How to use commons Software Component for both WebBrowser & NWDS based VC

Hi,
When I use Visual Composer thru the WebBrowser it shows me a set of Shared & Local repository of Sofwtware components.
But when I open Visual Composer using teh NWDS, it shows something new.
Is there any option to use a common repository/development folder between both the GUI's?
Regards,
Ram.

Hi,
the way to work with VC@Browser and VC@NWDS is via NWDI/DTR.
You may find in the link below the way to configure VC@Browser to the NWDI/DTR. I understand from you post that your NWDS is already connected to DTR.
http://help.sap.com/saphelp_nwce711/helpdata/en/48/a880bf516b35b9e10000000a42189d/frameset.htm
Hope that helps,
Nati

Similar Messages

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the same keypair for both encrypt/decryprt-SunPKCS#11

Dear All,
Subject: To access iKey 2032 token, to retrieve public/private key from iKey 2032 token using pkcs#11 in sdk1.5, to encrypt/decrypt files.
When I separate the encrypt and decrypt part of java program, encryption program works well, whereas decryption program does not decrypt anything in the decrypt file (But there is no error). I printed out the public and private key in both encrypt and decrypt part of java program, its displayed differently::
Encrypt program:
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 10, session object)
modulus: 114338469922835728259534620463489934081917342509275191892563243582065
74380495029336519036972702864998634664269499641616889325482699399559620370181624
72068116957594402738459932902481604823224406859575930392708524033619120886256353
58738237376491107769961041015109436347533548940674900728805627968145581222172729
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 11, session object, sensi
tive, unextractable)
Decrypt Program::
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 12, session object)
modulus: 138556361758970660122782926386849783732271581948935425587968692317930
09262429353977097956605140384961825974398004270547046620971835394362397699233738
54481804748731546655197744692886754946373745924825650876065903334173666990347814
83727290962956934521650035029131176614982652900659797194703065074407857754883163
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 13, session object, sensi
tive, unextractable)
I suspect that every time program generates different set of key, therefore we need to store the generated key during encryption part (i believe it is to be in the keystore) and to use the same for decryption part. Could you please give me a tips how to do this?
Encrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
     Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
     Security.addProvider(p);
     KeyStore ks = null;
     try{
          String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
          password = password.trim();
          char pin[] = password.toCharArray();
          ks = KeyStore.getInstance("pkcs11");
          ks.load(null,pin);
     KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
          KeyPair kp = kpg.genKeyPair();
          kpg.initialize(1024, new java.security.SecureRandom());
          FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
          FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
          Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
          cp.init(cp.ENCRYPT_MODE,kp.getPublic());
          CipherOutputStream cout=new CipherOutputStream(out,cp);
          byte[] input=new byte[8];
          int byteread=in.read(input);
          while(byteread!=-1){
               cout.write(input,0,byteread);
               byteread=in.read(input);
          cout.flush();
          in.close();
          cout.close();
     catch(NoSuchAlgorithmException nsae)
     System.out.println("No Such Algorithm Exception " + nsae.getMessage());
     catch(NoSuchPaddingException nspe)
     System.out.println("No Such Padding Exception " + nspe.getMessage());
     catch(InvalidKeyException ike)
     System.out.println("Invalid Key Exception " + ike.getMessage());
     catch(IllegalStateException ise)
     System.out.println("Illegal State Exception " + ise.getMessage());
     catch(KeyStoreException kse)
     System.out.println("Key Store Exception " + kse.getMessage());
     catch(CertificateException ce)
     System.out.println("Certificate Exception " + ce.getMessage());
     catch(IOException ioe)
     System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
     try{
     Encrypt tl = new Encrypt();
     tl.loginToken();
     }catch(Exception e){
     e.printStackTrace();
Decrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Decrypt.
public class Decrypt
public Decrypt(){}
public void loginToken() {
     Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
     Security.addProvider(p);
     KeyStore ks = null;
     try{
          String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
          password = password.trim();
          char pin[] = password.toCharArray();
          ks = KeyStore.getInstance("pkcs11");
          ks.load(null,pin);
     KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
          KeyPair kp = kpg.genKeyPair();
          kpg.initialize(1024, new java.security.SecureRandom());
          FileInputStream in1 = new FileInputStream("C:\\ReportDBAE.properties");
          FileOutputStream out1 = new FileOutputStream("C:\\ReportDBAD.properties");
          Cipher cipher=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
          AlgorithmParameters algParams = cipher.getParameters();
          cipher.init(Cipher.DECRYPT_MODE,kp.getPrivate(),algParams);
          CipherInputStream cin1=new CipherInputStream(in1,cipher);
          byte[] input1=new byte[8];
          int byteread1=cin1.read(input1);
          while(byteread1!=-1){
               out1.write(input1,0,byteread1);
               byteread1=cin1.read(input1);
          out1.flush();
          in1.close();
          out1.close();
          cin1.close();
     catch(NoSuchAlgorithmException nsae)
     System.out.println("No Such Algorithm Exception " + nsae.getMessage());
     catch(NoSuchPaddingException nspe)
     System.out.println("No Such Padding Exception " + nspe.getMessage());
     catch(InvalidKeyException ike)
     System.out.println("Invalid Key Exception " + ike.getMessage());
     catch(IllegalStateException ise)
     System.out.println("Illegal State Exception " + ise.getMessage());
     catch(InvalidAlgorithmParameterException iape)
     System.out.println("Invalid Algorithm ParameterException " + iape.getMessage());
     catch(KeyStoreException kse)
     System.out.println("Key Store Exception " + kse.getMessage());
     catch(CertificateException ce)
     System.out.println("Certificate Exception " + ce.getMessage());
     catch(IOException ioe)
     System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
     try{
     Decrypt tl = new Decrypt();
     tl.loginToken();
     }catch(Exception e){
     e.printStackTrace();
Configuration file::
name = rainbow_token
library = c:\winnt\system32\dkck201.dll
attributes(*,CKO_PRIVATE_KEY,*) = {
CKA_SIGN = true
attributes(*,CKO_PRIVATE_KEY,CKK_DH) = {
CKA_SIGN = null
attributes(*,CKO_PRIVATE_KEY,CKK_RSA) = {
CKA_DECRYPT = true
}

