How to update records in a table based on user selection..

Hi all,
This time the above doubt is totally based on the logic of coding which I tried a lot but didn't get any solution. so atlast I come to sdn site.
please help..
The requirement is like that I have a table with 6 fields (1 primary key and other are nonkeys). If the user inputs some values in the fields on the screen, then a row will be added in the table. Upto this i have done well. but when the user want to change some value in the existing row of the table my program unable to do so. Because I couldn't get any logic to do that as there are 5 nonkey fields, so if any one field is modified then the respective row should be selected first based on the user selection and then it should be updated.
At this point I could not get any idea as it may take a lots of if conditions (I guess) to reach to that particular row.
Please help..
thanks ,
sekhar

Hi Sekhar,
I am afraid, the whole design of your program is wrong, let me explain
Let us say you have two rows(5 non key fields) that the user wants to update and the data in these five non key fields are identical and in your program you are getting a number(which is the key) using a number range object. So you will have two entries in the table for the same data.
And on the update page when the user enters the non key fields, how will the program know(or for that matter any one of us) which record to pick, if you have two identical books and if asked for a book wouldn't you ask which one among these two do you want?
Possible Solution: Identify a possible key maintaining the integrity of the data, that is a combination of the non key fields which will help you identify a unique row and make these fields as key fields in the table.
A more costly solution(if you do not want to change the non key field keys to key fields) would be to, adding a check(using select statement) to see if the non key fields combination already exists in the Z table before inserting a record into the table.
If yes, throw a message to the user and just update the values in the table, else insert the record.
Another solution would be to, use the non key fields to generate a key(using some logic) and using this instead of the number range object.
regards,
Chen

Similar Messages

How to update a bc4j detail table based on master selection

I have a bc4j table with single selection set.
When I retrieve the index of the single selection and set the current row in my view object based on that index my detail view object does not update its record.
Only when I am first populating my master view object does the detail view object update or if I set a small range and change between index ranges.
I thought by changing the current row in the master view object the detail view object listener would handle cause the detail view to update.
Please Help.

This looks like a question better suited for the JDeveloper forum. I'd venture a guess that it's a problem with the setup of your associations.

How to update Records from Internal table to u2018Zu2019 table?

Hi Friends,
How to update Records from Internal table to u2018Zu2019 table.
I have records in Internal table , that records want to update on u2018Zmarau2019 Table.
( my internal table & u2018 Zu2019 table structures are same.)
Thanking you.
Regards,
Subash

Hi,
loop at internal table.
modify <Z- table > from values < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
endloop.
or
UPDATE <Z- table > from table < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
Prabhudas

How to create dynamic ed flash charts based on user selected fields in Orac

Hi all,
Can any of the experts please tellme "how to create dynamic ed flash charts based on user selected fields in Oracle apex".
Thanks
Manish

Hello,
Lots of different ways to do this, I blogged about one way (using a Pipelined function) here -
http://jes.blogs.shellprompt.net/2006/05/25/generic-charting-in-application-express/
Other options include using a PL/SQL function returning the string to use as the dynamic query etc.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

How to update Records of SAP table from .CSV file

Hi,
I have written a code which takes a data from (,) delimited CSV file and adds it into the Internal table.
Now I want to update the all fields in SAP table with the Internal table.
I want to use Update statement.
Update <table Name> SET <field needs to update> WHERE connditon.
I don't want to iterate through thousand on record in sap table to check the where condition.
Could you please tell me how to do it.

