How to use SHD0 to hide fields / tabs in CRMD_ORDER

Hi, i have to hide some tabs and fields for some users when executing tx. CRMD_ORDER. I have read that i should use tx SHD0 but don't know how it works...
What i have to hide is the following:
- Sales order's Header: filed "net value" in tab General.
- Sales order's item: Tab Item Overview, tab Prieces, tab Conditions, tab Billing.
Can anyone help me or explain how to use SHD0 or tell me what other things can i do ???
Thanks in advance....

Hi,
SHD0 is used to create transaction variants. With this transaction you can control the display and modifications of screens, screen fields, buttons, menus and any other gui elements that are used in transactions. The settings can be saved as variants and can be used accordingly. for eg: You can maintain different transaction variants for different users.
Following are teh steps to create transaction variants.
1. In transaction SHD0, enter the transaction name for which you want to create a variant. Give a variant name.
2. Then press "Create" button on the application tool bar. This would run the transaction.
3. Enter values in transaction and run it as usual. After every screen or tab, there will be a pop up displaying the screen elements and the options. Eg. If you want to hide Field 1 in screen 1 then against field 1 check the option "Invisible".
4. After all teh screens are through, save the transaction variant.
5. This variant will have to be assigned in customizing to the transaction so that it applies to teh transaction and you can see the changes.
Hope this helps.
Thanks,
Rashmi.

Similar Messages

How to hide custom tab in crmd_order

hello gurus,
In crm how to hide a custom tab (which is created through EEWB Transaction )for particular order types??
ex: if a tab named ADDITIONAL DATA B is holding the info like contact name ,customer PO etc.,here my requirement is to hide that tab for some order types like CR & DR.
Plz help me out in this issue..
Bye--
Pradeepa

Hello Pradeepa,
2 options to replicate the custom data to R/3:
A- via EEWB, flag the 'R/3' flag
extract from doc:
Field Relevant for R/3 Execution?
Specifies whether you use CRM Sales with R/3 Supply Chain Execution, and whether you wish to transfer the field to the R/3 System.
Use
If you set this flag, the system generates a BAdI implementation that transfers the field to R/3 BAPI structures. If your executing system is an R/3 Enterprise System, the system enhances the BAPI structures and tables for sales orders in the R/3 System so that the field is transferred automatically to the R/3 sales order.
So, with this flag, during generation, the whole flow to R/3 and also the fields in the tables in R/3 are created.
B- write your own integration flow via exits/badi in the middleware to integrate the fields into existing fields in R/3 tables.
Regards,
Fred

How to use alias in "From" field when I send a mail with utl_smtp ?

Hi all,
I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied to use utl_smtp.mail(l_connection, '<toto> [email protected]') but it doesn't work. The only way I can send mail is when I set utl_smtp.mail(l_connection, '<[email protected]>') directly. When I use the Alias, I have an error from smtp server telling that I use a bad syntax address.
Does someone know how to use the alias ? Where do I do a mistake ?
Thank you for your help.
sis2b

Thank you, I find how to solve the problem thanks to your link.
I try to send HTML E-mail so I had the From in the from field writen in the header of the mail and not to initialize the connection.
sis2b.

How to use an infopath form field in the designer workflow

Hi,
I need to send an email to a person field from Infopath form. Can i access it in the workflow. If not, is there a way i can send an email on form submission from within the infopath form.
Please help. Thank you.

Hi Prajk,
There are three ways of achieving it, one i will say its pretty straightforward and covers the basic of Infopath Forms Development
1)Populate Fields From Infopath Form at the time of Publishing.
The moment you done with your form and to publish you click FIle>Publish>SharePoint Server >Enter the Url of Site> Then Click Next twice upto a point where wizard asks "The fields listed below will be available as SharePoint Columns" ,
Click Add, select the placeholder in myfields for Person Field , expand the "person" group field and choose "AccountId", give the name to column(this will be SharePoint List Column Name) and for function select "first" and then
click next and Finish.
And use this field in Designer Workflow to send email.
2)Second way is to write VSTA based C# code on click of your Submit action on the form and upload and activate this form on form library via Central Admin.
3)Now other way of doing this is via Event Recievers.
Every infopath Form is an XmL File so on ItemAdded event you can extract its content and implement email sending c# code there:-
http://www.bizsupportonline.net/infopath2007/how-to-use-sharepoint-event-handler-object-model-submit-data-infopath-form-sharepoint-list.htm
Mark as Answer if helped!! To be or Not to Be..The question is this only......

