How to use the "Clear PDA Chart .vi" in LabVIEW 7.1 PDA module?

In my iPAQ application, I try to use the LabVIEW 7.1 PDA module's "Clear PDA Chart .vi" to clear the graph. But I do not know how to do it. I always get error when I call it.
My code is attached. The code is to draw a sin wave and then clear it.
Attachments:
sin.vi ‏69 KB

Hi,
I verified the behavior that you reported. I got error code 260055065 on running the VI. It does not matter if you wire a control ref or tabbing order number to the Clear PDA Chart.vi.
This is a known bug and LabVIEW PDA developers are already working on it. Hopefully it will be fixed in the next release of the PDA module. Thanks for bringing this to our attention.
Regards,
Ankita A.
National Instruments

Similar Messages

How to use the CJC channel with 9211 in labview?

Hello there,
I have cDAQ-9172 with the 9211 module for some thermocouple measures.
I want to use 1 channel for the CJC and the others for normal teperature measurements.
I have the VI attached.
Thanks,
Sandro
Attachments:
Cont Acq Thermocouple Samples-HW Timed2.vi ‏46 KB

Hi Sandro,
By "I want to use 1 channel for the CJC", are you talking about using the NI 9211's built-in CJC channel, _cjtemp?
If so, go back to the original example code and set the CJC Source control to Built-In. This will cause DAQmx to use _cjtemp as the CJC source. You won't see the CJC temperature on the graph by default: Reading the CJC Values with the Thermocouple Measurements.
If you have an external CJC sensor connected to one of the thermocouple channels (ai0:3), then create a global channel in MAX (thermistor, or voltage w/custom scale), specify the name of that channel in the CJC Channel control, and set CJC Source to Channel. It's better to use the built-in CJC sensor unless the external CJC sensor is definitely more accurate, and not less.
Regarding the Start button you added to the example VI, I would recommend moving the call to DAQmx Create Channel out of the polling loop so that it doesn't leak memory by creating DAQmx tasks that never get used. Adding a call to Wait Until Next ms Multiple (from the Timing palette) or Wait For Front Panel Activity (from the Dialog & User Interface palette) would prevent the polling loop from wasting CPU cycles.
Brad
Brad Keryan
NI R&D

How to use the chart option in bex analyzer

Hi Expert
i want to know how to use the Chart in Bex Analyzer.
Next week i hve End user Training. my user wanthow to use the chart option in Analyzer.
plz let me know how to use chart & any Document on that plz reply me.
Reagards
siva
Edited by: patel siva on Sep 16, 2008 4:34 PM

Check here:
https://reporting.uky.edu/BWBExContextMenu.pdf
http://help.sap.com/saphelp_nw70/helpdata/EN/8b/4ffd9b07474279b3bbee75a60db41f/content.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/30d43b0527a17be10000000a114084/frameset.htm
Thanks..
Shambhu

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to change the colour of chart in WAD.

Hi,
I have problem with web report. The web report with bar charts used to show with different colours earlier. Now when I execute the web report, the chart displays in single colour (All the rectangular bars in the charts are displayed in single colour say for example red). customer would like to see the chart with different colours. Please put some lights on it how to change the colour of chart in the report.
Thanks,
Sravan.

Hi Krish,
I have followed the steps which you suggested, but I am unable to see the changes when I execute the web report.
I could able to see the colour changes to the bars in the chart in the preview (i.e when I select the series 1 and change the colour for series 1 under Area properties). Like that I have done for all the 5 series, then I have clicked on Complete button, saved the web template and executed it, and I could able to see the changes in the preview but not in the report after execution.
I have two charts in my case, one is <b>Job function</b> chart and the other is <b>Job type</b> chart. The Job function chart is displaying with different colours from the begining, but the job type chart is displays all the columns in RED colour.
Is there any setting I need to do after selecting the colour at the series level.
Please correctt me if I am worng in doing the procedure.
Please update me how to do it...It is usefull if you can come back to me ASAP .
Thanks,
Saravanan.
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI

Any tutorials on how to use the daily build of the Flex SDK to create Flash Player 10 content?

