How to Use DVD Output as a Device?

I wish to stream playback from a regular DVD to the FME. Needless to say, a DVD player is not recognized as a device by Flash Media Live Encoder.
How do you recommend taking NTSC output of a DVD playback in a PC and making it available to the FME?
Do you recommend using a capture card as an intermediary step? If so, have any of you experience with this?
I want to run the encoder on the same PC as the DVD player and use the DVD video as the source for the encoder. Many thanks.

This is close but not quite it. There is one difference that is important to kepp in mind:
The DVD player I am asking about is *in* the same PC as a the encoder and uses its regular DVD drive. Hence there is no S-Video or composite outputs.
The question is how to recognize the PC-based DVD player output as a 'device' accepted by the FME. I'd like to do this natively at a software level and rather not use a separate DVD player for the the job.

Similar Messages

How to use the Output clause for the updated statment

How to use the output clause for the below update stament,
DECLARE @MyTableVar table(
sname int NOT NULL)
update A set stat ='USED'
from (select top 1 * from #A
where stat='AVAILABLE' order by sno)A
Output inserted.sname
INTO @MyTableVar;
SELECT sname
FROM @MyTableVar;
Here am getting one error incorrect syntax near Output
i want to return the updated value from output clause

see
http://blogs.msdn.com/b/sqltips/archive/2005/06/13/output-clause.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

HT4436 how to use icloud in an android device.

how to use icloud in an android device?

The only iCloud facility you can use is the email: you can set up your email application to access the email on an existing iCloud account (which you need a Mac or an iOS device to set up) by using the settings listed here:
http://support.apple.com/kb/HT4864

How to use filters on ios mobile devices (iPhone/iPad) using GPU rendering (Solved)

Many moons ago I asked a question here on the forums about how to use filters (specifically a glow filter) on a mobile devices (specifically the iPhone) when using GPU rendering and high resolution.
At the time, there was no answer... filters were unsupported. Period.
Well, Thanks to a buddy of mine, this problem has been solved and I can report that I have gotten a color matrix filter for desaturation AND a glow filter working on the iPhone and the iPad using GPU rendering and high resolution.
The solution, in a nut shell is as follows:
1: Create your display object... ie: a sprite.
2. Apply your filter to the sprite like you normally would.
3. Create a new bitmapdata and then draw that display object into the bitmap data.
4. Put the new bitmapdata into a bitmap and then put it on the stage or do what you want.
When you draw the display object into the bitmapdata, it will draw it WITH THE FILTER!
So even if you put your display object onto the stage, the filter will not be visible, but the new bitmapdata will!
Here is a sample app I created and tested on the iphone and ipad
var bm:Bitmap;
// temp bitmap object
var bmData:BitmapData;
// temp bitmapData object
var m:Matrix;
// temp matrix object
var gl:GlowFilter;
// the glow filter we are going to use
var sprGL:Sprite;
// the source sprite we are going to apply the filter too
var sprGL2:Sprite;
// the sprite that will hold our final bitmapdata containing the original sprite with a filter.
// create the filters we are going to use.
gl = new GlowFilter(0xFF0000, 0.9, 10, 10, 5, 2, false, false);
// create the source sprite that will use our glow filter.
sprGL = new Sprite();
// create a bitmap with any image from our library to place into our source sprite.
bm = new Bitmap(new Msgbox_Background(), "auto", true);
// add the bitmap to our source sprite.
sprGL.addChild(bm);
// add the glow filter to the source sprite.
sprGL.filters = [gl];
// create the bitmapdata that will draw our glowing sprite.
sprGL2 = new Sprite();
// create the bitmap data to hold our new image... remember, with glow filters, you need to add the padding for the flow manually. Should be double the blur size
bmData = new BitmapData(sprGL.width+20, sprGL.height+20, true, 0);
// create a matrix to translate our source image when we draw it. Should be the same as our filter blur size.
m = new Matrix(1,0,0,1, 10, 10);
// draw the source sprite containing the filter into our bitmap data
bmData.draw(sprGL, m);
// put the new bitmap data into a bitmap so we can see it on screen.
bm = new Bitmap(bmData, "auto", true);
// put the new bitmap into a sprite - this is just because the rest of my test app needed it, you can probably just put the bitmap right on the screen directly.
sprGL2.addChild(bm);
// put the source sprite with the filter on the stage. It should draw, but you will not see the filter.
sprGL.x = 100;
sprGL.y = 50;
this.addChild(sprGL);
// put the filtered sprite on the stage. it shoudl appear like the source sprite, but a little bigger (because of the glow padding)
// and unlike the source sprite, the flow filter should acutally be visible now!
sprGL2.x = 300;
sprGL2.y = 50;
this.addChild(sprGL2);

