How to use a radio button in enabling/disabling a text box in report progra
Hi,
Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.
*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.
Similar Messages
-
How to write a numeric value to a plc register using a radio button
I'm want display a HOA (HAND/OFF/AUTO) on my screen. Lookout is connected to a Allen Bradley PLC. I am trying to write to a "N" register. I want to write a zero to open all (eg) N7:10 bits, writing a one (1) will close a contact N7:10/0 and writing a two (2) will close N7:10/1 etc. How do I do it? Can I use a radio button and if so, how?
ICI,
Just wanted to let you know that you have posted your question in the
MATRIXx part of the forum. There is a specific board for
Lookout. If you repost your message there you will be more likely
to get a good answer.
Carl L
National Instruments -
How to create a radio button on OA Page using Personalization
I am trying to create a radio button on OA Page using Personalization. The item style , I can see is Message Radio Group.
How to create Message Radio Button and bring them under one group.
ThanksYou should use jdev to define a radiogroup and radio buttons under that, wrap that definition inside a stackLayout in jdev, use personalization to add a stackLayout and extend the region which you had created earlier in jdev.
-
How to Create a Radio Buttons using Personlization
Hi friends ,
We have requierment like , Wanted to havev two radio buttons Employee Relative : YES or NO values.
These radio buttons I wanted to add on Oracle Provided page using personlization. But the Values for the radio buttons should be YES and another button is No.
After addin it , we shall have this selected value handled in Custom Controller. How can I the radio Buttons with the above YES/No Values. Any guidelines would be greatly helpful.
Thanks Guys
Regards
RaghuHi,
Using personalization you can create radio button s, the item style as: Message Radio Button
and then extend the controller and use the below code in processrequest of the extended or custom controller:
OAMessageRadioButtonBean appleButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonOne"); //First Radio Button
appleButton.setName("Yes");
appleButton.setValue("Yes");
OAMessageRadioButtonBean orangeButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonTwo"); //Second Radio Button
orangeButton.setName("No");
orangeButton.setValue("No");
May be it will help you.
Regards
Mahesh -
Using the radio button component to go to a frame on a MovieClip
hello,
I am using the radio button component in Flash with a continue button.
When the user clicks their option in the radio button and then clicks continue, I want it to go to a movieClips Specific frame.
Here is the breakdown and the script I have so far is below.
The radio group os named RadioButtonGroup
The instance names for each of the three options are noviceButton,intermediateButton,expertButton
My continue button has an instance name of continueButton
and my movie clip I am trying to target has an instance name of level_mc
here is my code so far:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
gotoAndStop (frameNumber);
the problem starts with my varFrame line-I don't know how to get it to go to the movieClip and gotoAndStop at a specific frame, based on which radio button was clicked and after the continue button is clicked.
Does anyone out there have any ideas?
thanks
babsuse:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
level_mc.gotoAndStop (frameNumber); -
How to create a radio button in dynpro during runtime?
Hi guys!
How can i create radio buttons in dynpro during runtime??
any ideas?
thanks!!Hi Thomas,
I think as of now there is no possibility to create a Radio Button Dynamically during runtime. But of course, there is a work around which I feel you can evaluate.
If your business requirement demands that you need to have a Radiobutton, you can use the subscreen to place the Radiobutton and later based on your need you can call that screen to enable that button to the user and to make it available.
Hope this will help.
Thanks,
Samantak. -
Using a radio button in cfmail / form.
Hello;
This is a silly question, but I can't remember how to program in radio buttons for a cfmailer. I have 3 radio buttons, basically, I just need to know what the users choice was when they checked it off. The following is my radio buttons and what I have for code right now. But I'm not grabbing the proper variable, I also tried dumping a few diffrerent variables to see if I could get it.
<input name="type" type="radio" onClick="setVisibility('sub3', 'inline');setVisibility('sub4','none');setVisibility('sub5','none');" value='male' checked="checked"/>Magnets
<input type="radio" name="type" value='female' onClick="setVisibility('sub3', 'none');setVisibility('sub4','inline');setVisibility('sub5', 'none');"/>Paper Steel
<input type="radio" name="type" value='child' onClick="setVisibility('sub3', 'none');setVisibility('sub4','none');setVisibility('sub5', 'inline');"/> both
on my response page, I tried this:
<cfif form.type EQ "male">
if this was their choice, then this set of rules would apply
</cfif>
and so on for the other two choices. This isn't catching my buttons, what am I doing wrong? do I need to make a paramiter for the radio buttons before I can allow it to function? like this?
