How to use case when in Select qry?

Hi Friends,
I want to use Case when in Select qry, my situation is like this
SELECT bmatnr blgort bj_3asiz bmat_kdauf b~mat_kdpos
       SUM( ( case when bshkzg = 'S' then bmenge else 0 END ) -
        ( case when bshkzg = 'H' then bmenge else 0 END ) ) AS qty
       INTO corresponding fields of table it_projsal
    FROM mseg AS b
        INNER JOIN mkpf AS a ON bmblnr = amblnr
                            AND bmandt = amandt
    WHERE abudat < '20061201' AND blgort IN ('1050')
      and b~mandt = '350'
    GROUP BY bmatnr bj_3asiz bmat_kdauf bmat_kdpos b~lgor
If we give like this it gives an error.
Please help me, how to use or handle in select qry itself.
Regards
Shankar

this is not a way to select data from the DB tables.
first get all the data from the DB tables then u have to do SUM Ups .
Regards
prabhu

Similar Messages

How to use case when function to calculate time ?

Dear All,
May i know how to use case when function to calculate the time ?
for the example , if the First_EP_scan_time is 12.30, then must minus 30 min.
CASE WHEN FIRSTSCAN.EP_SHIFT <> 'R1' AND FIRSTSCAN.EP_SHIFT <> 'R2'
THEN ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF((CASE WHEN SHIFTCAL.EP_SHIFT = 'N1'
THEN CONVERT(VARCHAR(8),DATEADD(DAY,+1,LEFT(FIRSTSCAN.EP_SCAN_DATE ,8)),112) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','')
ELSE LEFT(FIRSTSCAN.EP_SCAN_DATE ,8) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','') END),12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0 - 0.25) AS FLOAT),2)
ELSE ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF(FIRSTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0) AS FLOAT),2) END AS OTWORK_HOUR

Do not use computations in a declarative language. This is SQL and not COBOL.
Use a table of time slots set to one more decimal second of precision than your data. You can now use temporal math to add it to a DATE to TIME(1) get a full DATETIME2(0). Here is the basic skeleton.
CREATE TABLE Timeslots
(slot_start_time TIME(1) NOT NULL PRIMARY KEY,
slot_end_time TIME(1) NOT NULL,
CHECK (start_time < end_time));
INSERT INTO Timeslots --15 min intervals
VALUES ('00:00:00.0', '00:14:59.9'),
('00:15:00.0', '00:29:59.9'),
('00:30:00.0', '00:44:59.9'),
('00:45:00.0', '01:00:59.9'),
('23:45:00.0', '23:59:59.9');
Here is the basic query for rounding down to a time slot.
SELECT CAST (@in_timestamp AS DATE), T.start_time
FROM Timeslots AS T
WHERE CAST (@in_timestamp AS TIME)
BETWEEN T.slot_start_time
AND T.slot_end_time;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to use case when statements in ODI

I need to put conditional logic before DVM look up in ODI. In the expression editor I put the following statement:-
CASE WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS' THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME=EBIZ_CELL.CELL_DATA
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC' THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)=EBIZ_CELL.CELL_DATA
END
It did not work,
Under Operators ->All Executions, found the error:-
905 : 42000 : java.sql.SQLException: ORA-00905: missing keyword
The description in Session Task contained:-
select
     C1_JOURNAL_TEMPL
from     APPS.POC_JOURNAL_TEMP_SOURCE_TBL POC_JOURNAL_TEMP_SOURCE_TBL, APPS.C$_0POC_JOURNAL_TEMP_TARGET_TB
where
     (1=1)
And (CASE
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS'
THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME=C2_CELL_DATA
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC'
THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)=C2_CELL_DATA
END)
Checked the above code in PL/SQL Developer but it gave errors.
In PL/SQL developer tried to check a simple query using case-when but even that is giving errors in the case-when portion.
The query is as follows:-
select phase_code, accounting_period, sum(eff_cc) as BD_Eff_QTD
from prj_detail
where
case POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
when 'EXT'
then
1
when 'RAC'
then
2
when 'XXX'
then
3
else
end
I would like to know what is wrong with the above code.
Please let me know what is the correct way of using case-when in PL/SQL as well as in ODI.

