How to use objects as a message type in WSDL?
How can I use object as a type for the message in WSDL?
For example, I want to achieve something like this:
<message name="DBConnection">
<part name="conn" type="???"/>
</message>
In the above example, for any operation getConnection(), the return type would be an object of the type Connection.
Any suggestions ?
Thanks,
Dhaval
Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks
Similar Messages
-
How to populate the RFC .Exception Message Type?
Hi All,
I am invoking an RFC synchronously from PI.
I am using the RFC.Exception message type to capture the exception raised from the RFC.
In the RFC, I have created a Non-class based exceptino anf raising it using the "Raise" command.
But it is only pupulating "Name" and "Text" of the Exception message. All other fileds are blank.
Is their a special way to raise the excpetion in rfc so as to populate the Exceptoin message type in PI completely?
thanks,
PiyushBut it is only pupulating "Name" and "Text" of the Exception message. All other fileds are blank.
Did you follow the steps as mentioned in this blog: /people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
Regards,
Abhishek. -
How to use clob or blob data type in OWB
how to use clob or blob data type in OWB?
if OWB not surport these data type,how can i extract the large data type from data sourceThe same question was asked just two days ago No Data Found: ORA-22992
Nikolai Rochnik -
How to control ME9F printout at Message type level
Hi MM Consultants
I have the following issue with my client. We have defined 2 message types related to Purchase Order printout .
through 1 message type we can see price in printout and through 2nd we can't . We need to define authorizations, so that certain users can output certain message types and others not. but apparently there is no authorization objects related to message types.
please help me to acheive the same ,
Regards
anubhavHi,
Create a custom transaction for PO Print & make the necessary changes as per your requirement In the custom program which you attach to the custom transaction you can put a validation to display the price based on user ID or some other parameters.
Thanks & Regards, -
Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification
Pratik,
Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
An emergency workorder is created in SAP and assigned to the technician.
The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
If you are looking to do something else with GCM that would be outside of Agentry.
--Bill -
Regarding mandatory fields, Context Objects and Fault Message Types
Hi All,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
2) What is the purpose of Context Object and in which situation we will use this.
3) What is the purpose of Fault Message Types and in which situation we will use this.
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
Kindly look into the above points and respond point by point.
Thanks in advance.
Regards,
Prem.SHi prem,
<b>1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.</b>
give occurence 1..unbounded. for the field name.
<b>2) What is the purpose of Context Object and in which situation we will use this.</b>
If u have multiple receiver system then to determine the reciever u can use context object.....
the alternative of context objetc is X-Path...
Check out these
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Here is a scenario where context objects were used for BPM
Technical Context Object in ccBPM
Get the details here:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
Technical Context Objects :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
A list of the Technical Context Objects names can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
Difference between context object and x-path:
diff between context object and x path
<b>3) What is the purpose of Fault Message Types and in which situation we will use this</b>
whenever u want to catch some exception u can use fault message types.Just for a example u r sending some data to SAP system.But due to some reason the R/3 system is down.so in this case if u have implemented fault message ..u can get a error message specifying r/3 is down....
Fault message implementation.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
How to Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
<b>4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.</b>
there are two transport protocol for File adapter
1)FTP(File transfer protocol)
to know abt FTP check here
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/content.htm
2)NFS(Network File System)
in server :Enter the host name or IP address of the FTP server.
in PORT:Specify the port number of the FTP server.
The default is the standard port for the FTP server (21)
check here
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
BILL
<b>***reward with points if ity helps u!!</b> -
How to restrist access for a message type
how do we insert A-HQ, HS-Z , 0-9 in the Message type (EDI_MES) for the auth object S_IDOCMONI, here we are just excluding all the values that start with HR. This will not give the users access to HR messages
Hi renjy,
S_IDOCMONI has the following fields:
ACTVT Activity
EDI_DIR Direction for IDoc
EDI_MES Message Type
EDI_PRN Partner number
EDI_PRT Partner Type
EDI_TCD Transaction Code
The values entered in EDI_MES are permitted message types. So just use the following combination to restrict the user from displaying HR message types.
EDI_MES----> A* to HQ, HS to Z, 0 to 9*.