Is there a tutorial on Adobe on how to use the daily build of
the Flex SDK to create Flash Player 10 content?

The approach you take might depend on a few things, but it boils down to using mouse interactive coding to trigger whatever effect you eventually realize. The code you use will depend on the version of Actionscript you plan to use.
You could make this as a movieclip that is normally stopped at its first frame and when you mouseover or click the movieclip, it animates along its own timeline to its enlarged state. If the thumbnail is very small and the larger version is substantially larger, and both need to be clear images, this might be the better approach.
If this only involves enlarging something, you could also probably realize it just using Actionscript Tween coding rather than timeline animation.

How to use the function module 'HR_ES_FEATURE_BACKFIELD'

Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

How to use the "Flash Field"?

Hi Everyone,
I'm trying to figure out how to use the new "Flash Field" inside my form.
The form we are working on required the user to interact with the "Flash Field" (i.e., click on the bar on a bar-chart) and the "Flash Field" should return some value (defined in the Flash logic) should be returned to the host (the PDF form) as the FlashField.rawValue, for example.
BTW: The SWF object that is consumed by the "Flash Field" is built by the Flash Builder latest edition (4.5). So we do have a total control on the logic inside the SWF project.
The Q here is: What is the possibility to modify my code inside my Flash project so it can expose the SWF object computed value to the rawValue property of the Flash Field?
Appreciating your collaboration....
BR,
Yasser

Hi,
Have a look at the Flash object Reference Card and the Flash object examples here: http://assure.ly/rqCuEn.
Hope that helps,
Niall

How to use the function module /IRM/IPBB_AGREEMENT_CREATE.

Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.