Great stuff dave
I currently have a slider which changes the hue of an image in a movieclip, I need it to move through he full range -180 to 180.
I desperately need to get this working on a tablet but cant get the filters to work in GPU mode. My application works too slow in cpu mode.
var Mcolor:AdjustColor = new AdjustColor();   //This object will hold the color properties
var Mfilter:ColorMatrixFilter;                           //Will store the modified color filter to change the image
var markerSli:SliderUI = new SliderUI(stage, "x", markerSli.track_mc, markerSli.slider_mc, -180, 180, 0, 1);   //using slider from http://evolve.reintroducing.com
Mcolor.brightness = 0; Mcolor.contrast = 0; Mcolor.hue = 0; Mcolor.saturation = 0;            // Set initial value for filter
markerSli.addEventListener(SliderUIEvent.ON_UPDATE, markerSlider);                          // listen for slider changes
function markerSlider($evt:SliderUIEvent):void {
    Mcolor.hue = $evt.currentValue;
    updateM();
function updateM():void{
    Mfilter = new ColorMatrixFilter(Mcolor.CalculateFinalFlatArray());
    all.marker.filters = [Mfilter];
how would I use your solution in my case
many thanks.

How to use Bpel output as input in stored procedure

I am a SOA beginner. The scenario is to use the output from a BPEL process in a stored procedure as input and validate it against the data in the database. The data received from BPEL is compared with fields from different tables.
It is basically a business process data validation.
Will the output of BPEL be a Xml file and how it can b used in query of a procedure?
Edited by: 869091 on Jun 29, 2011 12:14 AM

The output from the BPEL process will be in XML format.
Your requirement is not clear, please state it properly what are you trying to do.
-Yatan

How to use "Referenced Output"

Dear Sir/Madam,
I find the concept "Referenced Output" in the GSM user guide， How to use or set Referenced output in formulation?
Thanks
Terry

You can also "graduate" an external output material to a referenced product. From the External Product Material specification, look under the Material Attributes section, you should see the Output Type property with a "graduation cap" next to it (you made need specific role membership, the Oracle docs would have the specifics for this). Clicking the cap icon will change the output type from external to your choice of Referenced - Product, By-Product or waste. Saving the spec will change the output type, but be aware that changing to a referenced output type severs the theoretical roll up link with the original formulation (nutrients will no longer be rolled up from the formulation, nor will breakdowns and compliance information, etc.)

How to use central output server in JSP application

Dear All,
We have developed a jsp application which is running on JBoss.We want to create receipts in PDF format.For this we are using central output server.Our approach is as follows:
When request comes from the user, we are generating .dat file by fetching data from the Oracle database depending upon credentials and then pushing this file into data folder of Central output server.From there we are waiting for PDF file in predefined path.Here we found this is asynchronous way of producing receipts.
Is there any other way that is synchronous or the way we are approaching is the only way of doing it.A sample would be of immense help.
Note:The concurrent hits would be around 5000 in a peak hour.Any help would be highly appreciated.

I don't think you can get things to operate in a synchronous manner. You have one application - perhaps running on a totally separate server - feeding data files to a different application. The only way to make it even semi-sychronous would be to throttle the JSP application in some way to prevent it from placing a new file into Central's data folder while there was already one there.
I assume your problem is knowing which PDF belongs to which user. If that is the case you could send some type of unique identfier (IP#?) as a "job" parameter that would then be used as the specific PDF file name instead of letting Central create a random file name.

How to use java output with other application

hi ,
I am using acme.crypto to encrypt data. this is completely written in java. i need to pass input to this using VB6 and return the output to VB6
how can i achieve the same, is there any readily available dll that can be used in vb?
I am rigorously searching solution, which i am not finding.
I need to know how should i place the java code so that it could be used with VB, as i am new to java world. Do i need to create component using java bean or how?
The code i refered above is nothing but encryption algorithm. I need to pass the input string from vb to java, which will process me the output which inturn should be passed to vb6.
Kindly guide me through this.