Your ODI case statement and PL/SQL Case statement both looks confusing.
You are writing case statement under where clause which is not a good practise. If you want to implement logic like-
select a,b,c from <table>
where
when cond^n^ 1 then do 1
when cond^n^ 2 then do 2
then better you seperate your query for each filter and do a union, in other words-
select a,b,c from <table>
where cond^n^ 1
union
select a,b,c from <table>
where cond^n^ 2
If you are writing case staement to retrieve a value/column (EBIZ_CELL.CELL_DATA) then no need to include it under filter.
ODI case for column EBIZ_CELL.CELL_DATA will be:
CASE
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS'
THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC'
THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)
END
Pl/SQL query-
select phase_code, accounting_period,
case POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
when 'EXT'then 1
when 'RAC' then 2
when 'XXX' then 3
else 'default value' --- (if no else needed then can also remove else part)
end,
sum(eff_cc) as BD_Eff_QTD
from prj_detail
Suggested as per what is understood, hope it helps.
Edited by: 939451 on Jul 5, 2012 12:47 AM
Edited by: 939451 on Jul 5, 2012 12:48 AM

Using Case When

I have a situation where i need to write a case when sql expression to fetch certain rows from a table.
How to use CASE WHEN THEN ELSE END in a report query ?
Explanation with a simple example will be of great help.
thanks

The javadoc for oracle.toplink.expressions.Expression
contains some information.
The following is an example of how to build the case statement.
This will use case to replace the keys in the caseTable with the values. The default value (the ELSE) is provided as the second argument.
     Hashtable caseTable = new Hashtable(3);
     caseTable.put("Bob", "Bobby");
     caseTable.put("Susan", "Susie");
     caseTable.put("Eldrick", "Tiger");
     Expression expression = builder.get("firstName").caseStatement(caseTable, "No-Nickname").equal("Bobby");

How to use case to replace the & in select statement

Oracle version : 11.1.0.6.0
RHEL
Hi,
I want to get a list of all expired and locked users but want to replace the "&" with and here is my code but it isn't working.
Please some guidance, thanks.
SQL> select username,
2 case (account_status like 'EXP%' then 'EXPIRED AND LOCKED'
3 ELS 'no locked users'
4 end) account_status
5 from dba_users
6 where account_status like 'EXPI%';
case (account_status like 'EXP%' then 'EXPIRED AND LOCKED'
ERROR at line 2:
ORA-00907: missing right parenthesis

798188 wrote:
thanks for the comments I corrected the ELSE and 'EPX%' but still same error :
EOH> select username,
2 case (account_status like 'EXP%' then 'EXPIRED AND LOCKED'
3 ELSE 'no locked users'
4 end) account_status
5 from dba_users
6 where account_status like 'EXP%';
case (account_status like 'EXP%' then 'EXPIRED AND LOCKED'
ERROR at line 2:
ORA-00907: missing right parenthesisFirst of all, you do not need a CASE statement.
Did you see the where clause of your query??
6 where account_status like 'EXP%';do you realise that your query will always return those records for which value of account_status column starts with 'EXP'?
Why use CASE when it could be simply written like this :
SELECT username,
'EXPIRED AND LOCKED'
FROM dba_users
WHERE account_status LIKE 'EXP%'

How to use case function in where clause

Hi,
Suppose a table DEMO has columns
DEMO TABLE
user_id
user_name
location
In this table i have 15 users. but out of 15 users i want to use only 5 users for passing as user_name.
then how to achieve the result
1. when i pass the particular 5 user_name in where clause then i should get all the user_name and for other 10 users it will show only the passing user_name.
how to use case function

Do you mean this ?
SQL> var name varchar2(10)
SQL> exec :name := 'ALLEN'
PL/SQL procedure successfully completed.
SQL> select ename from emp where case when :name in ('SMITH','ALLEN') then ename
2 else :name end = ename;
ENAME
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
14 rows selected.
SQL> exec :name := 'SMITH'
PL/SQL procedure successfully completed.
SQL> select ename from emp where case when :name in ('SMITH','ALLEN') then ename
2 else :name end = ename;
ENAME
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
14 rows selected.
SQL> exec :name := 'BLAKE'
PL/SQL procedure successfully completed.
SQL> select ename from emp where case when :name in ('SMITH','ALLEN') then ename
2 else :name end = ename;
ENAME
BLAKERgds.

Update multiple rows using CASE WHEN

I have the table ACCOUNT of structure as follow:
ACCOUNT_ID
ACCOUNT_STATUS
004460721
2
042056291
5
601272065
3
I need to update the three rows at once using one SELECT statement such that, the second column will be 5, 3, 2 respectively.
I used the following query but seems there is something missing
UPDATE ACCOUNT
SET ACCOUNT_STATUS = CASE
WHEN ACCOUNT_STATUS = '004460721' THEN 5
WHEN ACCOUNT_STATUS = '042056291' THEN 3
WHEN ACCOUNT_STATUS = '601272065' THEN 2
WHERE ACCOUNT_ID IN ('004460721','042056291','601272065')
My question, is this way correct? if no, can I use CASE WHEN statement and how or I only have choice of using SUB-SELECT to acheive that in one statement?

