How to use message queue for inegrating third party with EBS

Hi Experts,
We would like to integrate a third party system with EBS using message queues.
Where we will subscribe to a businnes event and which will populate the messages to messages queue.
But how can we deque this message in third party systems. We are in R12.1.3 and no FMW installed.
Any adapater or something is availabe, If so please throw some inputs.
Thanks
Bhaart

Please go to the link
http://developer.novell.com/extend/composer/1006.html
and also see the "message filtering" section.
Where you can find
Exposing message selection hints in the header portion of a message is a common tactic when multiple receiving apps are pointed at the same queue. The application that is best suited to handling a given message type can harvest just the messages it needs, while other applications can act on messages better suited for them. Administratively, it is more efficient to set up one queue (with multiple receivers accessing it) than to set up multiple queues, each with a dedicated receiver. My question is how can I achieve this Via progamatically ?

Similar Messages

How to use same DFF for two different forms with :BLOCK.field reference

Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

How to improve the performance for integrating third party search engine

hi,
I have been working on integrating verity search engine with KM. the performance for retrieving search result totally depend on how many search result returned, for example if there is less than 10 records, it only takes 3 seconds, but if there are 200 records, it takes about 3 minutes, is it normal? anyway to improve it? Thanks!
T.J.

Thilo,
thanks for the response, would you recommend some document for configuring KM cache service, I did change memory cache, and also dynamic web reposity, whatelse out there that I can change? right now, I have one instance(EP6.4 sp11) works well, it returns 200 records from Stellent within 6s. But when I put this KM global service on EP6.0 sp2 (our current system) it takes about 15s. I am not sure is this because of different EP version, or something else. I have tried my best to slim down SOAP component from Stellent. I don't think anything else can be done from that side anymore. before I changed the SOAP, it tooks about 60s. just wonder what else I can do on KM side to improve it performance? Thanks!
T.J.

Can any one suggest me how to use drawPixels method for 40 series devices

Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .

If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry.

Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples.
I was wondering, what's going on here. When checking queues using Get-Queue cmdlet it doesn't show more than couple of messages in the queue.
How do I get this fixed? This seems to be a known issue from thread http://social.technet.microsoft.com/Forums/en-US/ac121f02-4359-4d18-b86a-9c9c78b320a9/perfmon-messages-queued-for-delivery-2147483764?forum=exchange2010
Any assistance would be greatly appreciated.

Hi ChaituNanl,
Thank you for your question.
By our search, I suggest we update Exchange to Exchange 2010 CU6 or later, because problem also seem to appear to Exchange CU5 or former.
We could download the CU by the following link:
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
Notice: please note the version of Exchange Service Pack
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

How to use messages in WebDynpro-ABAP

Hi,
How to use messages in WebDynpro-ABAP.
Does it has any class to manage messages like IWDMessageManager or we can just use standard SAP Message types.. like E,W,X,I,S..
I hope it have a message container to display messages.
Thank U for Ur time.
Cheers,
Sam

Hi Sam,
U can hard code the message or u can use the Assistance class's text elements to store the messages.
1) Code to display hard coded message:
report message
CALL METHOD l_message_manager->report_attribute_error_message
EXPORTING
message_text = "Enter the correct Connection ID"
element = elem_flightinfo
attribute_name = 'CONNID'.
2) Code to display message from text element of assistance class:
lv_text = wd_assist->if_wd_component_assistance~get_text( key = '002' ).
report message
CALL METHOD l_message_manager->report_attribute_error_message
EXPORTING
message_text = lv_text
element = elem_flightinfo
attribute_name = 'CONNID'.
Where Message "Enter the Correct Connection ID" is stored in Text Element with key '002'
Hope this helps,

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

How to use a dictionary for multi languages when displaying mess

how to use a dictionary for multi languages when displaying messages??

