How to update Search Help template for ITS Service PZ03

Hi all,
There is a requirement to change the search help screens of pz03 Internet Service which is being used with EP 7.0.
I have little experience in ABAP so can anyone let me know how to change it. I was able to reach SEARCHHELPDHTML template. Is there a place I can download the template and update it.
Please reply fast. Points assured.
Regards
Atul

Hi.
If you define an Internet Service, using SICF transaction, it shows all standard and z's search help, so I think it's not an ITS problem. Try to define your search help normally on R/3, an after that define your service with using new transaction.
Best regards.

Similar Messages

How to create Search Help for a field in Table control !!

Hello Friends,
 I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 break gblap0.
 ws_dynpfld-stepl = mprn-current_line.
 LOOP AT i_mprn.
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 MOVE ws_postcode TO i_mprn-post_code.
 MODIFY i_mprn INDEX
 mprn-current_line." transporting MPRN POST_CODE.
 ENDLOOP.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
 gntc LIKE iflot-zzgntc,
 END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'ZZGNTC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select Gas Nomination Type Code'
 value_org = 'S'
 TABLES
 value_tab = lt_gntc
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
 text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
 stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 ws_dyname1 LIKE d020s-prog,
 ws_dynumb1 LIKE d020s-dnum,
 ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-MPRN'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
 text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-POST_CODE'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash.

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

How to Provide search Help for files on Application Server

Hi Guys,
 Can anyone tell me How to Provide search Help for files on Application Server. I have put a file name on selection screen. I want to give search help for files on application server.
Thanks & Regards.
Harish.

Hi Harish,
Use the following code,
tables sxpgcotabe.
data: lt_execprot LIKE btcxpm OCCURS 0 WITH HEADER LINE,
 w_filepath(60) TYPE c, --> length depending on your Directory path.
SELECT SINGLE *
 FROM sxpgcotabe
 WHERE name = 'LIST_DB2DUMP'
 AND opsystem = sy-opsys.
IF sy-subrc <> 0.
 SELECT SINGLE *
 FROM sxpgcotabe
 WHERE name = 'LIST_DB2DUMP'
 AND opsystem = 'UNIX'.
 IF sy-subrc <> 0.
 MESSAGE e000 WITH 'External operating system command '
 'LIST_DB2DUMP not found'.
 ENDIF.
ENDIF.
sxpgcotabe-parameters = p_filepath. --> provide the directory path.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
 EXPORTING
 commandname = sxpgcotabe-name
 additional_parameters = sxpgcotabe-parameters
 operatingsystem = sxpgcotabe-opsystem
 TABLES
 exec_protocol = lt_execprot
 EXCEPTIONS
 no_permission = 1
 command_not_found = 2
 parameters_too_long = 3
 security_risk = 4
 wrong_check_call_interface = 5
 program_start_error = 6
 program_termination_error = 7
 x_error = 8
 parameter_expected = 9
 too_many_parameters = 10
 illegal_command = 11
 wrong_asynchronous_parameters = 12
 cant_enq_tbtco_entry = 13
 jobcount_generation_error = 14
 OTHERS = 15.
IF sy-subrc <> 0.
 MESSAGE e000 WITH text-e01 p_filepath. "Directory failed
ENDIF.
Loop round the directory list, split each line up into a line table
and get the last data for each line, should be the filename
Then build the dirlist.
REFRESH t_dirlist.
LOOP AT lt_execprot.
 REFRESH t_dirline.
 SPLIT lt_execprot-message AT space INTO TABLE t_dirline.
 DESCRIBE TABLE t_dirline LINES w_nolines.
 READ TABLE t_dirline INDEX w_nolines.
 MOVE t_dirline-data TO t_dirlist-filename.
 APPEND t_dirlist.
ENDLOOP.
Here you will get all the files in the directory mentioned in Application server.
For displaying them as a Search help use the FM '/BMC/ZPOPUP_GET_VALUE'
Pass the Internal table to this FM.
Regards,
Paul.

HOW TO CREATE SEARCH HELP FOR A FIELD

HI EXPERTS,
 I NEED TO GET THE SEARCH HELP NAME FOR A FIELD.WHAT SHALL I DO ??MATNR HAS MAT1 AS SERACH HELP NAME BUT VBELN DOES'NT HAVE .IF I NEED TO ASSIGN SERACH HELP FOR A SELECTION SCREEN WHICH WILL GET VBELN AS INPUT WHAT I NEED TO DO ????
THANKS
MANI

Hi,
Please find the following code for your help.
Change the according to your table and field name.
& - SOC FOR F4 HELP ON SELECTION SCREEN 15.05.07 - &
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_UNIQUE.
SELECT UNIQ_RES_NO
 FROM zproject_res INTO CORRESPONDING FIELDS OF TABLE ITAB_HELP
 where flag = 'Z'.
SORT ITAB_HELP BY UNIQ_RES_NO .
DELETE ADJACENT DUPLICATES FROM ITAB_HELP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'UNIQ_RES_NO'
PVALKEY = ' '
 DYNPPROG = 'ZRPSTRESVSLIP'
 DYNPNR = '1000'
 DYNPROFIELD = 'P_UNIQUE'
STEPL = 0
WINDOW_TITLE = ' '
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
 value_tab = itab_help
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
& - EOC FOR F4 HELP ON SELECTION SCREEN 16.05.07 - &
Reward points for helpful answer
Debjani

How to set a customized search results template for all users

Hi.
I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
Thanks in advance.

I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
Here is the modification of the code:
<$if customTemplateId and not (baseTemplateId like customTemplateId)$>
 <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>
 
 <$else$>

 <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>

 <$columnsString=columnsString&",xComment"$>
 
 <$endif$>

Hi how to attach search help to a field

hi all,
how to attach search help to a field.

hi
Attaching a search help to a field
A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
Attach search help to a data element / table or structure field / screen field / check table.
Conventionally search helps are attached to table fields or data elements. We shall see the same.
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
In this case, the search help is only available for this screen.
IF YOU WANT TO ATTCH A SERACH HELP TO THE SCREEN FILED THIS IS THE CODE
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
* IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
* SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
* PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
* FIELD_TAB =
* RETURN_TAB = RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
REWARD IF USEFULL

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

How to update the tables either in its entirety or not at all

We want update more than two tables at one time,for example we code following:
update A set ***
update B set ***
we first update A, but sometimes B can not be updated sucessful,
How to update A&B tables in its entirety? Or, if any one of these tables can not be updated sucessful,two talbes don't update at all.
Thank you very much?

hi,
You want to update or not update at all that means either Update or rollback.
So Put A COMMIT WORK statement after the update starement.
It will either fully update or Automatically Rollback the whole
Processing.
Regards
Sumit Agarwal

Steps for creation of search help exit for a search help

Hi,
I have created a search help. I need to create a search help exit for this search help.
Please let me know how to create a search help exit as well as how to link it to my search help.

1)Copy the FM F4IF_SHLP_EXIT_EXAMPLE to write your own FM. (check the documentation and coding of FM F4IF_SHLP_EXIT_EXAMPLE).
2)write your code depending upon the functionality you want.
3)attach the FM in search help through SE11 in "search help exit" field.
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
For more detailed information please refer to the documentation describing the concept of the search help exit.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
 '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
 $listItems = $list.GetItems($query)
 $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
 foreach($item in $listItems)
 #Cast to SPListItem to avoid ambiguous overload error
 $spItem = [Microsoft.SharePoint.SPListItem]$item;
 Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

How to update Search Help template for ITS Service PZ03

Similar Messages

Maybe you are looking for