How to use the method for field-exit to trigger the workflow?

Dear all,
     I want the workflow to trigger , when ever the check box for DELIVERY COMPLETED is checked in ME22N .
     I have developed a method in SE18 for the corresponding field and defined function module SWE_EVENT_CREATE with BOR bus2012 and event CHANGED.
    Now how to use this method to make my workflow to trigger?Shall I create an event in delegated bus2012 and can I call this method?
Thanks and regards,
S.Suresh

Hi
You want to place your method which is defined for particular filed.right?
For that you can go for BADI. First you check whether any badi is getting called form that tcode ME22N. Then to place your method, implement that BADI. So whenever that BADI is getting called, it will call your event. Through Event workflow will be getting triggered.
Regards,
Hemalatha.

Can anybody tell me how to use SHD0-tRANSACTION VARIANT

hI,
pL.tell me the procedure to use SHD0 for co01 and CO02 T-CODES

Dear Laxmikanth,
Transaction variant or Screen variant does not works out for T
code CO01 or CO02.
As far I know you can restrict only the plant and order type ,I
dont think you can restrict the user's to change or modify the
BOM Components.
Regards
Mangalraj.S

How to use selected row on another tab ?

Hi,
I created a table with a number of rows, containing a objectid and other stuff.
When I select 1 or more rows and click a button,
my application is doing his thing,
and finally I got a message that all went fine.
When I select another tab in that same page,
I want to display the previously selected object id's.
I created a getter and setter in my backingbean for these id's.
When I print them on the first tab, they are available,
but when I click the other tab, they dissapear....
Anyone who can help me how to do this ?
So I need to set a String in 1 tab, and display it after I changed to another tab.
Thanks.

Hi,
I'm not using a VO.
I have in memory an array of selected id's.
They should be printed on another tab , but when I click that tab, they are empty.
If I display them on the same tab, they get filled out after I clicked the button.
But navigating away from that tab clears the contents.
Maybe some code could help :
in my backingbean_method :
RowKeySet rks = graph_table.getSelectedRowKeys(); => graph_table is the table using a VO and displaying some rows. (binding)
while(itr.hasNext())
key = itr.next();
graph_table.setRowKey(key);
Object o = graph_table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) o;
Row row = rowData.getRow();
objectid[i] = row.getAttribute("Objectid").toString(); => array of objectid[] contains all selected objectids I want to display in another tab.
title = objectid[0]; => just to try one
i++;
I added a getter and setter method for title in the backing bean.
In my JSPX page, I use : #{FNI_backing_bean.title}

How to use standard T-CODE fields.....

hi all ABAP masters,
i need to use 2 field values of standard T-CODE ME11 they r NET VALUE and MATERIAL.
i want to use the values entered in the textboxes against these to fields in my program. how can i refer to them without any modification in the standard program.
usefuk help will be rewarded.
thanks
devender

Hi Devender ,
You have to use User Exit and you have to write your code in perticular exit include program.
Please find below user exits belongs to ME11 . you can select suitable to your requirement from below .
LMEDR001            Enhancements to print program
LMELA002            Adopt batch no. from shipping notification when posting a GR
LMELA010            Inbound shipping notification: Transfer item data from IDOC
LMEQR001            User exit for source determination
LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001            Customer-Specific Source Determination in Retail
M06B0001            Role determination for purchase requisition release
M06B0002            Changes to comm. structure for purchase requisition release
M06B0003            Number range and document number
M06B0004            Number range and document number
M06B0005            Changes to comm. structure for overall release of requisn.
M06E0004            Changes to communication structure for release purch. doc.
M06E0005            Role determination for release of purchasing documents
ME590001            Grouping of requsitions for PO split in ME59
MEETA001            Define schedule line type (backlog, immed. req., preview)
MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1            Enhancement to Document Overview ME21N/ME51N
MEVME001            WE default quantity calc. and over/ underdelivery tolerance
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
MMAL0001            ALE source list distribution: Outbound processing
MMAL0002            ALE source list distribution: Inbound processing
MMAL0003            ALE purcasing info record distribution: Outbound processing
MMAL0004            ALE purchasing info record distribution: Inbound processing
MMDA0001            Default delivery addresses
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
AMPL0001            User subscreen for additional data on AMPL
if you give me brief i can help you out more.
Thank you .
Regards
Ram

How To use JFile Chooser in a Tabbed Pane Dialog

I have created a tabbed pane dialog. In one of the tabs I want to add a JFile Chooser.
How can I approach this problem. also Do I have to use a JDialog with a frame or can I create a JDialog without using a frame and create a instance from the main function.