Hi all,
Now i manage to use the same keypair for both encrypt/decryprt-SunPKCS#11. Below is my code woks well. In my code i hard coded alias name of certificate, did anyone knows how to read alias name of certificate from iKey token 2032??
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
     Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
     String myAlias = "349eefd1-845b-4ba4-9f88-06e9f5cb82f6";
     /** to view alias name
     keytool -list -v -keystore NONE -storetype PKCS11 -storepass PASSWORD
     Security.addProvider(p);
     KeyStore ks = null;
     PrivateKey privKey = null;
     PublicKey pubKey = null;
     try{
          String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
          password = password.trim();
          char pin[] = password.toCharArray();
          ks = KeyStore.getInstance("pkcs11");
          ks.load(null,pin);
          java.security.cert.Certificate cert = ks.getCertificate(myAlias);
          Key key = ks.getKey(myAlias, pin);
          if(key != null) {
               System.out.println("key class: " + key.getClass().getName()); // -> sun.security.pkcs11.P11Key$P11PrivateKey
               System.out.println("key bytes: " + key.getEncoded()); // -> null!!!!!!!
     if(PrivateKey.class.isInstance(key)) {
     privKey = (PrivateKey)key;
     System.out.println("algo: " + privKey.getAlgorithm()); // -> RSA
     //Signature rsasig = Signature.getInstance("SHA1withRSA");
     //rsasig.initSign(privKey);
     //rsasig.update(data.getBytes());
     //byte[] sigBytes = rsasig.sign();
     pubKey = cert.getPublicKey();
     //System.out.println("signed bytes: " +sigBytes);
     //return sigBytes;
     //KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
          //KeyPair kp = kpg.genKeyPair();
          //KeyPair kp = kpg.generateKeyPair();
          //kpg.initialize(1024, new java.security.SecureRandom());
          FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
          FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
          Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
//cp.init(cp.ENCRYPT_MODE,kp.getPublic());
          cp.init(cp.ENCRYPT_MODE,pubKey);
          CipherOutputStream cout=new CipherOutputStream(out,cp);
          byte[] input=new byte[8];
          int byteread=in.read(input);
          while(byteread!=-1){
               cout.write(input,0,byteread);
               byteread=in.read(input);
          cout.flush();
          in.close();
          cout.close();
     catch(NoSuchAlgorithmException nsae)
     System.out.println("No Such Algorithm Exception " + nsae.getMessage());
     catch(NoSuchPaddingException nspe)
     System.out.println("No Such Padding Exception " + nspe.getMessage());
     catch(InvalidKeyException ike)
     System.out.println("Invalid Key Exception " + ike.getMessage());
     ike.printStackTrace();
     catch(IllegalStateException ise)
     System.out.println("Illegal State Exception " + ise.getMessage());
     catch(KeyStoreException kse)
     System.out.println("Key Store Exception " + kse.getMessage());
     catch(CertificateException ce)
     System.out.println("Certificate Exception " + ce.getMessage());
     catch(IOException ioe)
     System.out.println("IO Exception " + ioe.getMessage());
     catch(UnrecoverableKeyException unrke)
     System.out.println("Unrecoverable Key Exception " + unrke.getMessage());
public static void main (String args[]) throws Exception {
     try{
     Encrypt tl = new Encrypt();
     tl.loginToken();
     }catch(Exception e){
     e.printStackTrace();
Your help is very much appreciated!!!!

How to create common file systems for both development & quality systems

Hello Team
Need some calrification & advise
we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
/sapmnt/<SID>
/usr/sap/
/usr/sap/trans/
/db2/IBM
Thanks in advance & Regards
BM

Thanks you Juan for your response
We are planning for seperate DB instance only.
what could be the owner(UID) & group(GID) for the below file systems
/sapmnt/
usr/sap/
usr/sap/trans
Thanks in advance
BM

How to use common event handler for selected movie clips?