<cfparam name="FORM.type" default="">
then I can use my if statement? (that isn't working right now either)
here is what I'm trying to dump:
<cfdump var="#form.type#">
<cfabort>
</cfdump>
How do I do this? Can anyone help me?I suspect that you have a problem in some portion of your code that you have not posted. To help debugging I suggest you create a simple test using two pages: input.cfm and action.cfm. Get the most simple case working then add the javascript, css, and CF code to make your application work.
<!--- contents of input.cfm --->
<html>
<head>
<title>Input</title>
</head>
<body>
<form action="action.cfm" method="POST">
Choose type: <br />
<input name="type" type="radio" value="male" /> Male<br />
<input name="type" type="radio" value="female" /> Female<br />
<input type="submit" />
</form>
</body>
</html>
<!--- content of action.cfm --->
<html>
<head>
<title>Action</title>
</head>
<body>
<cfif form.type eq "male">
Type is male.
<cfelseif form.type eq "female">
Type is female.
</cfif>
Here is a cfdump of the form variables:<br />
<cfdump var="#form#" />
</body>
</html>
Message was edited by: JR "Bob" Dobbs
Added sample for action.cfm -
How to create a radio button that changes colors
I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked? -
How to specify a radio button as disabled in Net-UI
How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find much information
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}" labelStyle="right"
>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done using labelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup>Kar,
The netui:radioButtonOption does not have a disabled attribute. I think your
only option is to use javascript to set disabled to true.
- john
"kar piyush" <[email protected]> wrote in message
news:4087ec3e$[email protected]..
>
How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find muchinformation
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}"labelStyle="right"
>>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done usinglabelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup> -
How to deselect the Radio button from htmlb.table.TableView
Hi Experts,
Could you please help me, how to seselect the Radio button from htmlb.table.TableView?
<hbj:tableView
id="tbvCustomer"
model="mcBean.csModel"
design="ALTERNATING"
headerVisible="TRUE"
footerVisible="TRUE"
navigationMode="BYPAGE"
selectionMode="SINGLESELECT"
fillUpEmptyRows="FALSE"
headerText="Searchresults"
visibleRowCount="10"
onNavigate="CustomerSearchNavigate"
visibleFirstRow="<%=mcBean.getCsVisibleFirstRow() %>">
Problem: After searching and selecting the Customer in the table, then again we are searching for another customer. After that the searched customer is displaying in the Table. By default the table Radio button is selected. Because for first Customer we have selected the Radio button. How we can deselect the FRadio button while searching for another Customer.
Thanks In Advance.
Regards,
Vijay.I think it is <2095>.
In SmartForms, go to your text window.
Use the icon on the top left of the text window to switch to the old editor.
INSERT -> CHARACTERS -> SAP ICONS.
Do a FIND on "radio". It's called ICON_WD_RADIO_BUTTON_EMPTY. -
How to Create a radio button?
How to Create a radio button with the label Maintenance of RSDDTREXHPAFAIL tab".Once the user chooses this then there will two options
Create and Delete.Table has three fields.When user chooses the create button then it should create a new entry and delete should delete an entry. If the entry exist then create should overwrite an entry. There is no update.hi...
the sample code below should help you .....
parameters:Maintenance of RSDDTREXHPAFAIL tab radiobutton group grp1.
this will create the radio button on the screen with the lable required.
now in the user command of the screen ..
PROCESS AFTER INPUT.
MODULE user_command_0100.
MODULE user_command_0100 INPUT.
*assigning the sy-ucomm value to ok_code
ok_code= sy-ucomm.
*clear the sy-ucomm
CLEAR sy-ucomm.
CASE ok_code.
*when user presses CREATE button
WHEN 'PB_CREATE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
here write query to fetch data into the internal table
and then use modify command to modify the database.
endif.
