, the check box remains?

Hi, I am using Captivate version 7. I am using a Checkbox widget on a slide. When the user checks the check box and then closes out of the course, how do I ensure that when the user goes back into the course, the check box remains? We're posting on an LMS. Thanks!

Every widget, variable is reset when a course is restarted. Moreover you cannot control what is checked in the Checkbox widget by another action than the user click, even though you can change the value of the associated variable. I think you'll have to look for another solution.

How to find the date when the users has been created in Hyperion Essbase

Please let me know, if there is any option or way to find the date when the users has been created in Hyperion.
Essbase - 9.3.1.0.0
Sun Solaris SPARC (32-bit) - 5.8
If not in Hyperion, could you please let me know if it gets stored in the repository. If yes, please let me know the table name in Oracle.

I don't know of a way of getting this information from Shared Services via the standard web UI. However you can see when a native user was created in openLDAP. If your users are all native then you can use an ldap browser to view the CreateTimestamp.
Port: 58089
User DN:CN=911,ou=People,dc=css,dc=hyperion,dc=com
Password: Your shared services admin user password
You should see each new native user under the ou=People and each CN will have a create timestamp.
I can't help if all you users are external or your using the old Essbase native security.
Gee

Make all the forms at a user level or responsibility level to be read only

Hi,
Please suggest me to make all the forms at a user level or responsibility level to be read only. So that when a particular user logs in, he gets all the form in read only mode or at a particular responsibility all the forms are read only so that we can attach this responsibility to the user for the same purpose.
Any ideas will be highly appreciated.

check this blog,
http://www.oracleappshub.com/11i/oracleapps-responsibility-vs-sap-functions/
Re: How to change OM responsibility as read-only in oracle applications 11i
read only responsibility-user

Displaying the current users information instead of the value of the person who completed the form in the first place.

I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minute

I think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

How do I customize the forms to the SharePoint list

I need to customize a form to a SharePoint list that I created in Visual Studio.
After the deploy list, try to customize the EditForm.aspx, NewForm and forms, however when publishing the form of a message that basically says catastrophic error is displayed:
This form is not a standard SharePoint.
How do I customize the forms to the list created?

Hi,
Here is a link which describe how to customize SharePoint list forms using Visual Studio, Please compare it with your code and see if there is any possibility causing the error.
http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms
More important, I’d strongly recommend you using InfoPath Form to custom list form for SharePoint. For your convenience:
http://msdn.microsoft.com/en-us/library/office/aa947697(v=office.15).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Changing the name of the form when attached to an email

Good Day All;
I am wondering if there is a way to change the name of an attachment when the email button is clicked.
Let me explain.
I have designed a form that will be emailed from one are to another and when the email button is clicked the email attachment is named (example) “_150s2140t32f8b0iu.pdf”. Of course this is a meaningless name. I would like to somehow change this to better represent the name of the form.
Thanks for any suggestions
Thanks
Chomp

Hi Chomp,
It sounds like you are clicking the email button when in Preview in LC Designer. When the form is being Previewed it is given a temporary name. If the form is opened in Acrobat directly, does the email button attached the form with the proper/full name?
If you want the form to be given a named based on user's inputted data, then you will need a trusted function (.js file) on every user's computer. See this discussion: http://forums.adobe.com/message/2266799#2266799.
Niall

Problems in Master-Detail forms when the detail contains LOVs

I am having problems with master detail forms when the detail contains and lov.
In my detail form I have a messageLovInput field that returns 2 values (code and description). When the lov window returns both values the messageLovInput disappear from the form.
This problem happens only when I iterate in the master view and I try to add a record in the detail form.
If I add a new record without navigation for the master view there is no problem.

Jode,
which technology are you using, ADF JClient ? If yes, please provide a step by step description of how to setup a testcase to reproduce the problem.
Frank

