How to verify Nexus 3548P forwarding method?

Greeting!
Is there a way , or a command to verify the forwarding method of Nexus3548P?
Thanks in advance.

What do you mean mean by "forwarding method"? Could you give some examples?

Similar Messages

How to verify VPLS mac-address forwarding

I think VPLS know how to forward by mac-address. but how to verify it ?
for example I show mac-address vlan 100. But I can not find a command to verify How mac-address is forwarding ?
at 6509:
PA_C76_1>sh mpls l2transport vc
Local intf Local circuit Dest address VC ID Status
VFI PA-LA-test VFI 203.160.227.88 100 UP
VFI PA-LA-test VFI 203.160.227.95 100 UP
PA_C76_1>show mac-address-table vlan 100
Legend: * - primary entry
age - seconds since last seen
n/a - not available
vlan mac address type learn age ports
------+----------------+--------+-----+----------+--------------------------
* 100 000b.45b6.bc40 dynamic Yes 95 Router
* 100 0012.d946.59c1 dynamic Yes 10 Gi4/1

Hi,
VPLS provides the medium to for a E-LAN, and in Cisco implementations, the MAC learning is not actually done by a VPLS instance.
This can be best explained by an example.
PE(SW)-A ---- PE(SW)-B
PE(SW)-C
Now these three PE nodes under VPLS, are only provided the medium to connect to each other using P2P PW forming a full mesh.
For simplicity you can assume they are three switches connected in the above manner using copper. So this copper connecitivity is provided by VPLS.
And at the end of the day the end nodes learn mac addresses using the conventional method of flooding and learning. So you wont find any VPLS specific commands to see what mac address is the VPLS instance flooding. As its only providing a medium for connectivty. And the flooding is done by the end nodes. as they treat the VPLS VC as one of the outgoing port.
HTH-Cheers,
Swaroop

How to use RequestDispatcher.forward method in a portlet

I have a servlet (HelloServlet2) that acts as the controller. This is a very simplified example. This servlet calls the dispatcher.foward(req, res) method to foward to a JSP page for displaying. At this point I get a FileNotFoundException. The HelloServlet2 is in the standard location WEB-INF/classes/com/a2i/industrial/servlet/HelloServlet2.java.
How come it's looking in Industrial/servlet/HelloServlet2 instead of Industrial/WEB-INF/classes/..? If I access the servlet by http://host:port/Industrial/HelloServlet2, it works fine. I have another portlet (servlet) that doesn't call the forward method and it works fine too. Thanks for your help.
Here is the web.xml:
<servlet>
<servlet-name>HelloServlet2</servlet-name>
<display-name>HelloServlet2</display-name>
<servlet-class>com.a2i.industrial.servlet.HelloServlet2</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet2</servlet-name>
<url-pattern>/HelloServlet2/*</url-pattern>
</servlet-mapping>
Here is the calling code from HelloServlet2:
public void doGet(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
RequestDispatcher dispatcher= getServletContext().getRequestDispatcher("/hello.jsp");
dispatcher.forward(req, res);
Here is the portlet definition:
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>2</id>
<name>HelloServlet2</name>
<title>Hello Servlet2</title>
<shortTitle>Hello Servlet2</shortTitle>
<description>This is the "hello world" sample implemented using Java Servlets and the extensible renderer architecture.</description>
<timeout>10000</timeout>
<timeoutMessage>Hello Servlet timed out</timeoutMessage>
<acceptContentType>text/html</acceptContentType>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/html</contentType>
<autoRedirect>true</autoRedirect>
<showPage>/servlet/HelloServlet2</showPage>
</renderer>
</portlet>
Here is the stack trace:
7/15/03 10:43 AM industrial: JspServlet: unable to dispatch to requested page: java.io.FileNotFoundException: C:\ora9iasp\j2ee\OC4J_Portal\applications\_industrial\industrial\servlet\HelloServlet2 (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:64)
     at oracle.jsp.provider.JspFilesystemResource.fromStream(JspFilesystemResource.java:153)
     at oracle.jsp.provider.JspFilesystemResource.fromReader(JspFilesystemResource.java:169)
     at oracle.jsp.runtimev2.JspPageCompiler.fromReader(JspPageCompiler.java:345)
     at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:250)
     at oracle.jsp.runtimev2.JspPageCompiler.compilePage(JspPageCompiler.java:171)
     at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:338)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:481)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
     at com.a2i.industrial.servlet.HelloServlet2.doGet(HelloServlet2.java:21)
     at com.a2i.industrial.servlet.HelloServlet2.doPost(HelloServlet2.java:14)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:108)
     at oracle.portal.provider.v2.render.http.ResourceRenderer.renderBody(Unknown Source)
     at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
     at oracle.portal.provider.v2.DefaultPortletInstance.render(Unknown Source)
     at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
     at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
     at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
7/15/03 10:43 AM industrial: ERROR: ResourceRenderer.renderBody - Resource "/servlet/HelloServlet2" returned HTTP Status: 404. Error message: OracleJSP:
java.io.FileNotFoundException: C:\ora9iasp\j2ee\OC4J_Portal\applications\_industrial\industrial\servlet\HelloServlet2 (The system cannot find the path specified). Content returned follows....

Thanks for you help David. I changed my code from getServletContext().getRequestDispatcher(jspPage).forward(req, res) to getServletContext().getNamedDispatcher(jspPage).forward(req, res). It worked but I run into the same problem with jsp:include.
I am using the July 2003 of the PDK. I followed the direction for installing version 2 but I did not redeploy with the new jpdk.ear since one was already deployed. After redeploying with the new jpdk.ear, it fixed the jsp:include problem I was having. The problem with using getServletContext().getRequestDispatcher(jspPage).forward(req, res) STILL exist. I am not sure what the deal is.
Oh, I also tried the code below and it doesn't work.
path = req.getContextPath() + jspPage
getServletContext().getRequestDispatcher(path).forward(req, res)
In any case, using getNamedDispatcher() is working fine. I am still curious about getRequestDispatcher() though.