Hi,
Hawk333 wrote:
I have the table ACCOUNT of structure as follow:
ACCOUNT_ID
ACCOUNT_STATUS
004460721
2
042056291
5
601272065
3
I need to update the three rows at once using one SELECT statement such that, the second column will be 5, 3, 2 respectively.
I used the following query but seems there is something missing
UPDATE ACCOUNT
SET ACCOUNT_STATUS = CASE
WHEN ACCOUNT_STATUS = '004460721' THEN 5
WHEN ACCOUNT_STATUS = '042056291' THEN 3
WHEN ACCOUNT_STATUS = '601272065' THEN 2
WHERE ACCOUNT_ID IN ('004460721','042056291','601272065')
My question, is this way correct? if no, can I use CASE WHEN statement and how or I only have choice of using SUB-SELECT to acheive that in one statement?
What happens when you try it?
Did you mean "WHEN ACCOUNT_ID = ..."?
A CASE expressions always needs an END keyword.
Depending on your requirements (that is, why are those rows being changed, and how do you determine the new values) a CASE expression in an UPDATE statement, similar to what you posted, could be a good way to do it. MERGE (instead of UPDATE) would also be an option, especially if you want to avoid updating rows that already happen to have the correct values.

Using case when statement or decode stament in where clause

hi gems..
i have a problem in the following query..
i am trying to use case when statement in the where clause of a select query.
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
cr.salary as salary
from customer_details cr
where (case when '>' = '>' then 'cr.salary > 5000'
when '>' = '<' then 'cr.salary < 5000'
when '>' = '=' then 'cr.salary = 5000'
else null
end);
the expression in the when clause of the case-when statement will come from UI and depending on the choice i need to make the where clause.
thats why for running the query, i have put '>' in that place.
so the original query will look like this(for your reference):
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
cr.salary as salary
from customer_details cr
where (case when variable = '>' then 'cr.salary > 5000'
when variable = '<' then 'cr.salary < 5000'
when variable = '=' then 'cr.salary = 5000'
else null
end);
so, in actual case,if the user selects '>' then the filter will be "where cr.salary > 5000"
if the user selects '<' then the filter will be "where cr.salary < 5000"
if the user selects '=' then the filter will be "where cr.salary = 5000"
but i am getting the error "ORA 00920:invalid relational operator"
please help..thanks in advance..

Hi,
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
       cr.salary                                      as salary
from customer_details cr
where (    v_variable = 'bigger'
       and cr.salary > 5000
   or (    v_variable = 'less'
      and cr.salary < 5000
   or (    v_variable = 'eq'
        and cr.salary = 5000
       )Edited by: user6806750 on 22.12.2011 14:56
For some reason I can't write in sql '<', '>', '='

How to use CASE statement in WDA

Hi All,
Can any one Please expain me ' How to use CASE statement in Web dynpro ABAP? '
Please give me an example also.
Thanks in Advance !

Hi,
The usage of case statement in webdynpro is same as used in general ABAP.
Data: l_id type string.
l_id = wdevent->get_string( 'ID' ).
case l_id.
when 'BTN1'.
when 'BTN2'.
when 'OTHERS'.
endcase.
Regards,
Radhika.

Insert using case when

hello ,
i wanna use "case when" statement in the insert , i implement it like this :
currentyear:=1;
insert into test1 (ATTRIB1,ATTRIB2) values ((case when currentyear=1 then 'ok' else 'notOK' end),'val2' );
but it didn't work, i got this error :
ORA-14551: cannot perform a DML operation inside a query
Regards
Elyes
Edited by: user10393090 on 5 janv. 2009 03:32

Better approach is ->
insert into test1 (ATTRIB1,ATTRIB2)
select case
         when &currentyear=1 then
          'ok'
       else
         'notOK'
       end AS attrib1,
       'val2' AS attrib2
from dual;N.B.: Not Tested...
Regards.
Satyaki De.