I have created a tabbed pane dialog. In one of the
tabs I want to add a JFile Chooser. Since JFileChooser is a JComponent you could add it to any Container like any other JComponent.
Maybe you have to do some init by hand which is done normally by the show*() methods of JFileChooser. Taking a look at the source of showDialog() should help.
Hope that helps,
Alex

How to use user defined contact fields in Pages 4.3?

I would like to use new fields definded in Contacts (Vers. 7.1) in Pages (Vers. 4.3) for personalizing documents on my iMac under Mountain Lion. Is this possible, and how? Thank you.

Yes, here are four of them:
#1: shows the new field "foo" in the template
#2: shows "foo" in the list of names
#3: shows "foo" while editing a new card
#4 shows the absence of "foo" in the available names while trying to put the field "foo" in a pages document.

How to use internationalization in Label fields in Screens in OPA

Hi
I am very new to Oracle Policy Automation. I am developing a screen which will give the option to the user to select languages. Based on his/her selection, the next screen should display a welcome message in the language selected.
I have two properties files (one for each language) and I have placed them inside the /classes/configuration folder.
Now, my query is how to invoke these properties files based on user selection and what should I write in the label field so that the messages are dynamically picked up.
Thanks in advance for the help.

Sounds like you want to allow the end user to run the Web Determations interview in a choice of languages, based on selecting a particular language from a list at the start of the interview? If so, the right approach is to use the translation layer functionality.
You should read the OPM Help article "Create a new language translation for a rulebase": http://download.oracle.com/docs/html/E20340_01/Content/Languages/Create_new_language_translation_for_rulebase.htm
Cheers,
Jasmine

How to use php variable for default tabbed panel

I have a tabbed panel and with tabs labelled with the days of the week. What I want to do is open up the tab that correspond to the current day. I have been using the following to get the day in 3 char format:
<?php
$jd=cal_to_jd(CAL_GREGORIAN,date("m"),date("d"),date("Y"));
echo(jddayofweek($jd,2));
?>
What I want to do is replace the value for the default tab in the following statement with a variable that matches the day returned with a number:
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab:1});
Please could anyone advice?
Regards,
Lloyd

Hi,
BIND_VARIABLE is useful when you have only IN variable but in your case you have IN and OUT.
I don't know if you use the gateway for MS SQL SERVER or HSODBC/DG4ODBC but here how you can do to call a remote procedure with bind variables:
DECLARE
ret integer;
inp varchar2(255);
outp varchar2(255);
BEGIN
inp :='Hello World';
outp :='';
ret := "dbo"."in_out_proc_test"@tg4msql( inp, outp);
dbms_output.put_line('Input value: ' ||v_ut1||' - Output value: '||v_ut2);
END;
The MS SQL Server procedure belongs to the user "dbo" and the database link
being used is tg4msql.
The following line initilaize the out variables of the procedure with an
empty string:
outp :=''
I hope it helps you.
Regards
Mireille

How to use new cost center field, new profit center field, new account field?

As I create a new change request of adding new GL account, or that of new cost center, or that of new profit center, I normally enter the new GL code GL01, or new cost center CC01 or profit center code PC01 in "General Data" section on the change requst screen, these codes (GL01, CC01, PC01) are landed in ECC upon data replication.
I do see there is another field called "New Account" of GL change request, or "New Cost Center" of CC change request, or "New Profit Center" of PC change requst all of which is under "Administrative Data" section. I have never used it. but I was wondering what the purpose it will serve and how should I use them.
Please advise,
Thanks,
LUO.

Hi Kiran,
Thanks for the info. I don't quite understand though. could you tell me more about the usage of each? Why it is used when GL or CC or PC is blocked? Would the new cost center code entered replace old cost center master record?
Thanks,
LUO

How to use REFNUM to communicate between Tab Control Indicator panel and subVI without explicit connections?

Hi! One of my test programs needs to show many readings on the fron panel. I used a 4 page Tab Control to separate
different catagory readings and put them in the clusters. If I connect these indicator clusters to the subVI by refnum explicitly, the program runs too slow. So I am trying to make the subVI communicate with the front panel without explicite refnum connection. So far, the subVI can communicate with the clusters on the front panel but not on the Tab Controls. Is anyone can give me some ideas how to communicate/pass the data to the clustes on the
Tab Control? Thanks,

Hi Qian,
If I understand the question correctly; you want to know if there is some other way to access the controls on the tab control without actually using a refnum from the VI that has the controls.
To answer this question I would say that LabVIEW is a very powerful programming language and one of the very cool features is that it gives you access to all the controls on a VI into another VI without actually passing any data between them.
The best way to do this would be using VI Server. The functions that you need to call would be Open VI reference to open a reference to your VI having all the controls. Then use a combination of Invoke nodes and Property node get access to the controls on the front panel of your VI.
Do let me know if you have further questions.
Ankita A.