Why not create a Java ServerSocket in your Java program.
Connect the VB program to this ServerSocket.
Send the input to the Java Program over this socket and have the Java Program encrypt the information and pass it back on the same socket.
Don't know how hard Sockets are in VB6 but a Server Socket in Java is simple.
No need for new DLLs, JNI, etc.

How to use Digital output to turn on sensor for Analog Input?

I am trying to use a digital output to turn on an array of sensors that I then wish to read on 16 analog input lines. I have a 6024E DAQ card. I am planning to take data at 10-20 hz, so not terribly fast, but I will be acquiring for long periods of time (days) so I will be streaming data to disk.
I have a fair bit of experience in Labview basics, but can quickly get out of my depth when I try something new (like this). I have V6.01.
It looks as though the best way might be to do the DO and then a single AI as individual events, then write to disk and continue through the loop. I am puzzled, however, how to keep this cycle on schedule given that I don't know how long it will take to sample 16 channels
, write the data to disk and get back to the starting point... perhaps this is so fast that I don't need to worry about it? The actual timing of the samples (be it 10 or 20 hz) isn't too critical, as long as I can record at what time they were taken... it would be frustrating to find that I was several seconds off after days of data.

Hello,
Thank you for contacting National Instruments.
If you are worried about the time of your acquisition being off, then you should associate each voltage measurement with a timestamp. This will allow you to know the exact time at which the sample was taken and you will never be off. You can use the Get Date/Time in Seconds.vi in our while loop with your AI code so that you can read a sample and read the time. You can than log the voltage value and the timestamp to your file.
Regards,
Bill B
Applications Engineer
National Instruments

HT204387 How to use iPad Bluetooth with Samsung devices?

Please advice, why my iPad mini 4g new device dose not appear Bluetooth devices from Samsung? How can I transfer some of my old files from samsung note to my new iPad wirelessly ?

Bluetooth can only be used on iOS devices to connect to speakers, headphones, keyboards and a few other items. It cannot be used to transfer files between different devices. There are other ways to do this. Please describe exactly what you want to accomplish and someone here will be able to help you get it done.

How to use counter output pulses to trigger analog input?

Hello all,
I hope the kind people using this forum can help me, a lowly beginner LV programmer! I have been attempting to create a VI that produces a user defined number of TTL pulses, separated by every n seconds. Each TTL would be outputted to a stimulator, which in turn generates its own TTL. Using the stimulator-generated TTL, I would like to trigger finite analog data acquisition (e.g. for every TTL, trigger the collection of a data sweep that contains 4000 samples (collected at 4000 Hz), with 1000 samples collected pre-trigger. I would like to also be able to see each data sweep as it is triggered on a chart. As I understand things (lots of online/book/forum reading), I should be using the counter output to generate my TTL pulses, and syncing each counter produced TTL with analog input, as well as using a reference trigger. Also, the AI part should be started first, so that I don' t miss any counter outputs. If it matters, I also need to use one of the AI channels to acquire the TTL, so I can see my stimulator-induced responses to the stimulator in time.
I am able to generate the TTL pulses from the counter output, but I am having a problem with the AI part. I am unsure how to sync the counter output with AI. Also, since I need to acquire pre-trigger samples, I would be needing to acquire samples continuously, but when I set 'continuous samples' on daqmx timing, the VI doesn't work (hence why's its set to 'finite samples').
I hope someone out there can help, as I have been at this for what seems ages, with limited success. I am using a USB-6259 and LabView v8.2. Thanks!
Attachments:
RC001 v_1.vi ‏49 KB

Hello,
Due to the fact that analog tasks themselves are not retriggerable, a
pulse train produced by a counter is always used as the sample clock
for the analog input task in order to recreate a retriggerable effect
for analog input. This can be done by creating a finite pulse train set
to retriggerable using the DAQmx Trigger Property Node, or the pulse
train could be continuous and just be gated by another signal. Neither
of these methods can be properly applied in hardware to create a
retriggerable reference trigger. You can however implement something
similar in software by just stopping and restarting your reference
triggered analog input task within a loop. There will be some delay
between when the task is stopped and restarted, as these events require
software intervention, but if there is enough time between when each
trigger signal is generated, there should not be any noticeable delay
or missed samples.
I have attached an example of this!
Mark B
===If this fixes your problem, mark as solution!===
Attachments:
RC001 v_1mod.vi ‏25 KB

In formula node how to use array outputs

someone has talked about this. but it is still a problem to me.
no matter how i declare the variable, the output terminal keeps a scalar.