FORM create_agreement TABLES pt_agreement
                                       CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
        lc_cbasp TYPE /irm/s_ipcbasp,
      lt_cbapr TYPE /irm/t_ipcbapr,         "Partners
      lc_cbapr TYPE /irm/s_ipcbapr,
      lt_cbadt TYPE /irm/t_ipcbadt,        "Dates
      lc_cbadt TYPE /irm/s_ipcbadt,
      lt_cbafs TYPE /irm/t_ipcbafs,
      lc_cbafs TYPE /irm/s_ipcbafs,
      lt_cbacn TYPE /irm/t_ipcbacn,
      lc_cbacn TYPE /irm/s_ipcbacn,
      lt_cbacl TYPE /irm/t_ipcbacl,
      lc_cbacl TYPE /irm/s_ipcbacl,
      lt_cbtpv TYPE /irm/t_ipagtpv,
      lc_cbtpv TYPE /irm/s_ipagtpv,
      lt_texts TYPE text_lh,
      lc_texts TYPE itclh,
      lt_cbasd TYPE /irm/t_ipcbasd,
      lc_cbasd TYPE /irm/s_ipcbasd,
      lc_agreement    TYPE /irm/s_ipcbasp_doc,
      lc_e_log_number TYPE balognr,
      lt_messages     TYPE /irm/t_gprolog.
DATA: lt_vake      TYPE cond_vakevb_t,
        lc_vake      TYPE LINE OF cond_vakevb_t,
        lt_konh      TYPE /irm/t_gkonh,
        lc_konh      TYPE LINE OF /irm/t_gkonh,
        lt_konp      TYPE /irm/t_gkonp,
        lc_konp      TYPE LINE OF /irm/t_gkonp,
        lt_konw      TYPE /irm/t_gkonwu,
        lc_konw      TYPE LINE OF /irm/t_gkonwu,
        lt_konm      TYPE /irm/t_gkonmu,
        lc_konm      TYPE LINE OF /irm/t_gkonmu,
        lt_komg      TYPE /irm/t_gkomg_index,
        lc_komg      TYPE LINE OF /irm/t_gkomg_index,
        lt_user_data TYPE /irm/t_gpraxfu_index,
        lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
         hd(2) TYPE c VALUE '$$',
         inc_num(8) TYPE c,
        END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
        WHERE vkorg   = lc_rule-vkorg
        AND    vtweg   = '10'
        AND    spart   = '10'
        AND    boart   = 'ZPS1'
        AND    botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
   lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
    MOVE sy-tabix TO lc_str_knumh-inc_num.
    CONDENSE lc_str_knumh-inc_num NO-GAPS.
    WHILE lc_str_knumh-inc_num+7(1) = ' '.
      CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
      CONDENSE lc_str_knumh-inc_num NO-GAPS.
    ENDWHILE.
    CONCATENATE '$$' lc_knumh INTO lc_knumh.
    MOVE lc_str_knumh TO lc_knumh.
   MOVE c_strt_knumh TO lc_knumh.
    CLEAR: lc_konh, lc_konp, lc_komg.
    MOVE: lc_rule-vkorg    TO lc_komg-komg-vkorg,
          '10'             TO lc_komg-komg-vtweg,
          '10'             TO lc_komg-komg-spart,
          p_waers          TO lc_komg-komg-waerk,
          '1300'           TO lc_komg-komg-bukrs,
          lc_rule-lifnr    TO lc_komg-komg-lifnr,
          lc_knumh         TO lc_komg-knumh,
          lc_knumh         TO lc_konh-knumh,
          lc_knumh         TO lc_konp-knumh,
          lc_rule-datab    TO lc_konh-datab,
          lc_rule-datbi    TO lc_konh-datbi.
    CASE lc_rule-tablnam.
      WHEN 'A701'.                   "Every Agreement will have a A701 rule -
        "Therefore we acn setup the header using A701
        MOVE: 'New       ' TO lc_kona-knuma,
              lc_rule-vkorg TO lc_kona-vkorg,
              '10'          TO lc_kona-vtweg,
              '10'          TO lc_kona-spart,
              'ZPS1'        TO lc_kona-boart,
              'C'           TO lc_kona-abtyp,
              'V'           TO lc_kona-kappl,
              p_waers       TO lc_kona-waers,
              lc_rule-knuma_ag TO lc_kona-abrex,
              'ZPS2'        TO lc_kona-kobog,
              lc_rule-datab TO lc_kona-datab,
              lc_rule-datbi TO lc_kona-datbi,
              lc_rule-sap_agkey TO lc_kona-botext,
              '1300'        TO lc_kona-bukrs,
              'I'           TO lc_kona-updkz.
        MOVE: 'New       ' TO lc_cbasp-knuma_ag,
              'ZPS1'        TO lc_cbasp-boart_ag,
              p_waers       TO lc_cbasp-waers,
              'A'           TO lc_cbasp-setl_mth,
              'B'           TO lc_cbasp-setl_typ,
              'A2'          TO lc_cbasp-ident,
              'E'           TO lc_cbasp-setlm,
              'ZPDA'        TO lc_cbasp-pargr,
              'X'           TO lc_cbasp-npric,
              'LF'          TO lc_cbasp-stprl,
              lc_rule-lifnr TO lc_cbasp-stpar,
              lc_rule-contract_rev TO lc_cbasp-rvnum,
              'I'           TO lc_cbasp-updkz.
        CONCATENATE: blank_agree_key
               lc_rule-lifnr        INTO lc_konh-vakey.
        MOVE: lc_rule-lifnr TO lc_konp-lifnr.
      WHEN 'A703'.
        CONCATENATE: blank_agree_key
                     lc_rule-kunnr      INTO lc_konh-vakey.
        MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
      WHEN 'A709'.
        CONCATENATE: blank_agree_key
        lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
               lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
        CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
               lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
      WHEN 'A710'.
        CONCATENATE: blank_agree_key
            lc_rule-matkl   INTO lc_konh-vakey.
        MOVE lc_rule-matkl TO lc_komg-komg-matkl.
      WHEN 'A711'.
        CONCATENATE: blank_agree_key
             lc_rule-matnr   INTO lc_konh-vakey.