*when user presses CHANGE button
WHEN 'PB_DELETE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
HERE write the delete query.
endif.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
<b>plz reward pts if helpful.</b>
regards
vijay -
How to use a back button in action pages?
Hi all,
I have created a user login page,home page and user profile page.
If the user provide correct username and password in the login page he will be taken to home page.
In the home page he will be having his username and a link to view his profile.
When the user click on the link "My Profile(user profile)" he wil be taken to that page.
In my profile page the user can edit only his firstname,lastname and password .
On the user profile page i have placed a Back Button(using javascript: on onclick event i have used history.back()) to go back to home page after editing his profile.
If the user edit his profile for n-number of times then atlast if he wants to go back to home page-then he wil cilck the back button.
Now the problem occurs like the back button not going to home page and it simply going back with the edited history.
How to use a back button in action pages; without repeating the actions done on the page; how to redirect to the users home page?
I simply used the hyperlink in userprofile page to go to home page but when i click onit it is displaying blank home page.
I'm using hibernate orm mapping; cflogin and cflogout tags.
Any help appreciated,
Chandru Pchandrup wrote:
Hi Dan,
Dan Bracuk wrote:
Use an anchor tag.
I simply used the hyperlink(<a href="home.cfm">Home</a>) in userprofile page to go to home page but when i click onit it is displaying blank home page.
I can see your problem. You may use javascript:history.go(-1), javascript:history.go(-2), ..., to go back one page, two pages, and so on. But how does one go back an arbitrary n pages? The link href="home.cfm" isn't a good solution for the browser. It makes a new call to the server which, as you may have discovered, can overwrite all the changes made at the browser.
You should use the Javascript variable history.length. If you open n links in succession, starting from page0.cfm, then the browser holds the value of history.length as n. So, experiment with something like
<a href="javascript:history.go(-history.length)">Go home</a>
or
<a href="javascript:history.go(-history.length+1)">Go home</a> -
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
How can i get Radio buttons and parameters in a Single Straight Line
Hi Experts,
How can i get Radio buttons and parameters in a Single Straight Line...
Example:
r1 r2 p1 p2.....
Cheers,
Priya
Points granted.Write the following code for the selection screen:
DECLARATION OF PARAMETERS.
SELECTION-SCREEN: BEGIN OF BLOCK select WITH FRAME TITLE text-001,
BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) FOR FIELD p_detail.
PARAMETERS p_detail RADIOBUTTON GROUP r1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 25(10) FOR FIELD p_summry.
PARAMETERS p_summry RADIOBUTTON GROUP r1.
SELECTION-SCREEN: END OF LINE,
END OF BLOCK select.
this will solve your poblem surly. reward the points if you find helpful
Regards,
Siddarth -
Explain How to use Structure mapping button
Hi All
Iam Developing an application "Implementing and Using Exceptions in Guided Procedures"
Can you please explain How to use Structure mapping button,
Plz give me steps in details
Thanks
SrinivasHi
Create a project using 0020 as method.
Max
Maybe you are looking for
-
Can I use 2 Time Capsules on the same network
Can I use 2 Time Capsules on the same network Posted: Jul 23, 2009 1:49 PM Reply Email Here is what I want to do. I currently have a time capsule used for one end of the house. Currently my 2 kids rooms are in an addition that I have run a cable from
-
How do I change the date of pictures in an event?
I have just noticed, the date on pictures in an event are incorrect ( Jan 2099 ).I have tried to change it, but it will not allow me to, any ideas?
-
Youtube not working on ipad!!
So the youtube hasnt been working on my ipad for like a week and this is ******* me off.... The place where video is supposed to be is just black when i click play. I tried while being signed in youtube and while being sign out and there is thes ame
-
I am running Win 8.1 and have Air installed, but it does not show up in Control Panel/Programs and Features. Is there a way to uninstall AIR since I cannot see it in Programs and Features?
-
Is it possible to determine if a program is installed on the PC running the flash?
Hi, I use Flash to develop a movie that runs when a user installs a new version of my companies software, and allows the user to access the user documentation and software installations at the click of a button. I use ActionScript to control the flo