You should be able to declare it using:
int32 VarName[x][y];
That should make an array of 32bit integers.
See one of my earlier posts here: http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000EE2C0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=array+formula+node&USEARCHCONTEXT_QUESTION_S=0
Try copying the code that I posted into your formula node and see if you get an array out. Or try the example I attached with the same code in it.
Let us know if you are still having trouble.
Brian
Attachments:
ArrayFormulaNode.vi ‏23 KB

How to use product recovery with external devices?

I have a Toshiba Satellite laptop and it just happens that I wanted to re-format my windows XP. But I realized that my CD drive isn't working anymore so I decided to hook my external CD burner to my pc.
When the laptop is on, the CD is well recognized from that source. But my problem now is that I can't find a way to boot the CD from the external CD drive (USB-Boot).
How do I do it? Or does anyone have a better solution for me to format my laptop given that the internal CD drive isn't working? (I've already tried in BIOS to get external devices as the first device to boot, doesn't work :-( )

Unfortunately dude... I have bad news for you.
The booting from the external USB CD/DVD drive is not possible. The BIOS don't support this functionality.
If you need to boot from the CD you will have to buy a new, compatible and supported internal CD/DVD drive.
Please note that not all slim line CD/DVD drives are supported due to the different master/slave/c-sel settings.
Usually the user manual should provide a information about supported CD/DVD drive.
If not, then ask the Toshiba authorized service provider for an compatible drive.
Best regards

External drive how to use DVD

Latest OS on MacBook Air. When I connect the external drive and I want to
watch an exercise DVD I have used before, I can't find the part of the DVD I want to watch.
Also, now when I want to eject the DVD from the drive, I cannot find this option under Finder.
So the DVD is now stuck in the external drive, and I can't use it at all.
Help!!!

Hello mebjk,
Thank you for using Apple Support Communities.
You don't mention if you are using the Apple SuperDrive with your MacBook Air, if so, the following article should help you with troubleshooting what might be going on.
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Regards,
Jeff D.

How to use the output types e-mail in script?and other output types

how to e -mail a script?and fax?