Hi. I thing you will not workaround the iterating of the internal table.
You can pre-load all the records into another internal table
check lt_csv[] is not initial. " important, otherwise next select would read all records of the table
select .... into lt_dbitab for all entries in lt_csv where key-fieds = lt_csv-key_fields...
check sy-subrc eq 0 and lt_dbitab[] is not initial.
then do in-memory update of the it_dbitab
loop at it_dbitab assign <fs>.
read table lt_csv assign <fs_csv> with key ... " lt_csv should be sorted table with key, or you should try to use binary search
if sy-subrc eq 0.
...change required lt_dbitab fields: <fs>-comp = <fs_csv>-comp...
endif.
endloop.
ant then you can do mass-update
update dbtab from table lt_dbitab.
From performance view, this solution should be much faster than iterating lt_csv directly and updating every single database record
Br
Bohuslav

Filter one table based on user selection

Hi all ,
I am creating simple employee data application in VC. It consists of roadmap. On first step user searches for employee by giving first name , last name then he searches for employee and all the data related to employee's is fetched out at one shot through BAPI_EMPLOYEE_GETDATA. Now after step one no of employee comes.
When I select one record I want that for the selected rows employee's personal data should be fetched out from another table (which is populated during first BAPI call). so I want to pass the selected key value and filter that table based on passed value to table and filter the table .
Kindly give a solution as to implement filter on a table without making another BAPI call .
Thanks in advance
Abhay

Hi Abhay,
There's a trick to get a 'dynamic' filter (i.e. a filter that filters on a value that can change) out of the normal static filters:
Just click on the output of your data source, then 'configure' and on the '+' - sign in the lower right corner. Add a boolean field called 'condition', for example. Then, you write the condition that filters out the row(s) that you need. In the filter that comes next in the dataflow you just filter on this 'condition' - field being true.
Hope that helps,
Sincerely,
Florian

Querying a table based on a selection criteria

Hi Gurus,
Could you please help me in creating a function module that picks records from the table based on certain selection criteria.For eg, If contract number(a primary field) is an import parameter and I want the Function module to export all the records with contract number starting with 1 or may be ending with 303.How could I query this??
Thanks,
Ashwini

Hello,
Creation of Function Module
Goto TCode SE37
Click on the Menu Goto->Create Function Group
Create Z (ZPTP) function group and Activate Function Group even if the error occurs
Create Function module Namely Z (ZTEST) assign to the function group (ZPTP)
Go to the Import parameters (EBLEN TYPE EKKO-EBELN)
Go to the Tables ( itab type ekpo)
Goto the Source code
tables ekpo.
Select * from ekpo into table itab
where ebeln eq ebeln.
Activate the function module and run the function
regards
suresh nair

How can i update rows in a table based on a match from a select query

Hello
How can i update rows in a table based on a match from a select query fron two other tables with a update using sqlplus ?
Thanks Glenn
table1
attribute1 varchar2 (10)
attribute2 varchar2 (10)
processed varchar2 (10)
table2
attribute1 varchar2 (10)
table3
attribute2 varchar2 (10)
An example:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)

Hi,
Etbin wrote:
Hi, Frank
taking nulls into account, what if some attributes are null ;) then the query should look like
NOT TESTED !
update table1 t1
set processed = 'Y'
where exists(select null
from table2
where lnnvl(attribute1 != t1.attribute1)
and exists(select null
from table3
where lnnvl(attribute2 != t1.attribute2)
and processed != 'Y'Regards
EtbinYes, you could do that. OP specifically requested something else:
wgdoig wrote:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)This WHERE clause won't be TRUE if any of the 4 attribute columns are NULL. It's debatable about what should be done when those columns are NULL.
But there is no argument about what needs to be done when processed is NULL.
OP didn't specifically say that the UPDATEshould or shouldn't be done on rows where processed was already 'Y'. You (quite rightly) introduced a condition that would prevent redo from being generated and triggers from firing unnecessarily; I'm just saying that we have to be careful that the same condition doesn't keep the row from being UPDATEd when it is necessary.

How to change records in standard tables ?

how to change records in standard tables ?

HI,
If you are asking from program..Then you can use BDC or BAPI to update the records in teh standard tables..
OR
use the corresponding tcode to update the record
Thanks
Naren

How to update duplicate row from table

Hi,
how to update duplicate row from table?
First to find duplicate row then update duplicate row with no to that duplicate row in oracle.
can you give me suggestion on it?
Thanks in advance.
your early response is appreciated...

