How to use 'at selection screen on exit command'

Hi,
How do I use the above event in the following scenario.
Scenario: I have a report program which has two radio buttons on the selection screen to which user command is assigned. On selection one, some fields should get disappeared on the selection screen. But one of the fields is a mandatory field, which doesn't allow to proceed unless we enter some value in that(which is redundant since anyway it will be disappearing).
I thought 'on exit command' event works, but the user command assigned to the radio button is not of type E.
Issuing a message at selection screen instead of making the field mandatory will work, but I don't want to do that.
Can anyone please tell me how to handle this?
Incorrect answers will be suitably punished.
Thanks,
Sumanth
Edited by: Julius Bussche on Sep 26, 2009 12:40 PM
Silly comment suitably modified.

do not make that field mandatory using obligatory. so now your radio button work is done.
now, how to make the field look like and work like mandatory field on execution:
at selection-screen output.
loop at screen.
   if screen-name = 'P_MAN'. " lets say this is the field which you want to make mandatory.
      screen-required = 2. "this will just put a tick mark on the input , looks like mandatory.
   endif.
endloop.
now, how to check the mandatory option.
at selection-screen.
if p_man is initial.
display your message to fill this.
endif.
hope this helps...
and as per forum rules, kindly do not encourage people by talking about forum rules.

Similar Messages

At selection-screen on exit-command

hi to all my querry is as follows . pls tell what is the usse of
at selection-screen on exit-command event where do we use it . can u pls give some sample coding . points will be rewarded definitely .

Hi
We use<b> exit-command </b> in Module pool programs to come out of the Program, without entering data in the madatory fields on screen.
We don't use exit commands for selection screens in Reports
So you are asking this exit command for selection screens
see the sample code for Module pools programs
PROCESS AFTER INPUT.
Forced Exit from the transaction
MODULE exit AT EXIT-COMMAND.
*&      Module exit INPUT
Exit from the Transaction
MODULE exit INPUT.
CASE okcode.
    WHEN 'EXIT' OR 'CANCEL'.
      CLEAR okcode.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " exit INPUT
Reward points for useful Answers
Regards
Anji

How to use At Selection Screen for fields whiledealing with Multiple Blocks

Hi Guys,
            In my requirement i am having 4 blocks.1st block with raduio buttons for activating the opther 3 Blocks.
              In these 3 blocks i am having some fields.
       How to do Validation for these fields.?
I am using At Selection-screen on S-SCAD1. I am getting error"S_SCACD1 is neither a selection screen nor a Parameter"
On the top of this" At Selection-screen on S-SCAD1" I am having"AT SELECTION-SCREEN OUTPUT."
                Can anybody tell me how to solve this error?
Thanks,
Gopi.

If you are using your block name than you should use like:
AT SELECTION-SCREEN ON BLOCK S-SCAD1.
Regards,
Naimesh Patel

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

How to avoid default selection screen in HR interfaces(using pnp ldbs)

How to avoid default selection screen in HR interfaces(using pnp ldbs)

Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen.

Script logic - how to use a selection variable within an allocation logic

Hi,
I want to implement a simple top-down distribution to distribute values from a yearly budget (Y20xx.TOTAL) to a quarter budget (Q20xx.Q1, ... Q20xx.Q4) using the actuals of the previous year as reference.
If we hard code the members it works fine:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=SBO; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
Of course, we want to make this dynamic, using the values inputted in the selection screen of the package: time, entity and category.
So if we start with write the following logic, it does not work anymore:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=%TIME_DIM%; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=%CATEGORY_DIM%; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
So, how to use the selection variables in this allocation logic? %TIME%, %CATEGORY% also did not work ...
regards
Dries
solved it ...
Edited by: Dries Paesmans on Feb 22, 2009 8:31 PM

