How to use Flat files as targets

The root path of location LOC_FLAT_TGT must be specified as one of the file paths for the UTL_FILE_DIR parameter in the init.ora for the runtime instance. The root path of location LOC_FLAT_TGT must be a file path on the server.
Thanks in Advance,
Jash

Hi,
This is basically saying, either use the value of UTL_FILE_DIR of the runtime instance while registering your Target File Location
OR
ask your DBAs to change the UTL_FILE_DIR to the directory path where you want to place your files..........
HTH
Mahesh

Similar Messages

How to use 'flat file extraction' option in Infospoke

Hello Gurus,
We are trying to extract the BW data using Infospoke to a 3rd party ETL tool (Datastage). Now in the current BW 3.5 release, the customer is on SP11 and we are not able to extract any data using a 3rd party system option in Infospoke. Due to the fact, we found out from SAP, that since we are getting an error (3rd party system is not set)in infospoke, we have to upgrade the SP level from 11 to either 16 or 17. The customer that we are dealing with is not going to do that until July - 2007.
So now we have a second option to load the 'flat file' in BW App. server and FTP to Datastage. Is this something workable option?
When using that option within Infospoke destination Tab, we can see two options. One is to use File option and load the data within the standard DIR HOME. I tried that but I can't see the file and the entire data within the standard directory. Can anyone explain why and what will be the procedure to follow?
The second option is to use Logical file. I never done that before. Can anyone explain step by step process or provide the detail document and/or link?
Since we are at the critical timeframe stage, I would appreciate if I can get the faster response from the Gurus.
I will make sure to give 'reward points' to each and every helpful answer(s).
thanks in advance,
Maulesh

Hi shashi,
first, let me clarify one thing here! I am not saying '3rd party tool' as an option in infospoke. I know Infospoke provides only two options (DB table, and file). But when you use DB table option, you check mark on 3rd party destination and that's where you define an RFC destination for 3rd party tool. So when you execute an infospoke, it will start extracting data and load into the defined destination. Since we are on SP11 on BW 3.5 release, we are getting an error while executing an Infospoke using 'DB table option'. The error is like '3rd party destination is not set'. When I went to Marketplace and found an OSS note, I found out that we need an upgrade on SP level (upto 17).
   As I mentioned earlier, the client doesn't want to upgrade until next year, and we are at the critical timeframe stage, where we have to make a decision whether we hold this project until the SP upgrade happens or found alternate approach where we can extract the data from BW (somehow) and load into Teradata database via Datastage - BW Pack (3rd party ETL).
   So we might be able to use the second option in Infospoke destination, which is to use 'Flat file' load.
   Now when I use File option with App. server checked, the data loads into default Server and directory on BW. Which is DIR_HOME. I can see those file extracted and loaded into that directory under the transaction AL11. But I can't see any data. Do you think I have to request for an increase in size limit? If I see all the data, how can I FTP from the BW server? Do I have to work with SAP Basis or create a UNIX script?
   When I use Logical file name, I guess I have to follow what you have described on your response, correct? Can i use an existing Logical path and file name? Do you have a 'How to' document on creating YEAR and PER FM? Is it possible that Basis can do this work for us? What happens after we assign a logical Path and logical file name into the destination tab on Infospoke? What is the use of logical file versus file? Overall, I am looking for a process from extracting the data from Infospoke using either file or logical file, all the way to load into 3rd party database.
looking forward for your response!
thanks,
Maulesh

How to Use Flat File As source in operation mapping?

Hi dont want to use an FCC. I have written an JAVA Mapping to convert a flat file to XML.
But in Interface Mapping How i can test this?

/*This java mapping will give same output as input payload */
package com.mapping;
import java.io.InputStream;
import java.io.OutputStream;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class Java_Mapping extends AbstractTransformation {
     public void transform(TransformationInput transformationInput,
               TransformationOutput transformationOutput)
               throws StreamTransformationException {
          try {
               InputStream inputstream = transformationInput.getInputPayload()
                         .getInputStream();
               OutputStream outputstream = transformationOutput.getOutputPayload()
                         .getOutputStream();
               byte[] b = new byte[inputstream.available()];
               inputstream.read(b);
               String strContent = new String(b);
               outputstream.write(strContent.getBytes());
          } catch (Exception exception) {
               exception.printStackTrace();
Edited by: Raghu Vamsee on Jan 5, 2011 3:46 PM

