How to use IMAQ Bayer To RGB ?

Hello everybody.
Could you please tell how to use IMAQ Bayer To RGB. I read from help that we need Bayer Parameters. But in help haven't structure of Bayer Parameters. I find any example of IMAQ Bayer To RGB and Bayer Parameters in Labview
Thank you for reading my poor english and help me !
Solved!
Go to Solution.

Hello,
What kind of camera bus are you using? (Camera Link, GigE, FireWire, etc.)  When you acquire an image in MAX does it appear to have the bayer grid?  Have you tried adjusting the bayer color of the camera in MAX?
There are two examples shipped with Vision Acquisition Software that show how to perform Bayer decoding one for NI-IMAQ and the other for NI-IMAQdx.  If you open up LabVIEW's example finder by going to Help >> Find Examples  you can search for Grab With Bayer Decoding.vi or Grab and Bayer Decoding.vi.
Regards,
Isaac S.
Applications Engineer
National Instruments

Similar Messages

  • How to use IMAQ extract color panel in a LabView file?

    I want to change a color image into a greyscale image. Therefore I want to use the function IMAQ extract color panels but I don't know how to insert it in my LabView application.
    Please, can anyone give me some advice ?!!!
    Thx, Birgit

    Birgit,
    If you want all of the color planes, you can use IMAQ ExtractColorPlanes. Allocate an 8-bit image for each of the color planes. Wire the original color image and each of the 8-bit images for the color planes on the left and bottom of the vi. The outputs on the right side will be the same images, and they will each contain the desired color plane. The input at the top of the vi controls which color planes are extracted (RGB, HSI, etc.) Grayscale will probably be the I plane in HSI.
    If you just want a grayscale image, use IMAQ ExtractSingleColorPlane instead. Wire the color image to Image Src, and wire an 8-bit image to Image Dest. Select the color plane using the top input, and it will come out on the right side.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • How to use IMAQ to read out custom information in .tiff file?

    Currently, our lab use AFM to scan sample surface. The result was saved as .tiff file.
    Here are lots of information stored in the .tiff file, such as scan range, tip offset...
    But when I try to use IMAQ to load such .tiff file. I just get the image, and some information such as x resolution, y resolution, calibration.
    Is there some way to use IMAQ tool to extract all the information I need from .tiff file?
    Thanks a lot!

    I tried to use read text file vi. But what I get is some meaningless characters. Just like this.
    II* Ô   ô                                                                                 ¥ÂZEÃÒZE    ª}gDó» ‘N‘>test3                                   Mesuared by JSPM-5200                                                                                                                                                                                                                                            ?  Ù Ù :/  
    !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ ¡¢£¤¥¦§¨©ª«¬­®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ                       ÿÿÿÿ                    «ÊDÚ¢I@                {.A                   ?    @  ºB   @ PCG PCG  €?           €?jè@  €? øâE              SPM                                                                                                                                                                                                                                                                         ý?F                                                                                                    ÿÿÿÿ  ÿ ÿÿUÿþ    þ  þ þ 𪠠   
    "$&(*,.02468:<>@BDFHJLNPRTVXZ\^`bdfhjlnprtvxz|~€‚„†ˆŠŒŽ’”–˜šœž ¢¤¦¨ª¬®°²´¶¸º¼¾ÀÂÄÆÈÊÌÎÐÒÔÖØÚÜÞàâäæèêìîðòôöøúüþ )19AJRZbjs{ƒ‹”œ¤¬´½ÅÍÕÞæîöÿ )19AJRZbjs{ƒ‹”œ¤¬´½ÅÍÕÞæîöÿ                               ªÿ ÿU ÿ ÿÿ ªÿÿ þþ  þ þ`  þðªŒþþ  
    "$&(*,.02468:<>@BDFHJLNPRTVXZ\^`bdfhjlnprtvxz|~€‚„†ˆŠŒŽ’”–˜šœž ¢¤¦¨ª¬®°²´¶¸º¼¾ÀÂÄÆÈÊÌÎÐÒÔÖØÚÜÞàâäæèêìîðòôöøúüþ )19AJRZbjs{ƒ‹”œ¤¬´½ÅÍÕÞæîöÿ                                                              ª ÿ ÿª  ÿ ÿÿUªÿ  þªPþ  þþþðª þþ  
    Why is that ?

  • How to use "IMAQ ComplexPlaneToImage"? (Display after "IMAQ FFT")

    Hello,I use two ways to display a image after "IMAQ FFT":
    (1). Input a image->IMAQ FFT->Windraw(display);
    (2). Input a image->IMAQ FFT->IMAQ ComplexPlaneToImage(extracting magnitude) ->Winddraw(display).
    The two results are much different.
    I want to know what the two displayed images(especially in the second way) mean and where
    "IMAQ ComplexPlaneToImage" usually used.
    Thanks for your help!