hi,
check the example
Just try by using the below code may be it will helpful to you.
REPORT Z_RMTIWARI_SEND_SPOOL_MAIL_ATT .
PARAMETERS : P_SPOOL TYPE TSP01-RQIDENT OBLIGATORY .
PARAMETERS : P_MAIL TYPE char100 OBLIGATORY .
TYPES : TY_LINE type string.
DATA: IT_ATTACHMENT TYPE soli OCCURS 0 WITH HEADER LINE.
DATA: IT_ATTACHMENT_LONG TYPE TY_LINE OCCURS 0 WITH HEADER LINE.
DATA: LV_PDF_SIZE type i.
DATA: LT_PDF type standard table of tline with header line.
PERFORM SEND_EMAIL USING P_SPOOL P_MAIL.
FORM send_email
--> X_SPOOL_ID
--> X_EMAIL
FORM send_email USING X_SPOOL_ID X_EMAIL.
DATA: LT_OBJPACK LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
LT_OBJHEAD LIKE solisti1 OCCURS 1 WITH HEADER LINE,
LT_OBJBIN LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_OBJTXT LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
LV_DOCUMENT_DATA TYPE sodocchgi1.
DATA: L_ATT_LINES TYPE i.
DATA : LV_SPOOL_DESC(68) type c.
CHECK NOT ( X_EMAIL IS INITIAL ).
CLEAR: LT_RECLIST, LT_RECLIST[],
LT_OBJHEAD, LT_OBJHEAD[],
LT_OBJTXT, LT_OBJTXT[],
LT_OBJBIN, LT_OBJBIN[],
LT_OBJPACK, LT_OBJPACK[].
CLEAR LV_DOCUMENT_DATA.
Read spool and get the pdf internal table and name of spool
PERFORM READ_SPOOL USING X_SPOOL_ID LV_SPOOL_DESC.
CHECK NOT ( LT_PDF[] IS INITIAL ).
Convert pdf itab to 255 line itab.
data :LV_COUNTER type i.
data :LV_FROM type i.
loop at LT_PDF.
translate LT_PDF using ' ~' .
concatenate IT_ATTACHMENT_LONG LT_PDF into it_attachment_long.
endloop.
translate IT_ATTACHMENT_LONG using '~ ' .
append IT_ATTACHMENT_LONG.
clear : LV_COUNTER.
DO.
LV_COUNTER = strlen( IT_ATTACHMENT_LONG ).
if LV_COUNTER ge 255.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(255).
append IT_ATTACHMENT.
SHIFT IT_ATTACHMENT_LONG by 255 places.
else.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(lv_counter).
append IT_ATTACHMENT.
exit.
endif.
ENDDO.
Body of email
MOVE 'Email sent to you from SAP' TO LT_OBJTXT.
APPEND LT_OBJTXT.
LV_DOCUMENT_DATA-obj_name = 'SpoolMail'.
Title of the email as spool name
LV_DOCUMENT_DATA-obj_descr = LV_SPOOL_DESC.
LV_DOCUMENT_DATA-sensitivty = 'O'.
LV_DOCUMENT_DATA-expiry_dat = SY-datum + 15.
LV_DOCUMENT_DATA-doc_size = STRLEN( LT_OBJTXT ).
e-mail body
CLEAR LT_OBJPACK.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 0.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = 1.
LT_OBJPACK-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
APPEND LT_OBJPACK.
For e-mail attachment
DESCRIBE TABLE IT_ATTACHMENT LINES L_ATT_LINES.
READ TABLE IT_ATTACHMENT INDEX L_ATT_LINES.
CLEAR LT_OBJPACK.
LT_OBJPACK-transf_bin = 'X'.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 1.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = L_ATT_LINES.
LT_OBJPACK-doc_type = 'PDF'.
LT_OBJPACK-obj_name = 'email'.
LT_OBJPACK-obj_descr = LV_SPOOL_DESC.
LT_OBJPACK-doc_size = ( 255 * ( L_ATT_LINES - 1 ) ) + STRLEN( IT_ATTACHMENT-line ).
APPEND LT_OBJPACK.
make recipient list
LT_RECLIST-receiver = X_EMAIL.
LT_RECLIST-rec_type = 'B'. "To external email id
APPEND LT_RECLIST.
send mail with attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = LV_DOCUMENT_DATA
put_in_outbox = 'X'
TABLES
packing_list = LT_OBJPACK
object_header = LT_OBJHEAD
contents_bin = IT_ATTACHMENT
contents_txt = LT_OBJTXT
receivers = LT_RECLIST
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
If SY-subrc = 0.
write:/ 'Message sent'.
else.
write:/ 'Error encountered'.
endif.
ENDFORM. " send_email
*& Form read_spool
FORM read_spool USING X_SPOOL_ID Y_SPOOL_DESC.
DATA : LV_SPOOL_TYPE TYPE TSP01-RQDOCTYPE.
SELECT SINGLE RQDOCTYPE RQTITLE
INTO (lv_spool_type, y_spool_desc)
FROM TSP01
WHERE RQIDENT eq X_SPOOL_ID.
IF Y_SPOOL_DESC IS INITIAL.
concatenate 'Spool-' X_SPOOL_ID into Y_SPOOL_DESC.
ENDIF.
IF LV_SPOOL_TYPE eq 'LIST'. " If spool is a list
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = X_SPOOL_ID
NO_DIALOG =
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = LV_PDF_SIZE
PDF_SPOOLID =
LIST_PAGECOUNT =
BTC_JOBNAME =
BTC_JOBCOUNT =
TABLES
PDF = LT_PDF
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE. " If spool is OTF
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = X_SPOOL_ID
NO_DIALOG =
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = LV_PDF_SIZE
PDF_SPOOLID =
OTF_PAGECOUNT =
BTC_JOBNAME =
BTC_JOBCOUNT =
TABLES
PDF = LT_PDF
EXCEPTIONS
ERR_NO_OTF_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DSTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " read_spool
http://www.sap-img.com/abap/sending-fax-from-abap.htm
http://www.sap-img.com/abap/sending-email-with-attachment.htm

How to Use DVD Output as a Device?

Similar Messages

Maybe you are looking for