How to use SQL Procedure in SDK

Hi Experts
I have a form with grid. It is not attached with UDO to save data. I am using SQL Query (oRecordset.DoQuery() )to update and add records of this grid to the table. if there is ten rows then I have to insert records one be one . If five records are updated and after that there is some problem and rest of records does not update in the table. I want to use RollBack command of SQL so that all updated record must removed. Can i use SQL Procedure for that . If I can then how can I transfer all grid data to Sql procedure. Plz give your suggestion.
Thanks
Regards
Gorge

Hi,
I guess u can use oCompany.StartTransaction and end transaction after that u can commit or rollback.
Vasu Natari.

Similar Messages

HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)

Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
ramesh

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

How to use Stored Procedures in JDBC sender side and receiver side

Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
Soorya

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

How to Use SQL Query having IN Clause With DB Adapter

Hi,
I am using 11.1.1.5 want to find out how to Use SQL Query having IN Clause With DB Adapter. I want to pass the IN values dynamically. Any ideas.
Thanks

invoke a stored procedure, it's safer than trying to put together an arbitrary SQL statement in the JCA adapter

How to use SQL() function while writing scripts in BODS 4.0

How to use SQL() function while writing scripts in BODS 4.0

Hello,
I think you want to post your question to the [Data Integration and Data Quality Management|Data Services and Data Quality; forum. This forum is for other BusinessObjects SDK development questions.
Sincerely,
Dan Kelleher

How to use sql query in java ?

i don't know how to use sql query in java code.
who can give me some advice?
thanks

http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/

How to use SQL functions in the queries

hey guys i wanna know how to use SQL functions in the queries is it possible or not .

Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n);

I would like to inquire how to use air 2.7 sdk in flash cs5.5.

I would like to inquire how to use air 2.7 sdk in flash cs5.5.
I have searched some solutions online and tried to copy air2.7 content in air2.6 folder(replaced the old one). I then did some efficiency tests but I don't see any improvements at all. Did I miss anything?
Besides that, There's a display ratio problem if I publish the ipa in landscape mode. I can't interact with the program either. But it is not a problem if the ipa is published in portrait mode.

http://forums.adobe.com/thread/864964?tstart=0

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

How to use Stored Procedures in form 6i Blocks

Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.

The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts

How to use stored procedures in DIAdem and Can the stored procedures be used to return values?

Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiya

Hi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc ‏28 KB

How to use Sql Loader in Unix Environmant

Hi All,
Can anyone explain me please how to use sql Loader in unix environment.
Actually i have one control file i want to run that file in Unix how can i achive please explain me
Thank's

Hi Kuljeet,
Thank you for your replay
I just put my control file into the Unix Environmant that's fime
and when i trying to entering the following cmd in Unix environment i am getting this error
sqlldr username/password@string control='unix_pathname'i am not sure about the path name my question is
1) Do i need to give the Local file Path Or Unix Path
This is the error in Sql Loader:
SQL*Loader: Release 10.2.0.4.0 - Production on Mon Sep 24 13:14:23 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/bx167a/riskbatch/rdwdbat/sample_upl.upl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
Could you please correct me
Thank's

How to use Sql Tracer

Hi ,
How to use SQL Tracer..(ST05).
Thanks,
Subbu

Hi,
ST05: SQL trace
1.create a small ABAP/4 program that contains only the select statement. Before proceeding, test it to ensure that it works.
2.Open that program in the editor so that it is ready and waiting to execute.
3.Open a new session using the menu path System->Create session.
4.Run transaction ST05 (enter /nst05-zero-five, not oh-five-in the Command field, or choose the menu path System->Utilities->SQL Trace). The Trace SQL Database Requests screen is displayed.
5.If the Trace SQL Status Information box reads Trace SQL is switched off, go to step 7.
6.At this point, the Trace SQL Status Information box contains Trace SQL switched on by, followed by the user id who turned on the trace and the date and time it was started. You must switch it off before you can proceed. If the trace was started within the past hour, it is possible that it is still being used. Contact the indicated user or try again later. If the trace was started hours or days ago, the user probably left it on by mistake and it can be safely turned off. To turn off the trace, press the Trace Off pushbutton. The message in the Trace SQL Status Information box should now read Trace SQL is switched off.
7.Press the Trace On pushbutton. The Trace SQL Database Requests dialog box is displayed. The DB-Trace for User field should contain your user ID. If your user ID is not in this field, enter it now.
8.Press the OK button. You are returned to the Trace SQL Database Requests screen and the status information reads Trace SQL switched on by, indicating that you turned on the trace.
9.Switch back to the window containing your editor session (the one with your program waiting to execute).
10.Press F8 to run your program. (Only press F8, do not do anything else, do not even press the Back button.)
11.When your program has run and the hourglass is no longer displayed, switch back to the trace window.
12.Press the Trace Off pushbutton. The status information reads Trace SQL is switched off.
13.Press the List Trace pushbutton. The Trace SQL Database Requests dialog box is displayed. The fields on this screen will already contain values.
14.Press the OK button. You might need to wait a little while, at most a couple of minutes. The Trace SQL: List Database Requests screen is displayed.
15.Type %sc in the Command field and press the Enter key. The Find dialog box is displayed.
16.Type the name of the table you are tracing in the Search For field. (This is the table named in the select statement in your ABAP/4 program.)
17.Press the Find button. A search results list should be displayed with your table name highlighted.
18.Click on the first highlighted table name. You are returned to the Trace SQL: List Database Requests screen. Your cursor is positioned on the first line containing your table name. To the right of it, in the Operation column, should be the word PREPARE, OPEN, or REOPEN.
19.Press the Explain SQL button on the Application toolbar. The Show Execution Plan for SQL Statement screen is displayed.
20.Scroll down to the execution plan. The index used will be displayed in blue.
Jogdand M B

How to use SQL Developer Debugger

I'm using SQL Developer Version 3.2.20.09 and want to use its debugger option. I tried to get "how to use SQL Developer Debugger" by using google.ca but didn't get any tutorial. I really appreciate if someone suggest me any good and simple tutorial regarding SQL Developer Debugger, Thanks in advance.

Hello,
you can find a tutorial here:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/devdays2012/mod2_sqldev/mod2_sqldev.html
Joop

How to use 'oprofc' procedure?

How to use 'oprofc procedure'?
I don't find this program in JDEVELOPER2.0 directory.
is it necessary to launch 'oprofc' to use some oracle-specific
features (form exemple: CLOB)
null

David,
Please also see my reply to your other query about SQLJ and
CLOBs. It is my understanding that this script is only necessary
for command line SQLJ operations, and I don't believe it is still
used with 8.1.
Because JDeveloper handles the SQLJ translation for you, we do
not provide the command line utilities. They should be available
with either your server installation or the Oracle Client
distribution if you would like to use them.
-L
David DUPONT (guest) wrote:
: How to use 'oprofc procedure'?
: I don't find this program in JDEVELOPER2.0 directory.
: is it necessary to launch 'oprofc' to use some oracle-specific
: features (form exemple: CLOB)
null

How to use SQL Procedure in SDK

Similar Messages

Maybe you are looking for