How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

Similar Messages

HOW TO HIDE USERID PARAMETER, WHEN CALL REPORT FROM MENU USING FORM 10G

good morning colegas
i'm from panama
when i call a report from a oracle forms menu, its send a user, pass and bd in the url, i need to hide this parameter userid,
cuando llamo un reporte desde forms, se envia el usuario, pass y bd en el url nesesito ocultar estos parametros del url, le agradeceria si alguno tiene algun eejmplo q me de, de como ocultar estos parametros
i'm using oracle forms y report 10g
this is my msn [email protected]
slds desde panama

this document show us, only when i call a report from a forms, but not from a menu!
but to hide these parameters, i need to create a bean in a block a way and the menus do not allow me to create these objects
you done this before?
you have a example?
slds desde panama

How to get all parameter names along with their values in stored procedure which is being executed

Im using sql server 2012, is there any possible way to get all the parameters of a stored procedure along with the values passed to it.
I need these things to build a xml. I mean this should happen in the procedure which being executed and it should be common for all the procedures.
For example, let us suppose we have to procedures,
uspSave, @name='test' @age=20
uspDelete @id=2
now in uspSave procedure, i need to get @name, @age and the values 'test', 20 and in uspDelete, i should get @id with value 2.
For getting the column names, i tried this,
select parameter_name from information_schema.PARAMETERS where specific_name=OBJECT_NAME(@@procid)
now is it possible to loop through the result of above query and can we get the values.

I think you need running SQL Server Profiler to capture this info even in SQL Server 2012.
Best Regards,Uri Dimant SQL Server MVP,http://sqlblog.com/blogs/uri_dimant/
Blog : MS SQL Development and Optimization
Blog : Large
scale of database and cleansing

How to use a parameter of a report program in a dialog program

how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use a parameter in a report program in a dialog program

how to use a parameter in a report program in a dialog program

Hi Shaikh,
Post it in http://scn.sap.com/community/abap
"ABAP Development".
sree

Problems using Dynamic parameters with Crystal Reports and SBO 8.8

Has anyone been able to successfully use a dynamic parameter in Crystal Reports with 8.8 using the Business One connector? When we try we get an additional logon to the database that pops up and the logon fails.
We need this because we want to return live lists of PO documents from the server for selection. We are also trying to use nested dynamic parameters, because we want to first return the PO document based on the PO number, and then chose specific rows based on a field value in POR1.
It works if we don't use the Business One connector, but then the report doesn't function properly inside of SAP.
Any ideas would be appreciated.

I have tried using tokens but they are too simple. I need something like a subselect where you first select one value and then another that is a subset of those values. Apparently the tokens can't even use a "where" clause.
SAP dances around Dynamic parameters, but won't come out and say that they can't be used with the B1 connector. If that is the case then they should just say so and stop wasting our time. Apparently Crystal is not truely interfaced with B1, just sort of hanging out with it.
I don't really care other than I have to do this select, subselect. If someone has a way to do that with tokens I would love to hear it.
Thanks,
Roy

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

Failed to read parameter object using Dynamic Parameter

Hi All
In one of my report I am using dynamic parameter, I tried to publish the report in BOXI and got the following error:
"Failed to read data from report file C:DOCUME1...LOCALS1Temp~crw{u2026u2026..-u2026.-u2026.-u2026.-u2026u2026u2026u2026}.rpt. Reason: Failed to read parameter object"
but if I change that to static parameter I am able to publish it.
I am using Crystal Report 2008 Version: 12.1.0.892
Product Type: Full
BO Version: Product: 12.1.0 © 2008 Business Objects
I went thru many forums and came up with some settings while publishing but nothing worked out. And some mentioned about the service packs and fix pack issues. But I am not sure which should be installed in order to make this work for my versions.
Can anyone please suggest, what can be done to publlish a report with dynamic parameter?
Thanks
Sree

Hi Sharon,
I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
I am not sure what to do..can you please guide me ?
Regards,
Johnes

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to run the parameter form example report :pform_report.jsp

how to run the parameter form example report : pform_report.jsp ?
I got these error message:
Reports Error Page
Sat Oct 18 11:58:24 CST 2003
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
PI with the name 'xml' can occur only in the beginning of the document.'.
     at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
     at examples.tools._pform__report._jspService(_pform__report.java:79)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
     at java.lang.Thread.run(Thread.java:484)

repost !
please help!

APEX:How to put dynamic buttons in a Report.