1st you have to define new messages in the dictionary:-
1.     We have to open the application.
2.     Functional administrator responsibility.
3.     Core services.
4.     Messages.
•     Create message button.
•     Now fill the name of the message that we want to call it from our code in the Code field.
•     Fill the application name with short name of the application.
•     Choose the language.
•     Set the text you want to be displayed.
2nd, Now in the CO in the in the process form request you will code throw new OAException ("application short name","Code").
Now run and see the result.
3rd we want to use Arabic messages, use the same one you have created for saving as an example but you choose duplicate and set the language Arabic.
•     Run the page.
•     Choose preferences.
•     Current Session language = Arabic.
Now you can see the result.

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

Hello ! pls give some ti[ps how to use bapi's for data uploading?

hello !
pls give some ti[ps how to use bapi's for data uploading?
regards,
Arjun

Hi,
See the below report extract:
where it_data is having uploaded data.
LOOP AT it_data INTO wa_data.
 line_count = sy-tabix.
 "Date Validation
 CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
 INTO wa_data-uplft_date.
 "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
 LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
 IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
 MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
 APPEND wa_ekko TO it_ekko.
 ENDIF.
 ENDLOOP.
 "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
 LOOP AT it_ekko INTO wa_ekko.
 wa_data_header-pstng_date = wa_data-uplft_date.
 wa_data_header-doc_date = sy-datum.
 wa_data_header-bill_of_lading = wa_data-bill_of_lad.
 wa_data_header-ref_doc_no = wa_data-del_no.
 CONCATENATE wa_data-header_text1 '-'
 wa_data-header_text2 '-'
 wa_data-header_text3 '-'
 wa_data-header_text4
 into wa_data_header-HEADER_TXT.
 IF wa_data-indicator = 'Y'.
 wa_data_item-material = '000000000000200568'.
 ELSE.
 wa_data_item-material = '000000000000200566'.
 ENDIF.
 LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
 "Collect Item Level Data
 wa_data_item-plant = '1000'.
 wa_data_item-stge_loc = '1001'.
 wa_data_item-move_type = '101'.
 wa_data_item-vendor = wa_data-vendor.
 wa_data-qnty = wa_data-qnty / 1000.
 wa_data_item-entry_qnt = wa_data-qnty.
 wa_data_item-po_pr_qnt = wa_data-qnty.
 wa_data_item-entry_uom = 'KL'.
 wa_data_item-entry_uom_iso = 'KL'.
 wa_data_item-orderpr_un = 'KL'.
 wa_data_item-orderpr_un_iso = 'KL'.
 wa_data_item-no_more_gr = 'X'.
 wa_data_item-po_number = wa_ekpo-ebeln.
 wa_data_item-po_item = wa_ekpo-ebelp.
 wa_data_item-unload_pt = wa_data-unload_pt.
 wa_data_item-mvt_ind = 'B'.
 APPEND wa_data_item TO it_data_item.
 CLEAR wa_data_item.
 ENDLOOP.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = 'X'
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 READ TABLE return INTO wa_return WITH KEY type = 'S'.
 IF sy-subrc <> 0.
 DESCRIBE TABLE return LINES sy-tfill.
 IF sy-tfill = 0.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = ' '
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT = 'X'
 IMPORTING
 RETURN =
 ENDIF.
 ENDIF.
 LOOP AT return INTO wa_return.
 WRITE: 'Messsage TYPE ', wa_return-type,
 /,'ID ', wa_return-id,
 /, 'Number ', wa_return-number,
 /, 'Message ', wa_return-message,
 /, 'Long Text ', wa_return-message_v1,
 wa_return-message_v2,
 wa_return-message_v3,
 wa_return-message_v4,
 /, 'Failed at line', line_count.
 ENDLOOP.
 CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
 ENDLOOP.
Reward if useful!

How to use Flash Builder for Eclipse Luna ( is it possible??)

How to use Flash Builder for Eclipse Luna ( is it possible??)