How to use a function in select clause

hi gems...good evening...
I want to write a select clause from a function. The scenario is like below:
function parameters
CREATE OR REPLACE FUNCTION FUNCTION_DEMO(p_pid IN NUMBER,
p_bankerNum IN NUMBER,
p_banker_name IN VARCHAR2,
p_business_num IN NUMBER,
p_businesses IN table_typ_businesses)
return table_typ_bankers
as .......
global object and table types
CREATE OR REPLACE TYPE obj_typ_businesses AS OBJECT (businesses NUMBER);
CREATE OR REPLACE TYPE table_typ_businesses AS TABLE OF obj_typ_businesses;
CREATE OR REPLACE TYPE obj_typ_bankers AS OBJECT (banker_num NUMBER(10,0));
CREATE OR REPLACE TYPE table_typ_bankers IS TABLE OF obj_typ_bankers;
The select query
select * from
table(cast(FUNCTION_DEMO(1,
2,
'ALEX',
2,
table(cast(select businesses_id from reference_businesses) as table_typ_businesses) as table_typ_bankers)But it is giving error with Missing expression.
My function is compiled successfully. I just want to make the select query to view the output given by the function i.e the table type "table_typ_bankers".
Please help...thanks in advance..

Hi ,
You can check this and change your code by taking this as an example. I just noted down with simple one input and return as collection type
and how to use/call it in select statement.
SQL> CREATE OR REPLACE TYPE obj_typ_businesses AS OBJECT (businesses NUMBER)
2 /
Type created.
SQL> CREATE OR REPLACE TYPE table_typ_businesses AS TABLE OF obj_typ_businesses
2 /
Type created.
SQL> CREATE OR REPLACE TYPE obj_typ_bankers AS OBJECT (banker_num NUMBER(10,2))
2 /
Type created.
SQL> CREATE OR REPLACE TYPE table_typ_bankers IS TABLE OF obj_typ_bankers
2 /
Type created.
/* Now creating a demo function and just focusing on your one input as collection type */
SQL> create or replace function f11 ( tab_rec IN table_typ_businesses)
2 return table_typ_bankers
3 is
4 t_val table_typ_bankers:= table_typ_bankers();
5 begin
6        dbms_output.put_line('tab_rec count -'||tab_rec.count);
7
8 for i in 1..tab_rec.count
9              loop
10               dbms_output.put_line ('tab_rec value ('||i||')'||tab_rec(i).businesses);
11                       t_val.EXTEND;
12                    t_val(i) := obj_typ_bankers(tab_rec(i).businesses * 12.50);
13              end loop;
14              return t_val;
15 end;
16 /
Function created.
/* To run your function by a select statement */
SQL> SELECT * FROM TABLE(f11(table_typ_businesses(obj_typ_businesses(5),
2                          obj_typ_businesses(12),
3                                         obj_typ_businesses(18))
4                                             ) )
5 /
BANKER_NUM
      62.5
       150
       225
tab_rec count -3
tab_rec value (1)5
tab_rec value (2)12
tab_rec value (3)18Hope this will help you... :)
Thanks!
Ashutosh

How to use CASE stmt in Where clause

Hi,
How to use CASE stmt in WHERE clause?. I need the code. Please send me as early as possible..........

Hi,
1004977 wrote:
Hi,
How to use CASE stmt in WHERE clause?. There's no difference between how a CASE expression is used in a WHERE clause, and how it is used in any other clause. CASE ... END always returns a single scalar value, and it can be used almost anywere a single scalar expression (such as a column, a literal, a single-row function, a + operation, ...) can be used.
CASE expressions aren't needed in WHERE clauses very much. The reason CASE expressions are so useful is that they allow you to do IF-THEN-ELSE logic anywhere in SQL. The WHERE clause already allows you to do IF-THEN-ELSE logic, usually in a more convenient way.
I need the code.So do the peple who want t help you. Post a query where you'd like to use a CASE expression in the WHERE clause. Post CREATE TABLE and INSERT statements for any tables used unless they are commonly available, such as scott.emp). Also, post the results you want from that sample data, and explain how you get those resuts from that data.
See the forum FAQ {message:id=9360002}
Please send me as early as possible..........As mentioned bfore, that's rude. It's also self-defeating. Nobody will refuse to help you because you don't appear pushy enough, but some people will refuse to help you if you appear too pushy.

How to use C:when test... inside column in ADF table

I am using ADF table with below two columns
in First column i have to check the Type of document if it is doc type then i have to use commondlink to download that file ,Otherwise i need to show only text.
for that i added
*<c:when test="{boolean($favoriteType eq 'doc')}">*
which is not working .
please let me know how to use <C:when test... inside column in ADF table
<tr:column sortProperty="favoriteName" sortable="true"
headerText="#{res['favorite.favoritename']}"
width="500" noWrap="false">
<c:choose>
*<c:when test="{boolean($favoriteType eq 'doc')}">*
<tr:commandLink actionListener="#{bindings.downloadFile.execute}"
text="#{row.favoriteName}"
disabled="#{!bindings.downloadFile.enabled}"/>
</c:when>
<c:otherwise>
<af:outputText value="#{row.favoriteName}"/>
</c:otherwise>
</c:choose>
</tr:column>
<tr:column sortProperty="favoriteType" sortable="true"
headerText="#{res['favorite.favoriteType']}" rendered="true">
<af:outputText value="#{row.favoriteType}" id="favoriteType"/>
</tr:column>