To do this:
PFCG->Enter into the role>Open Authorizations>Search for object S_IDOCMONI -> Open the field EDI_MES-> Enter the range mentioned above-------> Save and generate.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh -
How do I execute IDOC for message type LOIPRO
How is it possible to execute IDOC using message type LOIPRO which I have configured with change pointers? Change pointers are using object ORDER.
I am looking to only generate IDOC for production order changes / updates that meets the criteria set by the change pointers. If something in the order changes, but that field is not being looked at by change pointers, I don't need IDOC to pick up that order.
I don't want to have to run RCCLTRAN or RCCLORD on a scheduled job. Only need to have activity if change pointers are activated. Am I going down the wrong road using LOIPRO ?Hi Bob,
Could you please guide me through the process of creating/triggering a change pointer based LOIPRO? Your help much appreciated.
Tabraiz -
How to use Object Class:orclDbServer in OID
Not sure if i have posted in the correct forum, I am quite new to OID
I am planning to use orclDbServer Object Class, but not sure how to use, i have searched in Google, and Oracle Documentation, there are so little information about this, there are only:
Object Class: orclDbServer
Description: Defines the attributes for database service entries
Attributes: orclNetDescName, orclVersion
Below is the ldif file i created for add one entry with object class orclDBServer:
dn: cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
changetype: add
objectclass: top
objectclass: orclDBServer
cn: orclDBServer_test
orclNetDescName: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
after i use below command to add this entry:
ldapadd -h localhost -p 389 -D "cn=orcladmin" -w welcome1 -f test_add.ldif
then use ldapsearch to search:
ldapsearch -h localhost -p 389 -b "dc=lcom" "objectclass=orclDBServer"
the result is like below:
cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
cn=orclDBServer_test
orclnetdescname=(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
objectclass=top
objectclass=orclDBServer
objectclass=orclService
It seems it added a line for me:
objectclass=orclService
Is there anything wrong with my ldif file when i want to use orclDbServer?
Edited by: ening on Jan 5, 2010 9:31 PMHi,
if you are having main controller and sub-controller then you may need to use below coding to use application class reference.
*Data declaration
DATA: obj_cntrl TYPE REF TO cl_bsp_controller2,
obj_sub_cntrl TYPE REF TO z_cl_sub_cntl,
application TYPE REF TO z_cl_application.
*Get the controller
CALL METHOD obj_main_cntrl->get_controller "obj_main_cntrl is the object of main controller
EXPORTING
controller_id = 'SUB' "Controller ID
RECEIVING
controller_instance = obj_cntrl .
obj_sub_cntrl ?= obj_cntrl .
application ?= obj_sub_cntrl ->application.
or simply use below code in your controller method.
application ?= me->application.
Thnaks,
Chandra -
How to send IDOC with extended message type MATMAS
Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
NikHi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material PR No Item No Quantity
A 00001 10 1
B 00001 20 3
B 00002 10 3
C 00002 10 1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik -
How to reimport a changed Interface / Message Type to NW BPM
Hi,
I m developing a NW BPM process (NWDS SP 09) to be used with SAP PO 7.31.
The process is using 15 different imported Interfaces, all of them depending on an External Definition, which unfortunately need to be changed. In PI so far no pretty easy, adapting some mappings, no problem.
But how can i update the process?
Just importing an existing Interface again leads to error message:
Could not import WSDL document:
Could not import WSDL document:
Cannot change XsdSimpleTypeDefinitionWrapper {http://www.namespaceDef.com}
LocationIdent by importing the document http://www.namespaceDef.com/::src/wsdl/SI_OUT_ASYNC_Interface01.wsdl,
because it is already defined in the document in this project.
Importing into another project might be possible
SI_OUT_ASYNC_Interface01.wsdl
/LocalDevelopment~bpm_product~pr~pm~company.com/src/wsdl
Unknown Document Import Marker
Unknown Document Import Marker
Is it possible. that i have to start from the scratch?
/UdoHi Moritz,
did i solve it?
No, not properly. I'm going to handle it...
