How to use and configure DAQmx software triggering in Labview 7.0

Dear NI support staff,
I want use to software triggers to start and stop acquiring an indefinite amount of analog samples (as opposed to a fixed number of N samples in most of your code examples). I don't know the correct way to configure the DAQmx property nodes and the DAQmx send software trigger VIs. In the property node VI it doesn't seem to have an entry for software trigger. So I think I am not on the right track. Would you please help me out? It would be great if you can show me an example. Thanks a lot!
Regards,
Bennett

Hello Bennett,
The example below demonstrates how to perform an analog software triggered acquisition in NI-DAQmx. The example allows the user to specify the triggering condition and the number of pre-trigger samples to acquire.
Example Code - Triggering
Let me know if you have further questions.
Good luck and have a great day!
Regards,
Koninika
Applications Engineer
National Instruments

Similar Messages

  • How to use and configure web services in sap

    Hi,
    Experts,
    could you please tell me, how to configure web services in sap.
    As one of my client using handheld  software for inventory, where in whatever tansaction happens in the depot  it has to update in sap.through non sap software please help me out with necessary configuration.
    Thanks
    Edited by: Ahmed quadry on Jun 9, 2009 2:25 PM

    Hi Ahmed,
    Kindly find the below link will helps you to create web  service in SAP
    http://wiki.open-esb.java.net/Wiki.jsp?page=BAPIWEBSERVICE
    Also find the below documents will helps you to create web services in SAP
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/06adbf03-0a01-0010-f386-d8e45561a3c4
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3004a2d2-0653-2a10-779c-f5562b3fac39
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bb0764f2-0b01-0010-bd85-c7849b40561e
    Regards
    Venkata Rao .G

  • How to create and configure proxies in ADF mobile using OWSM client agent?

    Hi
    Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
    For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
    I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
    Thanks in advance
    Raj

    Hi Juan
    The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
    Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
    Regards
    Raj

  • How to install and configure OID using 11g R2 installers

    Hi,
    I need to install and configure OID, I am having installers of Oracle Identity and Access Management 11g (11.1.2.1.0).
    Please let me know how to install and configure OID.
    Thanks

    Use the R1 IDM package. R2 is only for IAM.

  • How to install and configure management agents on Tru64 Cluster

    We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
    On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
    db1 (database)
    listener-db1 (listener for db1)
    node-db1 (logical hostname for db1 service)
    Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
    I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

    You the Cluster type of configuration. It is documented in the install guide you have

  • How to add and configure an additional hard drive.

    I will like to know how to install and configure an additional hard drive. I will like to know how to configure the server so the services will start using this additional space. Intel based Xserver. late 2009.
    Erik.

    Your question is a little vague... "services will start using this additional space..."?
    Let's see, where to start.
    You don't say how many drives you currently have in your server. If all three drive bays are used then you'll probably need some kind of external array. There are many to choose from.
    If you have a spare bay (or two) then you can buy a new drive bay (ADM - Apple Drive Module) (several online vendors still sell them), but you can't just put a bare drive into an empty bay since the blank trays lack the electrical connectors to support a drive.
    Once you work out your drive options (internal vs. external, capacity, etc.) you can work out a plan to use them.
    The specifics of that will depend on what services you're using. Are you web serving? file serving? home directory serving? or maybe mail? database? something else.
    In general, once a drive is attached and initialized (via Disk Utility.app) it's up to you to configure the individual server components to use the space. That typically involves changing some kind of configuration parameter (e.g. httpd.conf for apache, /etc/my.cnf for MySQL, or various options in Server.app for other services) to tell them to use the new volume.
    If you want to migrate the entire server to the new drive (e.g. the new drive is larger/faster) then you can clone your existing OS drive to the new drive and just reboot.
    So, you see, there are many ways to do this. Everyone's situation will be a little different.

  • How to install and configure smtp on iis 7 on windows 7

    how to install and configure smtp on iis 7 on windows 7?
    Thanks!

    Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

  • How to install and configure Eclipse???

    Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

    how to install eclipse?
    you don't need to install eclipse just extract it to a specific path...
    install j2se 1.5 then eclipse will automatically detect it...