In order to find a duplicate row, see:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1224636375004
(or search this forum, your question has been asked before)
In order to update it, just create and use an Oracle sequence, have it start and increment at a value that doesn't exist in your table.
If that doesn't get you going, post some CREATE TABLE + INSERT INTO statements, and the results you want from them, in other words: a complete testcase.

How to updated matrix into related table?

hi, can anyone help me below coding how to updated matrix into related table?
Thank you.
            For rowNum = 0 To oMatrix.RowCount
                oRecordset.Fields.Item("Code").Value = oMatrix.Columns.Item("DSCode").Cells.Item(rowNum).Specific.Value
                oRecordset.Fields.Item("Name").Value = oMatrix.Columns.Item("DSName").Cells.Item(rowNum).Specific.Value
                oRecordset.Fields.Item("U_RPTC").Value = oMatrix.Columns.Item("DSReport").Cells.Item(rowNum).Specific.Value
                oRecordset.Fields.Item("U_USRC").Value = oMatrix.Columns.Item("DSUser").Cells.Item(rowNum).Specific.Value
                oRecordset.MoveNext()
            Next

For Fast Matrix Loading you can user some thing like this.
        Dim Column As SAPbouiCOM.Column
        Dim Matrix As SAPbouiCOM.Matrix
        Dim Table As SAPbouiCOM.DataTable
        Table = oForm.DataSources.DataTables.Add("Documents")
        Table.Columns.Add("Code", SAPbouiCOM.BoFieldsType.ft_Integer)
        Table.Columns.Add("Name", SAPbouiCOM.BoFieldsType.ft_Integer)
        Table.Columns.Add("U_RPTC", SAPbouiCOM.BoFieldsType.ft_AlphaNumeric, 255)
        Table.Columns.Add("U_USRC", SAPbouiCOM.BoFieldsType.ft_AlphaNumeric, 255)
        Matrix = oForm.Items.Item("MatrixUID").Specific
        Column = Matrix.Columns.Item("Code")
        Column.DataBind.Bind("Documents", "Code")
        Column = Matrix.Columns.Item("Name")
        Column.DataBind.Bind("Documents", "Name")
        Column = Matrix.Columns.Item("U_RPTC")
        Column.DataBind.Bind("Documents", "U_RPTC")
        Column = Matrix.Columns.Item("U_USRC")
        Column.DataBind.Bind("Documents", "U_USRC")
        Table.ExecuteQuery(SQLQuery)
        Matrix.LoadFromDataSource() 'Load The Data to the Matrix
To pull the data form the display back to the Table you can use this
Matrix.FlushToDataSource()

How to make records to the table TRFCQIN

hi all,
anyone can tell me
how to make records to the table TRFCQIN
regards

Hi Wanna,
Write a module pool program to enter record into table TRFCQIN.
Take fields to which u want to make entries in module pool.
Use insert command to append data in table TRFCQIN.
Refer this code :
CASE OK_CODE_101.
WHEN 'SAV1'.
TRFCQIN-QNAME = 'XYZ'.
TRFCQIN-QCOUNT = "Screen field name at which user will enter value
INSERT TRFCQIN.
if sy-subrc <> 0.
message e007.
else.
clear TRFCQIN.
clear ok_code_101.
endif.
endcase.
Reward points if helpful.
Regards,
Heamnt

[MDX] Define date range based on user selection

Hi All,
I'm trying to define date range (of 3 months) using mdx based on user selection.
This is what I'm trying to do:
- If user select 2013, I would like range to be: from
1 Oct 2013 to 31 Dec 2013
- If user select Aug 2013, I would like range to be: from
1 Jun 2013 to 31 Aug 2013
- If user select 15 Sep 2013, I would like range to be : from
15 Jul 2013 to 15 Sep 2013
It is not a problem to get the upper bound of the range like this:
ClosingPeriod(
[Date].[Calendar].[Date],
[Date].[Calendar].CurrentMember
But I'm not able to get the lower bound of the range:
OpeningPeriod(
[Date].[Calendar].[Date],
ParallelPeriod(
[Date].[Calendar].[Month Number],
2,
ClosingPeriod(
[Date].[Calendar].[Date],
[Date].[Calendar].CurrentMember
Error:If user selection is
15 Aug 2013, I get
14 Jun 2013
If user selection is Apr 2013, I get
(null)
And even more strange, if user selection is
2013, I get 28 Oct 2013
Any idea of how to solve this ?
Thanks,
Guillaume

