How to use Search plugin functions in your plugin?

Hi,
I am developing a plugin which need to add an action for bookmarks. For this I need to search a particular word in the document and the corresponding page number.
On going through the SDK documentation I came across the Search plugin. There are ways in which your plugin can communicate with the Search plugin. For doing so you need to do the following:
1. Add HFT of the Search plugin by registering PluginImportReplaceAndRegister.
2. Add "SrchClls.h" header file.
I did the following steps and my plugin compiled successfully. But I am not able to understand how will I use the Serach plugin functions to find a word in the document from my plugin?
Please help.
Thanks

The HTML help is spectacularly unhelpful, sometimes giving dozens of unrelated methods when you try to read the section for Search. But try Search... http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/API_References/Acrobat_API_Ref erence/AV_Layer/Search.html
It's worth making sure that you understand the difference between "Search" and "Find" functionality in Acrobat, something rather masked in the UI in recent releases.
Find - looking for a string in the current document. The Search API has no connection to this.
Search - managing indexes of multiple documents. API provides limited functionality (create/delete/query/search). Search results are not available to the API, they can only be displayed in the UI as a results window.

Similar Messages

How to use search/find function in a whole book?

Hi,
New to indesign... working on a book file which comprises 25 chapters.
I'd like to do a final proof to ensure all double spaces have gone, all quote marks are right etc
Instead of opening each chapter and using "search/find" through each chapter, can i tell the "search/find" function through the whole book?
Appreciate any feedback
Thanks heaps

Apparently Adobe thought that would be more appreciated than a book-wide Search/Replace.
You can read all about CS5's new features, and their selection procedure, on http://indesignsecrets.com/michael-ninness-answers-indesign-cs5-critics.php. The "Book" feature doesn't even get mentioned under "Sorry, we didn't change that at all." Also make sure to read the comments -- it seems lots of people really want more book features.
If you're one of them (so it seems), you might want to pay a visit to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How to use search function in ipod nano 7th generation

how to use search function in ipod nano 7th generation?
Cheers thanks.

There is no search function. If there was, it would be mentioned in the iPod's User Guide.
7G Nano User Guide
B-rock

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

How to use the CMS functionality in Sun Portal Server 7.2

Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
Srikanth

Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps!

How to use xsl document() function with LiveCycle XSLT processor

Hello,
I would like to use LiveCycle XSLT processor to merge xml documents by using the xsl document() function.
However, I have not, yet, found clear reference information on the specifics of how to accomplish in LC. For instance if you have
a transformation that does merging using a standalone xml editor (such as Oxygen), than what is required to accomplish the same
using the LiveCycle XSLT service. How do you specify the URI of the XML document that is specified as an input in the xsl document() function. Your insight is appreciated. Regards

Hello Steve,
I checked the reference that you cited (XSLT Transformation). The reference omits discussing how to use xlst document() function within a stylesheet. I think that probably means that feature of xslt technology is not directly available through LiveCycle. When I find a workaround, I'll post an update...for the user community that might encounter the same issue. Thank you for your response and insight. Regards, jb1809

How to use query-database() function in transformation?

Hi All,
How to use query-database() function in transformation?
It is giving four fields but if i write select query in sqlquery field it is saying select node is not found....
plz help me out
Regards
Pavankumar
Edited by: [email protected] on Jul 29, 2009 2:49 AM

Hi,
To answer your query:-
http://abhishek-soablog.blogspot.com/2008/08/orclquery-database.html
Cheers,
Abhi...

How to use search term2 in customer master record

hi
how to use search term2 in customer master record. can anyone tell me plz
thanks
monica

Hi,
Search Term 2
Label used for search helps.
Only uppercase letters are stored in this field. Your entries are converted automatically to uppercase letters.
There are two of these fields for search terms. These fields can be used independently of each other.
Procedure
You can use your own criteria for entering the search term.
Example
You can enter the main part of the name or an organizational ID.
For example, for the company "Hechinger & Sons", you could enter "Hechinger" as the first search term.
The second search term could then be the name ID you use within your company, to help you identify your data later.
Please check out the following link:
http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9b331455711d182b40000e829fbfe/frameset.htm
Hope this helps.
Please assign points as a way to say thanks.
Regards,

How to use search help in ECC6.0 reports without matchcode.

How to use search help in ECC6.0 reports without matchcode.
Select-options: O_SHIP FOR KUNWE MATCHCODE OBJECT DEBI is in 4.6c.

we can use on value request for that.
report zrich_0001 .
tables: t001.
data: begin of it001 occurs 0,
bukrs type t001-bukrs,
butxt type t001-butxt,
ort01 type t001-ort01,
land1 type t001-land1,
end of it001.
select-options s_bukrs for t001-bukrs.
initialization.
select bukrs butxt ort01 land1 into table it001 from t001.
at selection-screen on value-request for s_bukrs-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BUKRS'
dynprofield = 'S_BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = it001.
start-of-selection.
refer to this thread:
On value request?