  • How to integrate and configure SMS API CC&B

    Hi All,
    Can you just guide me how to integrate and configure SMS API in CC&B.as per my knowledge sending email from ccb is possible but i was not able to find how SMS application can be implemented in CC&B.it very vital in my project to send SMS alert from CC&B to end users and also let me know can we customise and configure third party vendor SMS API in CC&B which was developed in various technologies or we have to develop our own SMS API for application
    Thanks,
    Srinivas Varadarajan

    There is no built in application for SMS in CCB you need a third party application.
    One of our partner company has a readymade add on module with complete GUI interface for CCB, this application allows you to define rules and conditions using standard select statements to filter receipent for SMS. This application can work with any service provider all you need is a SMS gateway. If you do not have a SMS gateway the same can be provided in certain countries.

  • How To Install and Configure External Drivers for the JDBC & JMS Adapters

    Hello colleagues,
    Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
    VERSION 7.10.
    BBDD ORACLE - ojdbc14.jar
    Regards.

    Hi ,
    Uisng  Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
    refer this two links,the procedure available how to deploy using JSPM.
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
    Regards,
    Raj

  • How to install and configure Essbase in System i or AS 400

    Hello All,
    I have given task by my employer to install Essbase 11.1.1.3 in AS 400 system. Can someone guide me that what steps and what do i need to finish that task.
    I do know how to install and configure Essbase in Windows but I have never get chance to work on AS 400 systems.
    I hopping for promp feedback.
    Thank you very much in advance.

    You should speak with someone at IBM. See http://www.spss.com/software/deployment/showcase/olap-solution.htm
    Oracle doesn't distribute an Essbase product on AS/400 -- IBM purchased the rights to the source code through an agreement years ago.
    Regards,
    John A. Booth
    http://www.metavero.com

  • How to create and configure JMSConnection Factory programatically?

    Guys,
              How to create and configure JMSConnection Factory programatically and (<b>NOT THRU CONSOLE</b>)?
              There is an option using the JMSHepler to create the Queues.
              Is there an option to create ConnectionFactories using the same or other classes?
              anshuk

    There are no 8.1 "JMSHelper" extensions for creating conection factories (they've been added for 9.0). Instead, you can use a variety of more generic methods.
              You can create configuration scripts using WLST or wlconfig or wlshell, or make direct calls from java into WebLogic's public JMX mbean APIs (all config tools, including the console, call into these APIs).
              For a JMX example, see the implementation of the "JMSML" utility on dev2dev.bea.com. For WLST examples search for "+WLST +JMS".
              Tom

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

    Hello,
    We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
    Can anyone please suggest me how to install and configure OSB.
    Regards,
    Anil

    Hi
    Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
    For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
    Regards,
    Mitja

  • How to use AND,OR,NOT condition in Pattern Matching in java

    how to use AND,OR,NOT condition in Pattern Matching in java
    Please anyone give example..

    Stop asking these stupid vague questions and do some of your own research.
    Start here:
    http://www.regular-expressions.info/
    http://java.sun.com/j2se/1.5.0/docs/api/java/util/regex/Pattern.html

Maybe you are looking for

  • How to capture changed data at ALV screen

    Hi ALV Experts, I am using Following method for ALV display :-   CALL METHOD g_alv_grid_0200->set_table_for_first_display     EXPORTING       i_bypassing_buffer            = 'X'       is_layout                          =       it_toolbar_excluding   

  • Error while reversing data from SQL Server to ODI

    hi, I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022. And now, I am getting the below error while reversing the data from SQL Server database. 0 : 08001

  • Forwarding based on URL

    Hi, I'm trying to configure a CSS to act the following way: - initial URL https://test.toto.com needs to reach http://1.1.1.1:8083/test - initial URL https://prod.toto.com needs to reach http://1.1.1.1:8083/prod Also can those two initial URL be mapp

  • What is the benefit of using managed paths?

    Why not just put everything under /sites? What is the value in organizing sites under managed paths - aprt from it looking nice what other benefits does it bring? For one thing organizations change their structures sometimes drastically and surely ad

  • Sun Certified Business Component Developer (SCBCD)

    The Sun Certified Business Component Developer (SCBCD) certification targets information regarding Java components related to distributed applications, specifically Enterprise Java Beans (EJBs). To achieve this certification, the candidate must pass