    Hi Dan
    I am having some questions regarding the FFT Phase of the FFT with IMAQ ComplexPlaneToImage.
    From the posting below you mention that the phase is:
    Phase = Real/Magnitude.
    I am using the function ComplexPlaneToArray to see the value I am getting from ComplexPlaneToImage.
    Usually the phase is the inverse tangent  (Imaginary/Real). If we are using the Real and magnitude it will be the inverse cos(Real/Magnitude)
    I tried the above senario to verify the phase value we are getting from ComplexPlaneToArray.
    However, I get not get the value you are displaying in the phase  (ComplexPlaneToArray).
    How can I verify  ComplexPaneToArray ( phase) with the various
    ComplexPaneToArray(real)
    ComplexPaneToArray(magnitude)
    ComplexPlaneToArray(imaginary)
    I attached a phase fft.vi as an example of my issue.
    Regards,
    Corinne
    Attachments:
    phase fft.vi ‏153 KB

  • How to use color picker or RGB values in the hue-saturation colorize adjustment

    I have a monochromatic adornment that I want to match to the color of a logo.  I am attempting to use the colorize option of a hue saturation adjustment layer to match color.  But I cannot quite get the colors to match.  I know the RGB values of the color, but how do these translate into the Hue/Sat/Lightness numbers of the adjustment dialog?  I tried using the correlating H/S/B values fro9m the color picker but that did not work.
    Any suggestions?

    Thanks Zeno.  Creating a layer with the color and using the blend mode worked fine.  But as I stated in the original post, using the H/S/B (there is no HSL) values from the color picker does not work when you place them into the H/S/L values in the hue-adjustment layer with (or without) the colorize box checked.  But your first suggestion worked like a charm.  Thank you.

  • Who can tell me how to use ni-imaq functions imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?

    Who can tell me how to use ni-imaq functions imgSessionSerialFlash,imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?
    My camera is duncantech ms3100 and the frame grabber is pci-1428.I use ni-imaq2.6.When I use these functions,it tell me error -1074397163(IMG_ERR_BINT:Bad interface) .

    I have the same problem on my IPAD 2. One calender that i cant delete or find any settings for... Its just in the calender app under diffrent calenders.  how do i delete it?

  • How can I define a non-rectangular (eg. circular) ROI for pattern matching using IMAQ?

    I would like to create regions of interest that are not rectangular using IMAQ Vision Builder. Including polygons, circles, etc. I am using version 5.0.
    Thank you.

    Hello,
    The current pattern matching algorithm requires a rectangular ROI. See the IMAQ Vision Concepts manual for detailed info on how the algorithm works.
    Regards,
    Yusuf C.
    Applications Engineering
    National Instruments

  • How to use the IMAQ rval = imgGrab(SESSION_ID sid, void** bufAddr, uInt32 syncOnVB)function?

    How to use the IMAQ rval = imgGrab(SESSION_ID sid, void** bufAddr, uInt32 syncOnVB)function?
    Please explain the format of "bufAddr" variable?
    And how to convert this data to *.bmp format?

    Hi arm2arm;
    First, are you sure the function prototype says that the variable "bufAddr" is a handle? In the documentation the function prototype looks like:
    imgGrab(SESSION_ID sid, void* bufAddr, uInt32 syncOnVB)
    Declare a variable as:
    Int8* bufAddr = NULL;
    When set to NULL, IMAQ will allocate the necessary memory. Then, when using the function, just cast the variable as void.
    Use the function imgSessionSaveBufferEx() to save the image as a .bmp file.
    Regards;
    Enrique
    www.vartortech.com

  • How to use the examples in IMAQ Vision Builder?

    I tried many times to use the examples brought in IMAQ Vision Builder(or LabView 6i ?) or download the similar examples from website of NI in order to learn some skills(I am really new with it!). But Whenever I click the example I want to run and a new dialog window always opened and ask me to find a VI named ???(??? is like for emample: IMAQ Windraw) and I always failed to find this VI!!! Where are this VI or How to use those emamples??? Thank you advanced!!!
    Swedlin
    [email protected]

    Hello Swedlin,
    IMAQ WindDraw is a VI that is included in the IMAQ Vision toolkit (see http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=1305 for ordering information).
    If you are tring to run examples that include IMAQ WindDraw (or any other functions that are in IMAQ Vision), a dialog message will prompt you locate the VI manually (because the initial search failed).
    - Installing IMAQ Vision for LabVIEW will remove the message, and the examples will run.

  • How to reverse an image acquired using IMAQ APIs in vc++

    how to reverse an image acquired using IMAQ APIs in vc++

    When using imaqFlip, may the source and destination be the same Image* ?
    TIA!
    Jesse

  • IMAQ CROSS VALIDATION​- how to use?