Yes. I have Flash Builder 4.6 and 4.7 running in different Eclipse Luna installs.
More details at http://forums.adobe.com/message/4527443
On Mac, I had to have the 32bit version of Luna for 4.6, and the 64bit version of Luna for 4.7 (and I recently started using 4.7 with Eclipse Mars).
For 4.6 you need to first download Eclipse 3.6 and install the Flash Builder 4.6 plugin to that Eclipse install. For 4.7 you need to download Eclipse 3.7 and install the plugin to that Eclipse install. Once it's installed in the 3.x version, you can then copy the fb*.link files from the Eclipse 3.x dropins folders into your Eclipse Luna's dropin folder.
There is an issue where something in Flash Builder 4.7 won't work right when using it as a plugin, not sure but it might be something with building ANEs.

How to use messaging

where can i find instructions on how to use Messaging, its not in the iPad User Guide? thanks

Silly question but the manual does not tell you how to determine the user id of another io5 user...doesn't seem to like mobile phone numbers...so how do I know what id to pick or setup for messaging?

Is it possible for a third party to be added to an esatblished text message thread?

Is it possible for a third party to be added to a text message thread (between 2 people). This test message thread has been established for over a year! He says he could see our message history via his icloud. Is this possible? Please help.....

How "third party" are we talking about here.....? Not another user (usually family) who has access to the same Apple Id, is it? I know, that seems too obvious.....
Could you explain the situation a little more? Did you or the other party forward your iMessage ("text" between "i" devices/Mac users) to this 3rd party? How did this 3rd party end up with any portion of your conversation (or is that the question)? I know it is easy to forward a portion of your conversation to another user. When you choose to forward a "text bubble", you receive round check boxes next to all messages in the conversation; you just pick and choose how much you want the 3rd party to receive. Other than that method, I know of no way to loop in a 3rd party to an existing conversation via iPhone or iPad.
Anyone else?
Best of luck,
Bill

How to use Nokia mail for exchange

How to use Nokia mail for exchange for N82 so that it can push mails for gmail,yahoo.

It appears that what you are looking to do is from another product at Nokia called Nokia Messaging. Go to mail.nokia.com and setup a messaging account and add the gmail and yahoo accounts there. Then SMS send the configuration program to your device. Install it. it will add all the accounts to your device on install and will send messages to your device. So at this point you will have Mail for Exchange for you corporate mail and Nokia Messaging for you personal mail ( gmail and yahoo).

PerfMon - Messages Queued for Delivery = 2,147,483,764

Environment - Exchange 2010, DAG 2 X Server 2008 R2.
Hi there, we have noticed that a monitor is reporting there are 2,147,483,764 messages queued for delivery when running this powershell command: get-wmiobject -query "select MessagesQueuedForDelivery from Win32_PerfFormattedData_MSExchangeTransportQueues_MSExchangeTransportQueues"
The value returned by this also matches what we see in the PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery. the number does not increment as messages are sent, in fact it's only showing 2 more today than it was yesterday.
We are wondering just whats going on here, when checking queues in the GUI there are only a couple of messages showing up.
Is this counter just broken? If so how could we fix it?
Thanks for any assistance, regards Peter.

Hi,
According to your description, it seems that the value is the total number of messages that were queued for delivery since server started.
I recommend you refer to the following article:
http://pic.dhe.ibm.com/infocenter/tivihelp/v30r1/index.jsp?topic=%2Fcom.ibm.itmmc.doc%2Fmain_xc85.htm
Messages Queued For Delivery
The number of messages queued to be delivered when sample was taken. The value
format is a 4-byte integer.
Messages Queued For Delivery/sec The rate messages are queued for delivery since the server
was started per second. The value format is a decimal.
Messages Queued For Delivery Total
The total number of messages that were queued for delivery since
server started. The value format is a 4-byte integer.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

How to use message queue for inegrating third party with EBS

Similar Messages

Maybe you are looking for