How to use customize mouse cursor?

Hello everyone
i want to use my own pictures as the mouse cursor. How can I make it?
Thank you

Try using ToolKit.getDefaultToolKit().createCustomCursor() as a first step.

Similar Messages

When I'm filling in the form on a website Firefox jumps down past the next block and I have to go back using my mouse cursor

For example on Find-A-Grave when filling in the form to add a memorial there are several blocks that you fill in including location. For some blocks you type in the information and others are pick one of the preset selections. I generally hit the tab key on my keyboard and goes to the next block except when it comes to the preset selection blocks. If I use the tab key to go to the next selection it skips right past the next selection to the selection below that. For example, after I fill in the year I hit the tab key and type u for the United States under the country selection. But in order to get the next block to appear I have to hit tab again (but only when using your browser). Your browser then skips past the state selection to the county selection. Then when I pick the state using the cursor it does it again and drops down to the Bio past the county selection.
When I use Internet Explorer I don't have this problem. I merely hit the tab button on my keyboard and it goes to the next selection rather than as your browser does that is skips to the block below.
Is there some reason you have it set up this way because it is quite annoying to have to go back up each time using the mouse cursor rather than continuing to use the keyboard to fill in everything (typing, tab key or using the arrow keys). To say the least it slows the whole process down a lot. No, it is not my computer. I've had the exact same problem using another computer. No, it is not the find-a-grave website. I just used it as an example. Using your browser forces me to stop using the keyboard to fill in a form and use the mouse and then the keyboard and then the mouse and then the keyboard and then the mouse, etc when it shouldn't be necessary when filling out a form on a website.

Are you having the problem with just the one site? Others?
Please post some public linkss.
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

Could anyone tell me how too change the mouse cursor to the waiting mode?

Could please anyone tell me how too change the mouse cursor to the waiting mode while my applet is processing?
Well i have 3 combos in my applet.....and in my actionPerformed code i have:
public void actionPerformed(ActionEvent e) {
if (e.getSource() == combo1) {
          setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_reg = combo1.getSelectedIndex();
Do_Accion1();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
if (e.getSource() == combo2) {
setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_mun = combo2.getSelectedIndex();
Do_Accion2();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
if (e.getSource() == combo3) {
setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_loc = combo3.getSelectedIndex();
Do_Accion3();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
} // Fin action event
But my cursor is never change to WAIT_CURSOR....Somebody could help me please?....
Thanks in advance....
Mary

YourComponent.setCursor(
     Cursor.getPredefinedCursor(
     Cursor.WAIT_CURSOR));

In facebook, When I access a picture directly, I am unable to advance the photo forwards or backwards using the mouse/cursor or the arrow keys.

I am using Firefox 16.0.1 on a macbook pro using 10.7.5 software.
When I access a picture directly, I am unable to advance the photo forwards or backwards using the mouse/cursor or the arrow keys. The same is true if I use an external mouse.
If I use Safari as the browser, I don't have this issue.
This problem just started a couple of days ago.
All had been working fine.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

How to extract the mouse cursor image without using JNI

I want to get the image of the mouse cursor of the system using java. The Robot class captures the screen only, but the mouse icon image is not the part of the screen, so it is not easily detected. But we can get the mouse cursor position using API, but how to get the exact image icon, without using JNI. I don't want to generate my own cursor at that position.

I am building a Remote Desktop kinda app using java..... I want the screen of the remote comp to be viewed on my screen and generate events from my machine to the remote machine. So, I am capturing the screen images of the remote machine. But the cursor is not part of the screen object. i want to extract the cursor image icon from the remote machine to my machine and render the image.

How to rotate a mouse cursor?

I want to rotate the mouse cursor pointer.
Basicaly I have:
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="vertical"
verticalAlign="middle"
backgroundColor="white">
   <mx:Script>
<![CDATA[
import mx.managers.CursorManager;
[Bindable]
[Embed(source="assets/bug.png")]
private var BugIcon:Class;
[Bindable]
[Embed(source="assets/bug_delete.png")]
private var BugDeleteIcon:Class;
private var cursorID:int;
]]>
</mx:Script>
   <mx:ApplicationControlBar dock="true">
   <mx:Button label="setBusyCursor()"
click="CursorManager.setBusyCursor();" />
   <mx:Button label="removeBusyCursor()"
click="CursorManager.removeBusyCursor();" />
   </mx:ApplicationControlBar>
   <mx:Button label="setCursor()"
width="100"
height="100"
rollOver="cursorID = CursorManager.setCursor(BugIcon);"
rollOut="CursorManager.removeCursor(cursorID);" />
</mx:Application>
Now I want to rotate mouse cursor.
Please Help

There are no APIs directly for that. Maybe try rotating the cursor. It should be systemManager.cursorChildren.getChildAt(0) or maybe 1 or 2.
-Alex

Please Help!!! How to use the Hand cursor on an Image !!!!