Hi Dries,
Looks like you solved this, but if I can just add a small point -- when you use syntax like this:
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN);
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL);
each time the logic runs, it will scan through the dimension from the FIN and Q2009.TOTAL members, one level at a time, until it reaches the base members (where calc = 'n'). This may happen very quickly, if the dimension has very few levels, but could take a bit of extra time if it's a particularly deep dimension. (By which I mean many levels of hierarchy -- not some 1970's Pink Floyd musical reference.)
You may speed things up by using a member property instead of the BAS(xyz). Flag all the base members using a specific property value, and that way the logic engine can pick up the complete list of members in the WHERE clause, in a single query.
*DIM Account What=ACC_NOT_ASSIGNED; Where=[FloydProperty]="DarkSideOfTheMoon"; ...
This adds some maitenance work in the dimension, which may be problematic if your admins are changing it regularly (and will cause problems if they forget to update this particular property).
I can't predict how much time this will save you (maybe not much at all), but anyway I figure you'd want to know exactly what work you're asking the system to perform.
Regards,
Tim

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to use conditional success Screen in SMP2.3 HWC?

Hi All,
Do anybody have reference for conditional success screen,
I gone through this link SUP 2.2 Conditional Navigation Issue
but i didnt able to do how to use conditional success Screen.
If anybody have reference please provide me.
Regards,
Sravanya

That works. Follow the below steps.
1. Create a key on the selection screen: click on the selection screen>properties>keys>Add a key,ex. "value".
2. MenuItem>In the properties of menu item>Parameter mappings>map the key with the key created in last step.ie. "value" instead of the key of the choice box.
3. Get the value selected from choicebox:
function customValidateScreen(screenKey, values) {
if(screenKey === "Selection")
var form = document.forms[screenKey + "Form"];
if(form){
SelectionValue = form.ChoiceboxKey.value;
//ChoiceboxKey is the key of choicebox.
//Declare a global value "SelectionValue "
3. Map PK from program:
customBeforeSubmit = function(screenKey, actionName, dataMessageToSend) {
if(screenKey =="Selection" && actionName=="GoToChart" ){
var myNewValue2 = new MessageValue();
myNewValue2.setKey("Value");// Key created in the screen "Selection"
myNewValue2.setValue(""+SelectionValue );
myNewValue2.setType("TEXT");
var mvc = dataMessageToSend.getValues();
if( mvc ) {
mvc.add( myNewValue1.getKey(), myNewValue1 );
// So in the above way the data from choice box is send to online request.
To do the conditional navigation you have to use the global value created,ex.
hwc.customConditionalNavigation = function(currentScreenKey, actionKeyName, defaultNextScreen, conditionName, incomingDataMessage) {
if( conditionName === 'Data'&& SelectionValue == "PieChart") {
         return false;
     }else{
    return true;
Hope you understand how I did this.
Midhun VP

Want to use ldb selection screen with select queries

I want to use ldb selection screen with select queries since ldb having performance issue .How can I use the fields of the dynamic selection of LDB in the select queries

Hi,
Check the code snippet below: Here 'XXXX' is the table for your select query.
DATA L_DS_CLAUSES TYPE RSDS_WHERE.
MOVE 'XXXX' TO L_DS_CLAUSES-TABLENAME.
READ TABLE DYN_SEL-CLAUSES WITH KEY L_DS_CLAUSES-TABLENAME
                             INTO L_DS_CLAUSES.
SELECT * FROM XXXX
          WHERE field1 IN ...
           AND   field2 ....
           AND (L_DS_CLAUSES-WHERE_TAB).
      PUT XXXX.
ENDSELECT.
You can also try using the FM 'RS_REFRESH_FROM_DYNAMICAL_SEL' passing SY-CPROG in curr_report and 'M' for mode to get the dynamic selection screen values.
Regards,
Munesh.

How to generate dynamic selection-screen?

Hi all,
I have two radio buttons on selection-screen.
If user-selects the one, Then under the radio button another parameter should be displayed
if he selects another radio button, the previous parameter should not be displayed and another parameter should appear in the selection screen under the second radio button.
Please help by giving the code to solve this problem?
Thanks,
Vamshi.