The Form of the Short User Name

Hello,
I have a quick question about setting up accounts, notably about user names, and specifically about the form of the short user name (the one used for the home folder).
I’m going to have to set up a computer with Snow Leopard for someone who knows even less about this stuff than me, so I’d like to do it properly from the start in order to avoid any problems, either immediately or down the road.
In Leopard (10.5), Apple clearly says that the short user name should contain only lower-case letters (http://support.apple.com/kb/HT1428). For example, if your full name is “Charlie Brown”, or just “Charlie”, then presumably your short user name would be “charliebrown”, or just “charlie”.
However, I’ve read that Snow Leopard now supports short user names with capital letters. So, if your full name is “Charlie”, your short user name, and the name of your home folder, can also be “Charlie” (with a capital “C”). This change is apparently not documented by Apple (as mentioned here:
http://www.tuaw.com/2010/01/02/ssh-and-the-case-sensitive-username-in-snow-leopa rd),
and there is one previous allusion to it on these forums (here: http://discussions.info.apple.com/thread.jspa?messageID=10722806).
The use of short user names with lower case letters seems to have been the rule for a long time. I’ve read that this practice is attributed to some kind of Unix convention, although I’ve no idea if this is true (and I’ve even less of an idea of the reasons why Unix might prefer just the lower case to the regular combination of upper and lower case). Anyway, the thing is that I’ve read of problems being created by using capital letters in the short user name, for example when restoring from Time machine (see the last comment on this page:
http://discussions.apple.com/thread.jspa?threadID=2266359&tstart=225), and so I’m asking myself two questions:
(1) Is the use of capital letters in the short user name definitely supported now by Snow Leopard?
And, more importantly, (2) is there is a “best practice” in this regard? In other words, is the use of lower-case letters in the short user name really some kind of a convention, and is this the advisable way to set up a machine? Or does it not matter at all which case one uses in the name?
As I mentioned, I’d simply like to get things straight from the start in order to avoid future problems, since I know that changing the short user name is not particularly advised.
Thanks to anyone who might be able to shed some light on this detail to help me understand what is going on here.
Best regards,
Stephen

Thank you, Kappy, for your quick and helpful reply to my (admittedly) not very quick question!
It strikes me as odd that Apple would appear to make the use of both lower- and upper-case letters possible in the short user-name, leaving the possibility that upper-case letters might lead to some problems/conflicts down the line. It would be helpful if they'd provide some explanation about this. Anyway, as I said, I'm very far from being an expert in all this, and appreciate that people like yourself on these
forums are willing to provide helpful feedback.
Best regards,
Stephen

How to update a chart when the array is updated

Hi I am using an array to populate a chart in FB3 and having trouble updating the chart when the array is updated.
Chart
         <mx:Label id="archiveTitle" x="10" y="10" text="Current Archive " fontSize="14" fontWeight="bold"/>
         <mx:PieChart id="chart" height="130" width="300" color="0x323232"
            showDataTips="false" dataProvider="{ratingAC}" y="22">
             <mx:series>
                <mx:PieSeries field="Rating"/>
            </mx:series>
        </mx:PieChart>
Array + Vars
         [Bindable]
         public var newsDB:ArrayCollection = mx.core.Application.application.newsDB as ArrayCollection;
         [Bindable]
         private var positive:int = 1;
         [Bindable]
         private var neutral:int = 0;
         [Bindable]
         private var negative:int = 0;
         [Bindable]
         private var ratingAC:ArrayCollection = new ArrayCollection([
         { Rating: 1 }, // no data
         { Rating: positive }, // [0] positive
         { Rating: neutral }, // [1] neutral
         { Rating: negative } // [2] negative
        private function init():void{
               buildChart();
               newsDB.addEventListener(CollectionEvent.COLLECTION_CHANGE, test);
               newsDB.addEventListener(CollectionEvent.COLLECTION_CHANGE, buildChart);
        private function test(e:CollectionEvent):void{
             trace("array changed");
             positive = 20
        private function buildChart(e:CollectionEvent=null):void{
             for(var i:int; i<newsDB.length; i++){
                  if(newsDB[i].rateItem == 0){
                       trace(positive);
                       positive += 1;
                       //ratingAC.setItemAt(positive,0);
                       trace(positive);
                  if(newsDB[i].rateItem == 1){
                       neutral += 1;
                  if(newsDB[i].rateItem == 2){
                       negative += 1;

Sorry, in my app I have an ArrayCollection of items from a news feed that the user has deemed important, and given each item a rating. The For loop will loop through the "newsDB" array and set the var accordingly (positive, negative, neutral). The variables are what is populating the arrayCollection (ratingAC). How would I either a) bind the variables to the ArrayCollection so that it updates when one has changed, or b) update the specific index in the array collection. When debugging, i notice that the variables are updating, but the arrayCollection is not.
Thanks in advance!

How to Unload the form when the user presses Escape Key

Similar Messages

Maybe you are looking for