Quick question - how to use flat files OWB 10gR2

Sorry, really dumb question here. I'm using the OWB client on my windows machine, but the database is on a separate UNIX box.
The data file I'm trying to access is in
/usr/local/test
and the DBA's have created a directory object ("TEST") inside the database with read privs on that /usr/local/test directory.
Given all that, exactly what do I need to do to:
a) create the file location in OWB
b) "see" the flat file in it
When I try to set the directory up, it seems like the client is looking at my local drive instead of connecting to the Unix box?
Thx,
Scott

Indeed... if you use the Import metadata wizard, it will look for the flat files on your local machine, but this is only for you to define the layout of this file... when you actually read this file (in a process flow for example) the flat file must be on the server where your OWB repository is installed... notice that this is not necessarily the same server where your database is running.

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

How to load hierrarchies using dtp using flat file in bw ineed clear ste

how to load hierrarchies using dtp using flat file in bw ineed clear steps

Hi,
If you want to load InfoObjects in the form of hierarchies, you have to activate the indicator with hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the whole hierarchy or the hierarchy structure is to be time-dependent, whether the hierarchy can contain intervals, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
1.Defining the source system from which you want to load data:
Choose Source System Tree ® Root (Source System) ® Context menu (Right Mouse Button) ® Create.
For a flat file, choose: File System, Manual Metadata; Data via File Interface.
2.Defining the InfoSource for which you want to load data:
Optional: Choose InfoSource Tree ®Root (InfoSources) ® Context Menu (Right Mouse Button) ® Create Application Component.
Choose InfoSource Tree ® Your Application Component ® Context Menu (Right Mouse Button) ® Create InfoSource ® Direct Update
Choose an InfoObject from the proposal list, and specify a name and a description.
3.Assigning the source system to the InfoSource
Choose InfoSource tree ® Your Application Component ® One of your InfoSources ® Context Menu (Right Mouse Button) ® Assign Source System. You are taken automatically to the transfer structure maintenance.
The system automatically generates DataSources for the three different data types to which you can load data.
      Attributes
      Texts
      Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
4.Maintaining the transfer structure / transfer rules
Choose the DataSource to be able to upload hierarchies.
Idoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject, for which hierarchies are loaded. With this transfer method, during loading, the structure is converted to the structure of the PSA, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
5.Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR
The system transfers the settings for the intervals and for time-dependency from the InfoObject maintenance. Depending on which settings you have defined in the InfoObject maintenance, further table fields can be generated from the system.
The valid from and valid to field is filled if you select Total Hierarchy Time-dependent in the InfoObject maintenance. The time-dependent indicator is activated if you select the Hierarchy Nodes Time-dependent option in the InfoObject maintenance.
6.Save your entries.
Depending on which settings you defined in the InfoObject maintenance, additional fields can be generated from the system. Also note the detailed description for Structure of a Flat Hierarchy File for Loading via an IDoc and for Structure of a Flat Hierarchy File for Loading via a PSA.
Also find the below blog for your reference...
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
You can load hierarchy using process chain...
Find the below step by step procedure to load hierarchy using process chain...
http://help.sap.com/saphelp_nw70/helpdata/EN/3d/320e3d89195c59e10000000a114084/frameset.htm
Assign points if this helps u...
Regards,
KK.
Edited by: koundinya karanam on Apr 8, 2008 1:08 PM
Edited by: koundinya karanam on Apr 8, 2008 1:09 PM

Uregnt - How to Load Flat File into BW-BPS using Web Browser

Hello,
We have followed the 'How to Load Flat File into BW-BPS using Web Browser' guide to build BSP web front-end to upload flat file. Everything works great but we have a requirement to populate the Planning Area Variables based on BSP drop down list with values. Does anyone know how to do this? We have the BSP coded with drop down list all we need to do now is populate variables. We can populate the variables through the planning level (hardcoded) but we need to populate them through the web interface.
Thanks,
Gary

Hello Gary,
We have acheived the desired result by not too a clean method but it works for us.
What we have done is, we have the link to load file in a page where the variables can be input. The user would then have the option to choose the link to load a file for the layout in that page.
By entering the variable values in the page, we are able to read the variables for the file input directly in the load program.
Maybe this approach might help.
Sunil

Flat File as Target - MultiRecord Type

How do I write from Oracle into a Flat File as Target where the data in Flat file is a multirecord type. For ex. Sales Order header and Sales Order Line info.
I tried to do this by using a Joiner to the sales order header, line and items table and then mapping outgrp of joiner to the Flat file data with two record types in it. But when I generate and run this it could only create header records in out put file

Dear 396217,
As far as I am concerned you cannot really push out to a multi record structure without manual intervention.
There are a few things you can do: on the target (not sure whether that was already available in 9.0.3... but it definitely is in 9.0.4) you can set the flat file as a target to generate field names as headers. If that is what you want... then great.
The initial scenario: orders and order items in one model, is not supported. What you could do... is write a transformation to do this. Use calls to UTL_FILE to implement those and generate your own records. Primitive... but it works.
Alternatively, create 2 files and have a separate external process merge these. Not ideal; I realize that.
Mark.