Hello Guillaume,
Can you please check if the following works for you? By the way, the performance will suffer due to all these IIF, the solution is very complex in order to avoid null in ParallelPeriod.
with member measures.high as MemberToStr(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
member measures.low as
MemberToStr(
iif(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
) IS ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
).Parent.LastChild --last date of the month
OpeningPeriod(
   [Date].[Calendar].[Date],
Ancestor(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
), [Date].[Calendar].[Month]).lag(2)
iif([Date].[Calendar].CurrentMember.level is
[Date].[Calendar].[Date]
and
Right(CSTR([Date].[Calendar].CurrentMember.Properties("KEY0")),4)="0429" --take care of 4/29
OpeningPeriod(
   [Date].[Calendar].[Date],
Ancestor(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
), [Date].[Calendar].[Month]).lag(2)
OpeningPeriod(
   [Date].[Calendar].[Date],
   ParallelPeriod(
      [Date].[Calendar].[Month],
      2,
      ClosingPeriod(
         [Date].[Calendar].[Date],
         [Date].[Calendar].CurrentMember
select {measures.low,measures.high } on 0
from [Adventure Works]
where
--[Date].[Calendar].[Date].&[20070815]
--get [Date].[Calendar].[Date].&[20070615]
--[Date].[Calendar].[Date].&[20070530]
--get[Date].[Calendar].[Date].&[20070330]
--[Date].[Calendar].[Date].&[20070429]
--get [Date].[Calendar].[Date].&[20070201]
--[Date].[Calendar].[Calendar Year].&[2007]
--get [Date].[Calendar].[Date].&[20071001]
--[Date].[Calendar].[Month].&[2007]&[4]
--get [Date].[Calendar].[Date].&[20070201]
--[Date].[Calendar].[Month].&[2007]&[5]
--get [Date].[Calendar].[Date].&[20070301]
--[Date].[Calendar].[Date].&[20070228]
--get [Date].[Calendar].[Date].&[20061201]
--[Date].[Calendar].[Date].&[20070831]
--get [Date].[Calendar].[Date].&[20070601]
If this does not work for you, I would suggest opening a ticket with Microsoft Support, with an advisory type of request.
Hope this helps.
Thanks.
Meer Al - MSFT

Output different data based on user select

Hi everyone,
Quick question, I would like to output different report columns based on user select, eg., users would be presented with two choices in a radiobutton list, eg., 1 and 2.
I have query results that contain columns A, B, C, D, E, F, G.
If user selects 1 then the output should be columns A, B, C, D, E.
If user selects 2 then the output should be columns A, B, C, F, G.
I am sure this is possible and easy? If so, what topic should I be reading/searching internet on?
Please advise.
Thanks!

I would say that this is most often something that your user interface should be dealing with (i.e. which columns should be shown).
There is no way to do that in SQL.
In PL/SQL it is a simple situation of creating two cursors and simply deciding which one to open.
<pre>declare
l_cur sys_refcursor;
begin
if :user_selection = 1 then
open l_cur for select A, B, C, D, E from tbl;
else
open l_cur for select A, B, C, F, G from tbl;
end if;
-- use the cursor
close l_cur; -- or return to user interface
end;
/</pre>
Hope this helps.

How to adjust mouse or trackpad parameters for the user selection screen?

This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone Carrion

For the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.

How to update records in a table based on user selection..

Similar Messages

Maybe you are looking for