Hello all,
I am creating one application in which i want two buttons in every record. I can't put it manually because it should change according to records in a table So Can anyone tell me how to put dynamic buttons in a report.
Thanks & Regards,
Jiten Pansara

Hi Jiten,
you cannot create buttons in the report, but you can always create link columns with some css class to show it as button.
So in the both link column report attributes you will have class="button1" and class="button2"
And in dynamic actions you need to bind the events based on your link column's jquery selector like:
.button1
.button2Thanks

How dose family sharing work when one person wants to use a gift card?

How dose family sharing work when one person wants to use a gift card?

kokogo,
Purchases made in the iTunes and App Stores will first attempt to use any store credit that exists on the purchaser's account. Barring sufficient credit, the family organizer's card will be used for the purchase.
First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Family purchases and payments
https://support.apple.com/en-us/HT201079
Sincerely,
Allen

How to create a stored procedure in a dynamic schema

Hi,
I want to create a stored procedure in a dynamic shcema (schema name will be known at run time). Can any one guide me on this.
I tried using define var1=schema1; and then in create or replace procedure &var1.porcName( ) but it is not working
Thanks

SQL> alter session set current_schema=<my schema>;
Now create the stored procedure. It will be created in the session's current schema.

Ssrs 2008 r2 report dataset call a stored procedure

I am modifying an existing SSRS 2008 r2 report. In a dataset that already exists within the ssrs 2008 r2 report I need execute
a stored procedure called StudentData and pass 3 parameter values to the stored procedure. The stored procedure will then return 5 values that are now needed for the modified ssrs report. My problem is I do not know how to have the dataset call the stored procedure
with the 3 parameter values and pass back the 5 different unique data values that I am looking for.
The basic dataset is the following:
SELECT SchoolNumber,
        SchoolName,
        StudentNumber,
from [Trans].[dbo].[Student]
order by SchoolNumber,
          SchoolName,
          StudentNumber
I basically want to pass the 3 parameters of SchoolNumber, SchoolName, and StudentNumber to the
stored procedure called StudentData from the data I obtain from the [Trans].[dbo].[Student]. The 3 parameter values will be obtained from the sql listed above.
The columns that I need from the stored procedure called StudentData will return the following data columns
that I need for the report: StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName.
Thus can you show me how to setup the sql to meet this requirement I have?

Hi wendy,
After testing the issue in my local environment, we can refer to the following steps to achieve your requirement:
Create three multiple parameters named SchoolNumber, SchoolName and StudentNumber in the report. Those available values from the basic dataset SchoolNumber, SchoolName and StudentNumber fields.
If you want to pass multiple values parameter to stored procedure, we should create a function as below to the database:
CREATE FUNCTION SplitParameterValues (@InputString NVARCHAR(max), @SplitChar VARCHAR(5))
RETURNS @ValuesList TABLE
param NVARCHAR(255)
AS
BEGIN
DECLARE @ListValue NVARCHAR(max)
SET @InputString = @InputString + @SplitChar
WHILE @InputString!= @SplitChar
BEGIN
SELECT @ListValue = SUBSTRING(@InputString , 1, (CHARINDEX(@SplitChar, @InputString)-1))
IF (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar))>(LEN(@InputString))
BEGIN
SET @InputString=@SplitChar
END
ELSE
BEGIN
SELECT @InputString = SUBSTRING(@InputString, (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar)) , LEN(@InputString)-(CHARINDEX(@SplitChar, @InputString)+ len(@SplitChar)-1) )
END
INSERT INTO @ValuesList VALUES( @ListValue)
END
RETURN
END
Use the query below to create a stored procedure, then use it to create a dataset to return 5 values:
create proc proc_test(@SchoolNumber nvarchar(50),@SchoolName nvarchar(50),@StudentNumber nvarchar(50))
as
begin
select StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName
from table7 where SchoolNumber in (SELECT * FROM SplitParameterValues (@SchoolNumber,',')) and SchoolName in(SELECT * FROM SplitParameterValues (@SchoolName,',')) and StudentNumber in (SELECT * FROM SplitParameterValues (@StudentNumber,','))
end
Right-click the new dataset to modify the parameter value in the Parameters pane as below:
=join(Parameters!SchoolNumber.Value,",")
=join(Parameters!SchoolName.Value,",")
=join(Parameters!StudentNumber.Value,",")
For more details about pass multi-value to stored procedure, please see:
http://munishbansal.wordpress.com/2008/12/29/passing-multi-value-parameter-in-stored-procedure-ssrs-report/
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How to use dynamic parameter when a report is created using Stored Procedures

Similar Messages

Maybe you are looking for