How to use XSJS file path in Controller.js file

Hi Experts,
Regarding How to use XSJS file path in Controller.js file.
I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-services article.)
Seems to be there is no information about the same. May be the article is targetted for Beginners and above. As I am a learner I am not able to do the same.
var aUrl = '../../logic/demo_main.xsjs? (highlighted)
Suppose my XSJS file is at http://ipaddress:8000/newtest/Func.XSJS.
Can I use like below
var aUrl = 'http://ipaddress:8000/newtest/Func.xsjs?
or
var aUrl = '../../newtest/Func.xsjs?
I tried with multiple options but not able to get the expected output.
Can you please provide more details on this?

Dear Thomas,
I am a abap developer , recently we meet a problem on our webdynpro report performnace issue. As in the development, we use SALV_WD_TABLE to design a ALV. and verything work correctly in our DEV system.
But after when our QAS system, there are more records for the ALV, one of them has 21000 records. And in the layout, we have a column as checkbox.
If we click any one checkbox, then the layout will respond almost 1~2 minutes. With debug I found the most time cost in the standard program.
And with search I found that you have solution to solve it as 1,000,000 rows.
So is it possible to provide some idea or solution to us?
Many thanks for your help!
BR
Vincent Chen

How to use properties file

Hi,
I want to use properties file in my application. I have kept properties file inside a directory called properties which is inside myProject(which is the parent directory of my project) i.e "myProject/properties".
My java file where i want to call this properties file is inside the myProject/WEB-INF/src/java.
How can i call the properties file from myProject/WEB-INF/src/java/PropertyReader.java
I wrote java program in myProject/WEB-INF/src/java/PropertyReader.java like:::::
ResourceBundle resBun = ResourceBundle.getBundle("Test", Locale.getDefault()); // Test.properties is inside myProject/properties
resBun..getString("name");
After running the program i am getting the following errors:::::
Exception in thread "main" java.util.MissingResourceException: Can't find bundle for base name Test, locale en_US
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:836)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:805)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:576)
at PropertiesReader.main(PropertiesReader.java:4)
What is the issue? How to use properties file?
Waiting for reply.
Thanks

Still getting same exception. As you explained i tried like the below:::
1. I am using ant as build tool.
2. My properties file is for database configuration
My properties file is::
database.properties (inside myProject/properties)
JDBCDriver=org.gjt.mm.mysql.Driver
JDBCConnectionURL=jdbc:mysql://pmdbmysql:3306/bandwidthshaper?user=admin&password=admin
My java package structure is
WEB-INF/src/java
WEB-INF/src/classes
For build WEB-INF is the base directory and build.xml is inside the src directory
In my build.xml i wrote the following lines for compilation::
          <target name="compile" >
               <javac srcdir="src" destdir="src/classes" debug="true" debuglevel="lines,vars,source">
                    <classpath refid="class.path"/>
               </javac>
<copy todir = "src/classes" >
<fileset dir = "../properties" />
</copy>
               <jar jarfile="lib/${project.jar.file}" basedir="src/classes"/>
          </target>
I am copying properties file to the classes directory.
Now in java file which is inside /WEB-INF/src/java, I wrote::
try {
Properties programProps = new Properties();
InputStream is = getClass().getResourceAsStream("/database.properties");
if(is == null)
throw new IllegalStateException("Properties file missing ");
programProps.load(is);
System.out.println("driver name::::::: "+programProps.getProperty("JDBCDriver"));
is.close();
} catch(Exception e) {
e.printStackTrace();
After compilation in my classes directory i am getting database.properties file and my java file with package.
At the time of running i am getting "java.lang.IllegalStateException: Properties file missing"
Now tell me where is the fault. Why again i am getting exception.
Thanks

How to handle flat file dissembler in biz-talk from getting spited in to multiple files???

Hi,
How to handle flat file dissembler in biz-talk from getting spited into multiple files according to number of transaction sets???
where the Map flow is from Flat file to X12 Standard files.
Please advise...