        MOVE lc_rule-matnr TO lc_komg-komg-matnr.
        IF lc_rule-kschl = 'ZPPL'.
          MOVE: 'C'              TO lc_konp-krech,
                'CAD'              TO lc_konp-konwa.
          lc_konp-kbetr = lc_rule-net_po_price * 1.
        ENDIF.
      WHEN 'A717'.
      WHEN 'A718'.
        CONCATENATE: blank_agree_key
             lc_rule-zzextwg INTO lc_konh-vakey.
        MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
     WHEN 'A719'.
       CONCATENATE: blank_agree_key
            lc_rule-werks INTO lc_konh-vakey.
       MOVE lc_rule-werks TO lc_komg-komg-werks.
     WHEN 'A721'.
       CONCATENATE: blank_agree_key
             lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
       MOVE: lc_rule-kunnr TO lc_konp-kunnr,
             lc_rule-kunnr TO lc_komg-komg-kunnr.
      WHEN 'A722'.
        CONCATENATE: blank_agree_key
                     lc_rule-vkbur INTO lc_konh-vakey.
        MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
      WHEN 'A724'.
        CONCATENATE: blank_agree_key
                      lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
        MOVE: lc_rule-kunnr TO lc_konp-kunnr,
              lc_rule-kunnr TO lc_komg-komg-kunnr,
              lc_rule-vkbur TO lc_komg-komg-vkbur.
    ENDCASE.
    MOVE: 'A'                  TO lc_konh-kvewe,
          lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
          lc_rule-kappl        TO lc_konh-kappl,
          lc_rule-kschl        TO lc_konh-kschl.
    REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
    APPEND lc_konh TO lt_konh.
    CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
    MOVE: lc_rule-kappl        TO lc_konp-kappl,
          lc_rule-kschl        TO lc_konp-kschl,
          'G'                  TO lc_konp-krech.
    IF lc_rule-kschl+3(1) = '%'.
      MOVE: 'A'              TO lc_konp-krech,
            '%'              TO lc_konp-konwa.
      lc_konp-kbetr = lc_rule-rebate_perc * 1.
    ENDIF.
    APPEND lc_konp TO lt_konp. CLEAR lc_konp.
    APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
    CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
      EXPORTING
      I_MESSAGES_DISPLAY        = ' '
      I_SAVE_MESSAGES           = ' '
      I_COMMIT_WORK             = 'X'
      I_CALL_FROM_WS            = ' '
        is_kona                   = lc_kona
        is_cbasp                  = lc_cbasp
        it_cbapr                  = lt_cbapr
        it_cbadt                  = lt_cbadt
        it_cbafs                  = lt_cbafs
        it_cbacn                  = lt_cbacn
        it_cbacl                  = lt_cbacl
        it_cbtpv                  = lt_cbtpv
        it_texts                  = lt_texts
        it_cbasd                  = lt_cbasd
      IMPORTING
        es_agreement              = lc_agreement
        e_log_number              = lc_e_log_number
      TABLES
        t_messages                = lt_messages
     CHANGING
      CT_VAKE                   = lt_vake
      ct_konh                   = lt_konh
      ct_konp                   = lt_konp
      CT_KONW                   = lt_konw
      CT_KONM                   = lt_konm
       ct_komg                   = lt_komg
      CT_USER_DATA              = lt_usr_data
      EXCEPTIONS
        no_documents_to_process   = 1
        no_authorization          = 2
        creation_failed           = 3
        new_pricing_not_maitained = 4
        OTHERS                    = 5.
    IF sy-subrc <> 0.
Implement suitable error handling here
    ELSE.
      MOVE: lc_agreement-knuma_ag TO po_agreement,
            lc_agreement-knuma_ag TO lc_kona-knuma.
    ENDIF.
    APPEND LINES OF lt_messages TO gt_messages.
ELSE.
    MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
    MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
   move '&'           to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
   MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
    move '&'           to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
    EXPORTING
    I_MESSAGES_DISPLAY      = ' '
    I_SAVE_MESSAGES         = ' '
    I_COMMIT_WORK           = 'X'
    I_INIT_DATA             = 'X'
      is_kona                 = lc_kona
      is_cbasp                = lc_cbasp
     it_cbapr                = lt_cbapr
     it_cbadt                = lt_cbadt
     it_cbafs                = lt_cbafs
     it_cbacl                = lt_cbacl
     it_cbacn                = lt_cbacn
    IT_FIELDS               =
     it_texts                = lt_texts
   IMPORTING
     e_log_number            = lc_e_log_number
     TABLES
       t_messages              = lt_messages
    CHANGING
      cs_agreement            = lc_agreement
    CT_VAKE                 = lt_vake
      ct_konh                 = lt_konh
      ct_konp                 = lt_konp
    CT_KONW                 = lt_konw
    CT_KONM                 = lt_konm
      ct_komg                 = lt_komg
    CT_USER_DATA            = lt_usr_data
    EXCEPTIONS
      no_documents_to_process = 1
      no_authorization        = 2
      change_failed           = 3
      agreement_locked        = 4
      OTHERS                  = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM.                    " CREATE_AGREEMENT