    Hi All,
    I want to cross validate my train data set using IMAQ cross validate. 
    However I am unable to figure out how to use it? I searched up HELP and example. Couldnt find any example.
    I understand that I need to mention the number of k-folds needed for the cross validation. However how do I define the model and kernel parameters, in the first place, which will validate the model? 
    Can you point me to the right direction?
    Regards
    Aveo 

    Hi Sandeep,
    I agree that it is a rather strange requirement. Yet, it does not meet the criteria you pointed out. First, we cannot use the cross validation rules of the Accounting Flex because this personalization has a completely new entity, in a custom table. For each type of this new entity, the user will setup which accounts are shown. Meaning that after all core validation (Cross validation, flex field sec rules etc) the custom program, based on the new Entity type, must narrow the search even more. I cannot change the core Value sets or the validation, because this validation is to be used only with our extension; all other Account List of Values must behave the same as they do today.
    We have tried to convince the user with these arguments, that a change on the KFF Logic could have side effects and that we could validate it after the return from the list of values, so it would be an external treatment and would not tinker with the lov. We are still trying to do it but i just want to have an option in case the user "desperately needs" this feature.
    But thanks anyway, this gives me another argument to ask the user to reconsider.
    Regards!
    Thiago

  • Problem using IMAQ Array to Color Image vi

    I am doing some pixel manipulation & while going from an image to an Image Pixels (U64) array using IMAQ Color Image to Array VI I cannot see the image once it is modified.
    I am...
    1) converting the image to the 64 bit pixel data using IMAQ ColorImage to Array.vi
    2) doing the manipulation
    3) converting back to an image using the IMAQ Array to ColorImage.vi using the 64 bit input.
    What I get is...
    1) a black image with data behind it... meaning... if I take the magnifier tool and go to the approximate locations of my image where I expect to find the manipulated data, it is there.
    2) cast that image to a 32 bit image & still get a black image for the output.  The data however is no longer there and appears to have been stripped.  
    3) no error's out of any VI's...
    TIA  

    With Vision 2009 situation is not better.
    It happened because U64 image displayed in full scale. So, if you have full range of intensities (from 0 to 65535), then you can see something. But if your intensities in small range, for example, 0...255 in all channels, then you will see black image.
    Feel differences:
    It should be possible to map U16 values into U8 display range  with given range (like IMAQ WindDisplay Mapping does), but right now this feature available for I16 images only, not for U64. What you can do is following - map each channel to U8 (with linear LUT, for example), put channels together, then display 32 bit RGB instead of U64.
    Andrey.

  • Where to locate and how to use the filter thershould to binarized image

    Good morning friends. I am using
    Labview with VDM and let me know where to locate and how to use the
    filter thershould. Also that parameters used to binarized image captured
    via webcam and display it in black and white.
    Thank you very
    much.

    Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

  • How can I reduce the image size (how to use "Steps X, Y" and "ROI")?

    I upgraded Labview (and NI-DAQ) from 5.X to 7 Express (and NI-DAQ 7). That seems to make PCI_IMAQ1411 to malfunction. I could move ROI and reduce the size by changing "ROI and Step X and Y" of NI_Snap.vi. All of a sudden, IMAQ started not to work properly even under the same code and device. Only difference is LabView and NI-DAQ version. Could you help me working IMAQ1411 under the upgraded LabVIEW and NI-DAQ?
    Thanks, Grace

    Dear Dcoutri
    Thank you for your reply.
    (1) The version I have on my computer is IMAQ 2.5.7 which has been installed together with NI-DAQ 7 when I install the LabView Express 7. It is strange that I cannot find the version on "DownLoad site".
    (2) You said that Imaq 3.0 does not support Step X, Y function. So you recommend that Imaq 2.5.5 is rather proper one. Then how about Imaq 2.6.1 (2.6). Does that support Step X, Y function?
    (3) Using Imaq 3.0, how can one scale down an image?
    Thanks, Hyun

  • Using IMAQ Cast Image to convert 16 bit to 8 bit image.

    I am trying to convert a 16 bit image to a bit image, and I am using IMAQ Cast Image. I am wondering what I am supposed to wire into the # of shifts? When I use NI Vision Assistant it asks I can convert by the adjust dynamic method. Does anyone know how to do this with IMAQ Cast Image? Thank you in advance.

    The number of shifts is the number of bits that will be chopped (in the dark regions) from the initial image to fit into 8 bits.
    For instance, if you have a 10 bit image, compressing into an 8 bit image will obviously introduce some losses. You can decide to loose information either in the "whithe" parts or in the "black" parts of the image.
    With #shifts = 0, the two most significant bits will be lost, so the whitest parts of the image will be uniformely white, but the darl grey levels will be preserved.
    With #shifts = 2, the two least significant bits will be lost, preversing the whitest parts grey variations, but losing the subtilities in the darkest parts.
    With #shifts = 1, a single bit is lost on either sides...
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

Maybe you are looking for