How to use search help in layout of se51

how to use search help in layout of se51.

Hi,
One of the important features of screens is that they can provide users with lists of possible entries for a field. There are three techniques that you can use to create and display input help:
Definition in the ABAP Dictionary
In the ABAP Dictionary, you can link search helps to fields. When you create screen fields with reference to ABAP Dictionary fields, the corresponding search helps are then automatically available. If a field has no search help, the ABAP Dictionary still offers the contents of a check table, the fixed values of the underlying domain, or static calendar or clock help.
Definition on a screen
You can use the input checks of the screen flow logic, or link search helps from the ABAP Dictionary to individual screen fields.
Definition in dialog modules
You can call ABAP dialog modules in the POV event of the screen flow logic and program your own input help.
These three techniques are listed in order of ascending priority. If you use more than one technique at the same time, the POV module calls override any definition on the screen, which, in turn, overrides the link from the ABAP Dictionary.
However, the order of preference for these techniques should be the order listed above. You should, wherever possible, use a search help from the ABAP Dictionary, and only use dialog modules when there is really no alternative. In particular, you should consider using a search help exit to enhance a search help before writing your own dialog modules.
Input help from ABAP dictoinary
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
Field Help on the Screen
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa6135c111d1829f0000e829fbfe/content.htm
Field Help in Dialog Modules.
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards,
Vara

How to use Round off function in TAX Formula

Dear All,
         I have to do Round off in the Tax Formula. Hence I was suggested by the SAP Forum Team to use Round off function in the Tax Formulae.
         But sir I don't know how to use Round off function in the Tax Formulae.
        For Eg. BaseAmt = Total
                    TaxAmt = BaseAmt * Rate
           Now within this Eg. How will i use the Round off function and where i will use it.
           Please guide me with example.
Regards
Hitesh Parsawala

Hi Hitesh,
you can do like this
Cess_ST_TaxAmt=Round(Cess_ST_BaseAmt*Cess_ST_Rate,0)
where you can introduce rounding function by choosing from dropdown available in Operation and by click on Insert.
It will post following in formulla window
Round (Number, Decimals as Number)
where in parameter you have to give 1.Number-which is to be round and 2.Decimals as Number-as per your requirement like by 2 decimal or 0 decimal
If required give me call,
BR
Samir Gandhi

How to use a C function as a native method

Could anybody tell me how to use a C function as a Java native method.
Thanks

Read all about it.
You'd probably have to write a little wrapper (using JNI) that passes
parameters and return values around between your C function and
the JVM.
kind regards,
Jos

How to use case when function to calculate time ?

Dear All,
May i know how to use case when function to calculate the time ?
for the example , if the First_EP_scan_time is 12.30, then must minus 30 min.
CASE WHEN FIRSTSCAN.EP_SHIFT <> 'R1' AND FIRSTSCAN.EP_SHIFT <> 'R2'
THEN ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF((CASE WHEN SHIFTCAL.EP_SHIFT = 'N1'
THEN CONVERT(VARCHAR(8),DATEADD(DAY,+1,LEFT(FIRSTSCAN.EP_SCAN_DATE ,8)),112) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','')
ELSE LEFT(FIRSTSCAN.EP_SCAN_DATE ,8) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','') END),12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0 - 0.25) AS FLOAT),2)
ELSE ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF(FIRSTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0) AS FLOAT),2) END AS OTWORK_HOUR

Do not use computations in a declarative language. This is SQL and not COBOL.
Use a table of time slots set to one more decimal second of precision than your data. You can now use temporal math to add it to a DATE to TIME(1) get a full DATETIME2(0). Here is the basic skeleton.
CREATE TABLE Timeslots
(slot_start_time TIME(1) NOT NULL PRIMARY KEY,
slot_end_time TIME(1) NOT NULL,
CHECK (start_time < end_time));
INSERT INTO Timeslots --15 min intervals
VALUES ('00:00:00.0', '00:14:59.9'),
('00:15:00.0', '00:29:59.9'),
('00:30:00.0', '00:44:59.9'),
('00:45:00.0', '01:00:59.9'),
('23:45:00.0', '23:59:59.9');
Here is the basic query for rounding down to a time slot.
SELECT CAST (@in_timestamp AS DATE), T.start_time
FROM Timeslots AS T
WHERE CAST (@in_timestamp AS TIME)
BETWEEN T.slot_start_time
AND T.slot_end_time;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How to use Search plugin functions in your plugin?

Similar Messages

Maybe you are looking for