Reimport of a changed own created Message Type works. Reimport of External Definitions does not work. Not nice - during a project it is very common that someone wants to have the data structure changed. And then you have a little problem. How can you recommend a tool what is not able to handle such simple change requests?
So what i did: I created a kind of a "neutral" message type, only used in BPM. I guessed which fields might become important in the future inside BPM for conditions and added 3 "flexible" fields. Plus one field, where i serialized the whole message (using the CDATA expression). Inside BPM i can react on requirements having the values of my fields accessable, but the message itself is serialized into one field value. If there is a requirement from the project to change the Message Type i just need to adapt my mapping from source to BPM. BPM to target is just deserializing and in a second step doing the normal mapping.
The whole solution is a bit complex and self made, but working. Of course i cant start from the scratch for each change.
/Udo -
How to change P.O. duplication message type from warning to error for Order
Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, JinThanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin -
We are using a non-standard true type font (Zurich Ex BT) when creating a .pdf document but when others view it, the font is changed on their computers. How do we use this font and keep it from being changed when others look at it?
This is actually good stuff and well written but I hesitate to advise people to use either the "oven trick" or really even the heat gun method as both are notriously short-lived even if they appear effective. Your far better bet is to send the board in to one of the vendors on the internet who are set up to do a proper reball. Even those fixes are good for maybe 12-18 mos. But again, you get a high grade for spelling it out.
-
HOW TO USE "WITH" STATEMENT IN MESSAGES
MESSAGE e001 WITH WERKS SY-REPID
TELL ME HOW TO USE "WITH" IN MESSAGES SEND SYANTAX AND EXAMPLE CODEMessages e001(zz) with Var1 var2 var3.
For this statement to be valie, the variables var1 var2 var3 should be defined alrteady in the program.
and in se91, you should define a message class (Say ZZ ).
In that message class you can create a message with number (Say 001) with place holders (&).
001: & is a sampele message for & hgh & hjknkn
The & will get replaced by the variables var1 var2 var3 in the run time.
YOu can also create success messages if yo say:
Messages S001(zz) with Var1 var2 var3.
Information
Messages I001(zz) with Var1 var2 var3.
Warning:
Messages W001(zz) with Var1 var2 var3.
Abend:
Messages a001(zz) with Var1 var2 var3.
REFER sample programs : DEMO_MESSAGES
DEMO_MESSAGES_SIMPLE
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
Hi,
We are evaluating the Adobe Captivate software and we are in
the process of identifying on how to use the Object model to record
the screen Programmatically. Do you have any idea on how to do this
using the captivate object model? We have a custom application and
we want to activate the recording by clicking a button in our page.
Kindly help. Thanks.
EricHi Captiv8r / Rick,
Thanks for your answer,
Actually, we have a web application that utilize the WME
(Windows Media Encoder) to record a video from the client side by
just clicking a button on our web page. That button has the
application logic to start the recording of his screen via calling
some "methods" on the WME dll files via object model (API). Now, we
are looking for some possible solutions on how we can implement the
same thing using the Adobe Captivate software or how we can utilize
adobe captivate to be able to integrate this software within our
web application.
Do you have any suggestions on how we can leverage the
benefits of adobe captivate in a custom web application? Thanks.
Eric
Maybe you are looking for
-
How can I play video on my iPhone and have it display on my iMac?
I don't own a tv. But I do own an iPhone 5s and an iMac. I'd like to mirror the video I have access to from my phone onto the iMac. How can I do this?
-
How do I get AE CS6 updates for Maverick Mac
I have a new version of Adobe AE CS6. I have just installed it from the DVD @on my Mac running Maverick. It says it installed the software but won't run the program so I can't download the necessary updates for AE CS6. How can I get this program up
-
Save for Web & Devices, The operation could not be completed
I keep getting this error when I Save for Web & Devices: The operation could not be completed. I have saved for the web before for many more complex, larger images without a hitch. I am using a psd format with an image that I designed. It is no more
-
Validation rule - on fail prevent save?
Is this possible if you do not have approval hierarchy enabled?? thanks, Robert. Edited by: Robert Angel on 19-Jan-2012 06:46
-
when open the itunes, always pop up error code 4002, how can I fix this issue?....