Hi Frank,
Thanks it is working like cham..
related to same page i am facing new problem which i posted at below thread
How to get row data runtime @ trinidad table , set rowSelection="multiple"
can u reply on same.
Thanks for all help.
Jaydeep

Using case when statement in the select query to create physical table

Hello,
I have a requirement where in I have to execute a case when statement with a session variable while creating a physical table using a select query. let me explain with an example.
I have a physical table based on a select table with one column.
SELECT 'VALUEOF(NQ_SESSION.NAME_PARAMETER)' AS NAME_PARAMETER FROM DUAL. Let me call this table as the NAME_PARAMETER table.
I also have a customer table.
In my dashboard that has two pages, Page 1 contains a table with the customer table with column navigation to my second dashboard page.
In my second dashboard page I created a dashboard report based on NAME_PARAMETER table and a prompt based on customer table that sets the NAME_ PARAMETER request variable.
EXECUTION
When i click on a particular customer, the prompt sets the variable NAME_PARAMETER and the NAME_PARAMETER table shows the appropriate customer.
everything works as expected. YE!!
Now i created another table called NAME_PARAMETER1 with a little modification to the earlier table. the query is as follows.
SELECT CASE WHEN 'VALUEOF(NQ_SESSION.NAME_PARAMETER)'='Customer 1' THEN 'TEST_MART1' ELSE TEST_MART2' END AS NAME_PARAMETER
FROM DUAL
Now I pull in this table into the second dashboard page along with the NAME_PARAMETER table report.
surprisingly, NAME_PARAMETER table report executes as is, but the other report based on the NAME_PARAMETER1 table fails with the following error.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1756 message: [Oracle][ODBC][Ora]ORA-01756: quoted string not properly terminated. [nQSError: 16014] SQL statement preparation failed. (HY000)
SQL Issued: SET VARIABLE NAME_PARAMETER='Novartis';SELECT NAME_PARAMETER.NAME_PARAMETER saw_0 FROM POC_ONE_DOT_TWO ORDER BY saw_0
If anyone has any explanation to this error and how we can achieve the same, please help.
Thanks.

Hello,
Updates :) sorry.. the error was a stupid one.. I resolved and I got stuck at my next step.
I am creating a physical table using a select query. But I am trying to obtain the name of the table dynamically.
Here is what I am trying to do. the select query of the physical table is as follows.
SELECT CUSTOMER_ID AS CUSTOMER_ID, CUSTOMER_NAME AS CUSTOMER_NAME FROM 'VALUEOF(NQ_SESSION.SCHEMA_NAME)'.CUSTOMER.
The idea behind this is to obtain the data from the same table from different schemas dynamically based on what a session variable. Please let me know if there is a way to achieve this, if not please let me know if this can be achieved in any other method in OBIEE.
Thanks.

Using :case when in where clause

Hello,
I need some help with using of case statement in a where clause
Table that contains info about employees taking some coursework:
Class (values could be SAP, ORACLE, JAVA)
Code (if Class is SAP then CODE is not null; if class is any other CODE is NULL)
Start Date (date they began class not null)
End Date (date then ended the class - could be null)
Employee Level(numbers from one through five)
I need a single LOV in forms that should show Employee_Level for input class,code,date.
How to do this?
I started off with this but get 'missing statement error'
select distinct employee_level from e_course
   where (
   case when &class='SAP' then code ='1' and start_date > to_date('20000101','YYYYMMDD') and
                                           end_date < to_date('20000101','YYYYMMDD')
           else
               null
   end) order by employee_level;Thanks

Hi,
user469956 wrote:
But all these examples have only one condition for each case.Depending on how you count, all WHERE clauses have only one condition.
I see an example in that thread that has 6 atomic conditions, linked by AND and OR.
I need to check date & code. This is what is causing the error.Why do you want to use a CASE statement?
Why can't you put all your conditions directly iinto a WHERE clause, soemthing like this:
WHERE   (   &class='SAP'
        AND code ='1'
OR      (   start_date > to_date('20000101','YYYYMMDD')
        AND end_date    < to_date('20000101','YYYYMMDD')
        )I said "something like this" because I don't know what you really want to do.

How to use case when in Select qry?

Similar Messages

Maybe you are looking for