Hi,
I am sorry for cross posting but nobody seem to know this, i need this as soon as possible.
I have a main Jframe which contains a Jpanel which contains a jscrollpane. THe image is in scrollpane and i would like to use the Hand cursor to move the image up and down the jscrollpane.
Can someone tell me or show me how can i use a hand cursor on an image
I would appreciate if someone can show me a simple example.
THanks in advance.

Well. I would call setCursor with a cursor of type Cursor.HAND_CURSOR or something on the Component where you want the hand. Then you could add a MouseMotionListener to the Component. in mouseDragged() you scroll the scrollpane programmatically according to the MouseEvents getX() and getY().

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to cure unstable mouse cursor ?

After installing Snow Leopard I've had problems with the mouse cursor flying wildly to the edge of the screen, which makes retouching photos very difficult. Does anyone have any suggestions?

Have you checked Systems Prefs > Mouse, to see if the settings are as they should be? Especially, tracking, double click, scrolling etc which I have set around the middle of the slide bar, but you may prefer differently.

How to change the mouse cursor

Hi,
I need to change the mouse cursor on a mouseover event of a text filed?
Please help for the same...
Thanks,
Abhijit

I guess your are simply out of luck.....share with us if you find a way.

How to use Rowid in Cursor

Hi all,
Suppose i am updating some Rows in a cursor.
Can u plz let me know the Syntax of Using ROWID in Cursor with a simple example.plzz
i am trying to execute the follwing code but it si throwing error.Here i am trying to update salaries of employees who belong tO IT Department and whose salary is <5000
Declare
Cursor inc_salary is
Select e.employee_id,e.salary,e.department_id,d.department_id DEPART
from employees e,departments d
where e.department_id=d.department_id
and d.department_id='IT'
and e.salary<5000 FOR UPDATE OF SALARY;
Begin
For inc_record in inc_salary
Loop
DBMS_OUTPUT.PUT_LINE('Employee Id is '||inc_record.employee_id);
DBMS_OUTPUT.PUT_LINE('Original Salary is '||inc_record.salary);
DBMS_OUTPUT.PUT_LINE('Department No in Employees Table is '||inc_record.department_id);
DBMS_OUTPUT.PUT_LINE('Department No in Departments Table is '||inc_record.DEPART);
End Loop;
DBMS_OUTPUT.PUT_LINE('Lets Now increase the Salary of Employees');
DBMS_OUTPUT.PUT_LINE('********************************');
For inc_record in inc_salary
Loop
Update employees
Set Salary=5000
where Rowid=inc_salary.rowid;
End Loop;
End;
Edited by: user12920808 on Aug 19, 2012 4:39 AM