How to use the Cross Reference fields in P4P

I have been receiving questions related to the Cross Reference section from many different customers and partners. This post represents my attempt to describe the Cross Reference Section and the Equivalent Numbers stored within.
Identity
A term that Kelly uses and I will borrow is “identity”. A given specification can have many identities. The basic identity is the specification number generated by GSM. This is useful during early stages of design. Once we get past a draft or development status in the workflow the organization quickly wants to identify the specification in other ways. Examples include:
Execution System Number: Operations and Supply Chain quickly need to formalize an item or material for forecasting, inventory and purchasing…
Custom Numbering Conventions: Sometimes an organization has very specific custom logic for identifying materials. Usually terms like smart numbering are used to describe their methods.
Data Migration Identifier: In some cases customers have extensive data clean up projects. As part of the effort systems and processes are developed and an identity is created. In my experience we loaded a “Base Stock” number to represent Packaging Materials. The label stock that was commonly used was historically not represented so we created a number as part of the migration project.
Identity Functionality:
The Fields: The four major fields that make up the Cross Reference section are as follows:
>>System Name: This field describes the system generating the identifier. Examples I like to use are Oracle EBS or SAP Material Master. Sometimes geography must also be concatenated to the system, i.e. Oracle EBS – NA. This occurs when the customer is a large multinational where multiple ERP implementations exist. Therefore the same material may be known by many different numbers, i.e. Oracle EBS – NA = 77432, Oracle EBS – EU = 88883.
>>System Code: The system code is merely the syntax used during integration. Using CSS or various APIs you may chose to identify the system using an abbreviation, EBSNA or SAPMM.
>>Equivalent: The value representing the identity within a given system.
>>Externally Managed: If you are using CSS or an API to receive Cross Reference data you can define the field as "Externally Manged". When a cross reference is marked in this manner the general user community will not be able to edit the field. Administrators associated with the role [Externally_Managed_Cross_Ref_Admin] can edit the field if needed.
Syndication: While some users enter equivalent numbers manually, others use integration tools to generate and transmit identities. If a given cross reference is marked as “Externally Managed” then users are unable to manually enter data. On initial syndication the specification will not have a given equivalent. The specification is sent to middleware, a number is generated by the appropriate system and the response is sent back to GSM to add the System Code to the specification with the appropriate identity value.
Copy verses Issue:
>>Copy: When a user copies a specification the Cross Reference data is NOT included. Since the identities refer to the originating specification it does not make sense to carry over to the copy. If we did then users would quickly need to delete the data.
>>Issue: When a user issues a specification it maintains the Cross Reference data. This is an important concept because it is expected that a system like GSM will have many issues related to a single ERP #. ERP systems are usually not interested in many of the fields stored in the Product Data Management system.
Reference: As raw materials are consumed as inputs into Formulation or Trade Specifications the organization may come to identify the materials based on equivalent numbers. Therefore GSM allows for an equivalent number to appear next to the GSM number.
Implementation Issue: Ingredients In Packaged Quantities
Some customers run into a situation where the ingredient specification does not represent a packaged quantity. From an R&D perspective the developer does not care if the material comes in a box or a tanker. In this situation the GSM ingredient may be represented in the ERP system by many items and therefore more than one cross reference value. These items represent packaging differences that are important to purchasing, manufacturing, warehousing, and other execution systems.
I hope this helps describe some of the purposes and implementation issues around the Cross Reference field.

You need to get jmf.jar in your CLASSPATH, either on the command line, in an environment variable, by putting a symlink in $JAVA_HOME/lib/ext, whatever works for you. Have you done that? Once it's in the classpath, you can run jmstudio from any directory with the command "java JMStudio".
Items in the bin directory are just shell scripts, run with "sh jmstudio" or whatever suits your shell (on Mac OS X, copy one of these guys and append ".command" to the filename to make him double-clickable in the Finder).
--invalidname

How to use SHD0 to hide fields / tabs in CRMD_ORDER

Similar Messages

Maybe you are looking for