Hi Vamsi,
By using AT SELECTION-SCREEN OUTPUT and creating the MOdif id for the selection screen parameter you can achieve the dynamic selection scree..
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
see the below example....
copy the below code you can come to know how the dynamic selection screen happens..
*                   S E L E C T I O N S C R E E N                     *
* Selection criteria
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rb1 RADIOBUTTON GROUP gr1 USER-COMMAND com1 DEFAULT 'X',
                                         "Process STR's in date range
           p_rb2 RADIOBUTTON GROUP gr1. "Process STR's from Excel
SELECTION-SCREEN BEGIN OF BLOCK c1 WITH FRAME .
PARAMETERS : p_apover TYPE zcpeg_fg_related-pl_version OBLIGATORY.
                                                            "PJ1031008
SELECTION-SCREEN END OF BLOCK c1.
SELECTION-SCREEN END OF BLOCK b1.
* Display date range to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_banfn FOR w_preq MODIF ID ir1,
                                    "Purchase requisition number
                s_lfdat FOR w_lfdat MODIF ID ir1.
"Date range
SELECTION-SCREEN END OF BLOCK b2.
* Option for uploading file to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_file TYPE rlgrap-filename MODIF ID ir2. "File name
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
Regards,
Prabhudas

To use the selection screen entry in another program

dear all,
i have a requirement that i want to use the selection screen entry of my zmodule pool to the selection screen of a zreport and want to use its output in my module pool.
how could i do this in my module pool programing??
i hope u get my question, i want to use the output of my zreport in my module pool with the same selection screen as given in module pool.,directly in my module pool output without opening my zreport seperately for this same selection screen data

Hi,
You can use SUBMIT statement in your module program to call the zreport program in background.
Press F1 on Submit statement and you will find required detials of this statement. For using submit statement
you have to create an internal table of type RSPARAMS and pass it in the submit statement.
eg.
DATA :
* table to be passed to background report 'ZREPORT1'
    int_rspar TYPE TABLE OF rsparams,
    ws_rspar TYPE rsparams.
CONSTANTS: c_include     TYPE rsparams-sign               VALUE 'I',
           c_kind        TYPE rsparams-kind               VALUE 'S',
           c_between     TYPE rsparams-option             VALUE 'BT'.
*Preparing the table to be passed to the background report.
*populating SELECT-OPTION for knb1-kunnr (Customer Number)
CLEAR : ws_rspar.
ws_rspar-selname = 'S_KUNNR'. "Should be the name of select option as in                               the called report
ws_rspar-kind = c_kind.
ws_rspar-sign = c_include.
ws_rspar-option = c_between.
ws_rspar-low = '1'.
ws_rspar-high = '100'.
APPEND ws_rspar TO int_rspar.
*populating SELECT-OPTION for knb1-bukrs (Company code)
CLEAR : ws_rspar.
ws_rspar-selname = 'S_BUKRS'.
ws_rspar-kind = c_kind.
ws_rspar-sign = c_include.
ws_rspar-option = c_between.
ws_rspar-low = 'a'.
ws_rspar-high = 'z'.
APPEND ws_rspar TO int_rspar.
submit zreport
with selection-table int_rspar
      EXPORTING LIST TO MEMORY
          and return.
The above code will execute the zreport in backgournd.
Now to get the output of the zreport :-
*This internal table stores the value
*Of output listed to memory
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list
* To read from the memory. The output of the program that is executed in background is then populated in the itab_list table.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
* To write it onto the output
CALL FUNCTION 'WRITE_LIST'
EXPORTING
WRITE_ONLY = 'X'
TABLES
listobject = itab_list
EXCEPTIONS
EMPTY_LIST = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Bhavesh.

How to disable the Selection screens of LDB's ?

Hi,
How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Predefined LDB?
Thanks & Regards,
Gopi.

Hi Gopi,
Go through the link,
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Regards,
Azaz Ali.

How to restric the selection screen option

Hi,
This is my first time to use this site. I am working on report which is OM report using PCH logical DB. when I run the report it runs for all OBJID instead of running for the select one(the one I use on selection screen).
Does any one has any Idea why is this doing that and how to fix it.

after GET OBJEC uss te folliwng check..
CHECK OBJID in PCHOBJID.
~Suresh

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to use 'at selection screen on exit command'

Similar Messages

Maybe you are looking for