You can go through following links:
Developing
Custom Pipeline Components
How
to Develop BizTalk Custom Pipeline Components - Part1
Custom
BizTalk Pipeline Disassembler Component
Creating
a custom BizTalk 2010 pipeline component–Part I
add one more which talks about extending the FFDASM @http://msdn.microsoft.com/en-us/library/ee267856(v=bts.10).aspx
Regards,
Rachit
Vote, if you find it useful.

How to load flat file in BPS through Web-debugging

Hi,
We are working on flat file upload in BPS thru guide 'How to load flat file in BPS through Web'. Can some one guide on how to debug the function modules used while uploading the data.
We have set up the break point in the function modules and also in the BSP page. But when trying to debug while uploading, it is not going to the break point which was set.
Could you assist in setting up the break point.
Regards,
Sreenath
Message was edited by:
sreenath reddy

Hi,
I have put an external break-point.
I have hard coded it in the coding of the function module itself.
The code is perfectly working. But, when I want to check for the values of the variables in the F.M during runtime, the break-point is not triggering. Any ideas??
Regards,

Flat file as targets in a mapping.

Hi All,
While reading on-line documentation in topic Define Mappings of oracle9i warehouse builder i came across following statement.
"A mapping can contain up to 50 flat files as targets, and it can also contain mix of flat files, relational objects and transformations."
Does this mean a flat file can be used as target in a mapping? I am in impression that only flat file can be used as source in a mapping.
Thanks in Advance.
Regards,
Vidyanand

Hi Igor,
Some update on this, I managed to find steps to include flat file as target in a mapping.
Steps followed were as follows.
1> Created a File Module.
2> Imported a Text File with headings and no records.
3> Created a Warehouse Module.
4> Imported scott.dept table into the module.
5> Created a mapping, mapped scott.dept table to the text file.
6> Selected Configure option in the mapping. Set parameters Thefilename = the above file name and Access Specification).
7> Validated & Generated map, it looks fine with no errors.
8> Deployed & run the package.Deployment didn't show any errors however while running displays error ORA-01403: no data found.
Please note that the utl_file_dir parameter is set on oracle server and the utl_file_dir is mapped in windows NT explorer from machine.
Does anyone knows more about this error?
Thanks in Advance.
Regards,
Vidyanand

Loading Hierarchies using flat file

Hi experts,
I have requirement to load hierarchies using flat file.
I have to create hier on Person Responsible, sub nodes are Sales Office, Project Definition, Project Type and Project Definition Description. I have file, i need to load into BW.
I dont know much about hier loading, can you tell me what are the Attributes to be inserted and how to prepare the hier loading file which contains HIENM, VERSION, HCLASS, DATEFROM and DATETO.
I dont know these fields are enough to load my hier.
I have created one hier, when i try to activate it's giving error like ' no data exists'.
Can anyone tell me how to prepare file to load into hierarchy?
Thanks in advance,
Venky

Hi Venkatesh,
There are several formats to load a hierarchy via file. The following two are the commonly used formats.
1) Default
Node ID                     NODEID
InfoObject Name     INFOOBJECT
Node Name     NODENAME
Link Name     LINK
HghrLvlNode     PARENTID
Language Key     LANGU
Description - Short     TXTSH
Description - Medium     TXTMD
Description - Long     TXTLG
2) Sorted
Node ID                     NODEID
InfoObject Name     INFOOBJECT
Node Name     NODENAME
Link Name     LINK
HghrLvlNode     PARENTID
First Subnode     CHILDID
Next Node Along     NEXTID
Language Key     LANGU
Description - Short     TXTSH
Description - Medium     TXTMD
Description - Long     TXTLG
If Default format is used, the sequence of node IDs appeared in the flat file determines the structure of the hierarchy. Whereas the sorted hierarchy format defines the structure via PARENTID, CHILDID, NEXTID relationship.
You make the selection in DataSource/Tran.Structure tab of InfoSource Page by clicking on the "Hier. Structure button.
Good luck!
Bill

How to read flat file and convert to xml throught OSB

Hi ,
Can somebody help how to read flat file and convert to xml in OSB.
appreciate ur help.
Thanks & Regards ,
Siva K Divi

if you're using the oepe with osb plugin (will be installed when you install the osb locally) and then in your osb project > rightmouseclick > new > MFL.
that's it
maybe you're trying to create it within an oepe installation which doesnt have the osb plugin ?

How to use Flat files as targets

Similar Messages

Maybe you are looking for