How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'

Dear Experts,
         Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.

Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
          "to be added as main partner or in place of Interaction Agent
          wa_partner_new-ref_guid = w_guid_ref.
          wa_partner_new-ref_handle = '0000000000'.
          wa_partner_new-ref_kind = 'A'.
          wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
          wa_partner_new-ref_partner_handle = '0000'.
          wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
          wa_partner_new-ref_partner_no = wa_partner-partner_no.
          wa_partner_new-ref_no_type = wa_partner-ref_no_type.
          wa_partner_new-ref_display_type = wa_partner-ref_display_type.
          wa_partner_new-display_type = 'BP'.
          wa_partner_new-no_type = 'BP'.
          wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
          wa_partner_new-partner_no = w_partner_no.
          wa_partner_new-mainpartner = 'X'.
          INSERT wa_partner_new INTO TABLE it_partner_new.
          wa_partner_newx-display_type = 'X'.
          wa_partner_newx-no_type = 'X'.
          wa_partner_newx-partner_fct = 'X'.
          wa_partner_newx-partner_no = 'X'.
          wa_partner_newx-mainpartner = 'X'.
          INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
    "maintain all changes to be done
    CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
      TABLES
        partner = it_partner_new
        partnerx = it_partner_newx.
    CLEAR : wa_guid1.
    REFRESH : it_guid1.
    wa_guid1-guid = w_guid_ref.
    APPEND wa_guid1 TO it_guid1.
    "save the changes
    CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
      TABLES
        objects_to_save = it_guid1.
    "commit the transaction
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha

How can I programmatically clear a chart?

Hi,
Could you please let me know how can I programmatically clear a chart? I would like to run a code multiple times and everytime I run it , the chart should be cleared . I tried to find a History property node but seems like there is no such properfy node for chart

If I have conceived your problem clearly, there is of course history data property node for charts. You may get one by right clicking on chart
create>>Property node>>History data(which is last on list)
CLAD
Passionate for LabVIEW

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

2 weeks trying to find out how to use the media live encoder in multi stream. And I can not find an

2 weeks trying to find out how to use the media live encoder 3.2 in multi
stream. And I can not find any clear instructions guide. Please from
my soul, taught me clearly, how I can stream to 2 different site
using live media encoder. what I do with ftml values and the other
one , wich everyone site give me, where should I put them, in what
order ... everything I tried, I got an error. I realy please you,
please !!!! thanks in advance !!

[Moved to Flash Media Live Encoder forum.]

How to use the "Clear PDA Chart .vi" in LabVIEW 7.1 PDA module?

Similar Messages

Maybe you are looking for