You update within
For inc_record in inc_salarywhere inc_salary is a cursor and inc_record is a record where rows inc_salary are fetched into. While in update statement you are referencing cursor.column instead or record. column. You need to change:
where Rowid=inc_salary.rowid;to
where Rowid=inc_record.rowid;However, cursor inc_salary doesn't include employees.rowid, so you need to add it. And it should be department_name = 'IT', not department_id:
Declare
Cursor inc_salary is
Select e.employee_id,e.salary,e.department_id,d.department_id DEPART,e.rowid e_rowid
from employees e,departments d
where e.department_id=d.department_id
and d.department_name='IT'
and e.salary<5000 FOR UPDATE OF SALARY;
Begin
For inc_record in inc_salary
Loop
DBMS_OUTPUT.PUT_LINE('Employee Id is '||inc_record.employee_id);
DBMS_OUTPUT.PUT_LINE('Original Salary is '||inc_record.salary);
DBMS_OUTPUT.PUT_LINE('Department No in Employees Table is '||inc_record.department_id);
DBMS_OUTPUT.PUT_LINE('Department No in Departments Table is '||inc_record.DEPART);
End Loop;
DBMS_OUTPUT.PUT_LINE('Lets Now increase the Salary of Employees');
DBMS_OUTPUT.PUT_LINE('********************************');
For inc_record in inc_salary
Loop
Update employees
Set Salary=5000
where Rowid=inc_record.e_rowid;
End Loop;
End;
Employee Id is 105
Original Salary is 4800
Department No in Employees Table is 60
Department No in Departments Table is 60
Employee Id is 106
Original Salary is 4800
Department No in Employees Table is 60
Department No in Departments Table is 60
Lets Now increase the Salary of Employees
PL/SQL procedure successfully completed.
SQL> And why do you have two loops instead of one. All you need is:
SQL> Declare
2 Cursor inc_salary is
3 Select e.employee_id,e.salary,e.department_id,d.department_id DEPART,e.rowid e_rowid
4 from employees e,departments d
5 where e.department_id=d.department_id
6 and d.department_name='IT'
7 and e.salary<5000 FOR UPDATE OF SALARY;
8 Begin
9 For inc_record in inc_salary
10 Loop
11 DBMS_OUTPUT.PUT_LINE('Employee Id is '||inc_record.employee_id);
12 DBMS_OUTPUT.PUT_LINE('Original Salary is '||inc_record.salary);
13 DBMS_OUTPUT.PUT_LINE('Department No in Employees Table is '||inc_record.department_id);
14 DBMS_OUTPUT.PUT_LINE('Department No in Departments Table is '||inc_record.DEPART);
15 Update employees
16 Set Salary=5000
17 where Rowid=inc_record.e_rowid;
18 End Loop;
19 End;
20 /
Employee Id is 105
Original Salary is 4800
Department No in Employees Table is 60
Department No in Departments Table is 60
Employee Id is 106
Original Salary is 4800
Department No in Employees Table is 60
Department No in Departments Table is 60
PL/SQL procedure successfully completed.
SQL> SY.

Hi, how can I stop my screen from freezing up.Its acts like a scratch card, I use the mouse cursor to rub away to find the password box?

HI,how can I stop my screen from freezing, It acts like a scratch card,I run over it with the mouse to scratch away at the grey screen to find the password box
underneath?

OS X: Login window partially appears, cursor movement redraws screen

PC & Mac Sharing 1 Monitor and KB Setup - How to use KB/Mouse for both?

I am purchasing a Mac Mini to replace my personal computer. I have one monitor/KB/mouse setup shared between my work and personal PC, switched back and forth via a USB KVM switch (http://www.iogear.com/product/GCS632U/)
I want to go with the Apple bluetooth mouse and keyboard with the purchase of my mac mini, but how can I make it so it will work with both my work PC (Windows XP Dell laptop docked) and my new mac mini?
Should I purchase a USB bluetooth dongle and connect that to the mini KVM switch? Or should I just plug the USB dongle into my docked laptop and pair with both the mini and the PC (if pairing to both is even possible)?
Thanks in advance.

If both are on your intranet, try Synergy.
I personally use the Wormhole. You can drag between desktops.

How can i set mouse cursor location in a vi at a particular control button

If there are many string controls on a vi front panel,I want to set my cursor at a particular string control.
Whenever i will give an input ,It should be typed in that string control only.
How can I do that ?
Solved!
Go to Solution.

Hi,
there is a property node which called Key focus, you can use it for the string you want to be enabled.
when you run the vi, the curser goes to the selected string control
check the attached vi.
Attachments:
Untitled 9.vi ‏8 KB

AIR window mode bug? How to use the mouse when transparent?

Hey there,
I'm trying to build a transparent desktop application in AIR and have set the window mode to transparent.
The mouseposition and mouseevents only work when the mouse hovers over a visible movieclip but not on the background.
How can I fix that? Or is it an bug like some people say?
Also in fullscreen mode the stage is a LOT bigger than the actual screen.. i already set:
stage.scaleMode= StageScaleMode.EXACT_FIT;
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
but it doesn't help at all.
thanks for helping

Are you attaching your mouse handlers to the stage? If not, try it -- that's the typical way to capture mouse events within the entire flash player window. I'm not 100% it works with a NativeWindow set to transparent, though, since the main purpose of transparent window background is to simulate a non-rectangle window. If you want to have a transparent background but still act like a rectangular window you can probably just add a transparent rectangle (alpha=0, visible=true) to capture mouse events.
Hope that helps.
-Aaron

How to use customize mouse cursor?

Similar Messages

Maybe you are looking for