I have a 50-state map in a flash movie. Each state is a movie
clip.
Goal: when mouse moves over a state or is clicked in a state,
the state will be highlighted in a bright color and a small box
will pop up near the state and display some information about the
state.
Question: I know I can add mouse event handler for each state
movie clip. But this is simply not good since this has to be done
50 times and codes thus scattered different places. Ideally, I only
want to have one script that determines where the mouse position is
when events trigged and then do right things (highlight the state
and display info. in a pop-up). How can this be implemented?
Thanks!

There are a number of ways. Which way is best depends on how
you have things set up so far.
E.g. If they have an enumerable naming convention:
e.g. each clip is like state_0 , state_1 etc.
Then you can loop through them and assign them all to the
same mouse event handler via the loop. You would need properties
other than the name of the clip to identify the state. E.g. each
clip could contain its own data or the index could be a pointer to
the state data (objects with state name and info properties) in a
separate array.
//state clips named
for (var i=0;i<50;i++) {
this["state_"+i].stateindex=i;
this["state_"+i].onPress= statePressHandler;
var stateData:Array = [{name:"StateName,info:"this state
Info"}, name:"StateName,info:"this state Info"}, etc...]
function statePressHandler() {
trace(this);
trace(stateData[this.stateindex].name+"="+stateData[this.stateindex].info);
Other ways are possible too but the best approach depends on
how you have named the clips and whether you're creating them with
code or whether they're already on stage from authoring (my guess).
If they're already on stage and they're called "Alaska" etc, then I
would be inclined to put them all inside a container clip that
contains nothing else other than states. It would avoid the need
for an array of clip names or for checking some other specific
property of each clip to determine if its a 'state' clip and not
something else in a for..in loop.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I have an old Ipad and an IPad Air. I used one Apple ID for both IPads. Now I wish ti split the iCloud storage and separate the two. I want to change my new IPad Air to a New Apple ID. How do I do it?

I have an old Ipad and an IPad Air. I used one Apple ID for both IPads. Now I wish to split the iCloud storage and separate the two. I want to change my new IPad Air to a New Apple ID. How do I do it?

Go to Settings > iCloud > Delete Account, and enter your Apple ID password. Then sign in with the new ID.
NOTE: "Delete Account" just means it will be deleted from the iPad. The account itself will not be deleted.

We have two iphones and only one ipad. We want to be able to use "find my iphone" for both phones, which have separate apple ids. How do we get our ipad to accept this?

We have two iphones and only one ipad - no mac. We want to be able to use "find my iphone" for both phones. How do we get the ipad to accept two iphone accounts? icloud is enabled on all three devices.

Also, be aware of the following:
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices.

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices?

http://itunes.apple.com/us/app/find-my-iphone/id376101648?mt=8
That app is also compatible with the iPad and requires iOS 3.1.3 or later.

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique?

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique and keep them separate. thank you for your help!

This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards.

HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers!

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to use common resource bundle across all the development components ?

Hi,
I am working on SAP NetWeaver Developer Studio - JAVA
How to use common resource bundle across all the development components ?
Description :
I have a requirement of creating a resource bundle (resource.properties) and use that common resource bundle in all the development components.
Can we create a development component (war and ear both) and create only resource.properties in this development component( DC ) and create the dependency of the same DC in all the other DCs ?
Thanks,
Neha

Hello Neha
This question is more NWDS related.
You may have a better chance of someone answering the thread under
SAP Netweaver -> SAP NetWeaver Development Infrastructure (NWDI, formerly known as JDI) forum
Thanks
Kenny

Where do I find help on how to use a software?

Recently I've purchased a ZIP software through App Store - (Smart Zipper Pro). I have never used one of these programs and now have a large file to send to a customer. I found no customer support nor directions on the use of it.
I will appreciate there is someone that could help me understanding how to use this software. I have tried different alternatives but files seems to have the same size as the original. There is no compression.
Your help on this subject will be greatly appreciated.
AntaresPower

have a large file to send to a customer.
*Some suggestions regarding sending large files:*
If you both have High-speed connections, the easiest & fastest way is through Dropbox.
I send all my large/huge files this way instead of using email.
iChat has the same ability of transferring large files as Dropbox but is slower.
Adium has file transfers.
Yahoo Messenger has file transfers.
If you must use email, check out YouSendIt and TransferBIGFiles for large & small file transfers.
MediaFire is another file transfer site.
Care to share which OS you are using?

How can i delete software component in the IR

How can i delete software component in IR,when there are too many SCs?

If you have to delete a SWCV, you have to delete all the namespaces with in that first. Open a name space and delete all the user defined objects in that first. Then delete the Std Fault and log data types and delete it and remove the name space from the SWCV by opening the SWCV and using - button on the name space. Now activate the changes. This will delete the name space.
Repeat the step for all the name space with in the SWCV. After all objects are deleted. Open the SWCV and use the menu, SWCV ->Delete object.
Regards,
Jai Shanakr

How to use commons Software Component for both WebBrowser & NWDS based VC

Similar Messages

Maybe you are looking for