PowerShell-EWS How to use .Forward Method of EmailMessage Class

Hello,
im new to PowerShell and EWS and would like to know how to forward an E-Mail with the .Forward Method of the EmailMessage Class.
Is it possible to also forward an Email with an FileAttachment?
I already have access to the Messages i want to forward but i cant figure out how to .Forward these Messages.
Thank you for your help
Greetings
Ingo

>> Is it possible to also forward an Email with an FileAttachment?
Yes doing a normal forward is EWS should maintain the attachment on the message eg the following would forward the last email in the Mailbox
$folderid= new-object Microsoft.Exchange.WebServices.Data.FolderId([Microsoft.Exchange.WebServices.Data.WellKnownFolderName]::Inbox,$MailboxName)
$Inbox = [Microsoft.Exchange.WebServices.Data.Folder]::Bind($service,$folderid)
$ivItemView = New-Object Microsoft.Exchange.WebServices.Data.ItemView(1)
$fiItems = $null
$fiItems = $service.FindItems($Inbox.Id,$ivItemView)
$messageBodyPrefix = "This is message that was forwarded by using the EWS Managed API";
$addresses = New-Object Microsoft.Exchange.WebServices.Data.EmailAddress[] 1
$addresses[0] = "[email protected]";
$fiItems.Items[0].Forward($messageBodyPrefix, $addresses);
If your looking to forward the actual message as an attachment you can use something like
http://gsexdev.blogspot.com.au/2013/07/forwarding-message-as-attachment-using.html
Cheers
Glen

How to verify whether the persistence unit objects are persistent or not?

How to verify whether the persistence unit objects are persistent or not?
I have successfully configure and deploy the Employees object as a persistence unit in Oracle Coherence according to the guide of Chapter 6 of Tutorial for Oracle Coherence 3.5.
Using the RunEmployeeExample script, I have got the right results. I can see that after the cache object is updated, the database table (Employees) is also updated accordingly. The following is the output:
2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
er 1
2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
nior member 1
2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
Cache: sending ServiceConfigSync containing 258 entries to Member 2
2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
tion due to 1 pending configuration updates
[EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
[EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
t of 257 primary partitions to member 2 requesting 128
2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
equest
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
1
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
or member 1
2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
128 partitions
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
enior member 1
2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
mber 1
2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
ior member 2But I cannot verify if the persistence unit is still persistent.
Edited by: jetq on Nov 5, 2009 11:49 AM

I start a Coherence Console in another Windows Command Prompt as the following:
D:\coherence\bin> coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-11-05 11:57:22.167/9.734 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined th
e cluster with senior service member n/a
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Failed to satisfy the v
ariance: allowed=16, actual=20
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Increasing allowable va
riance to 17
2009-11-05 11:57:22.677/10.244 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Time
stamp=2009-11-05 11:57:22.392, Address=192.168.8.80:8089, MachineId=24656, Location=process:460, Role=CoherenceConsole,
Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(Id
=1, Timestamp=2009-11-05 11:09:09.738, Address=192.168.8.80:8088, MachineId=24656, Location=process:1816, Role=Coherence
Server, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
Management with senior member 1
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
JpaDistributedCache with senior member 1
2009-11-05 11:57:23.108/10.675 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=3): Service Mana
gement joined the cluster with senior service member 1
2009-11-05 11:57:23.759/11.326 Oracle Coherence GE 3.5.2/463 <D5> (thread=TcpRingListener, member=3): TcpRing: connectin
g to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=4168,localport=8089]}
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}The previous output shows that this Coherence console (the client side) has already joined the JPA server.
But the following output shows us that this console cannot access the Employees cache and cannot get the object entry. Why?
Map (?): cache Employees
2009-11-05 12:11:41.653/869.220 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=3): Loaded cache configuration
from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
2009-11-05 12:11:43.055/870.622 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache, member=3): Service Distribu
tedCache joined the cluster with senior service member 3
<distributed-scheme>

<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
    <local-scheme>
      <scheme-ref>example-binary-backing-map</scheme-ref>
    </local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (Employees): list
2009-11-05 12:11:48.402/875.969 Oracle Coherence GE 3.5.2/463 <Error> (thread=main, member=3):
java.lang.RuntimeException: Storage is not configured
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
Storage(DistributedCache.CDB:9)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
uestTarget(DistributedCache.CDB:33)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendParti
tionedRequest(DistributedCache.CDB:31)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.size(Dist
ributedCache.CDB:13)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap$EntrySet.
size(DistributedCache.CDB:1)
        at com.tangosol.util.ConverterCollections$ConverterEntrySet.size(ConverterCollections.java:2720)
        at com.tangosol.coherence.component.application.console.Coherence.doList(Coherence.CDB:74)
        at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:442)
        at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
        at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)Edited by: jetq on Nov 5, 2009 12:18 PM

3.1.3.709: How to Verify and Fix a Possibly Corrupted Design?

How to verify and fix, if necessary, a design that is likely to be corrupted? I first suspected I corrupted file when an attempt to reverse-engineer changes from the relation model to the logical did not work. After some investigation I found datamodeler.log file to which the following error was emitted whenever the reverse-engineer button was clicked: 2013-01-28 11:39:32,001 [AWT-EventQueue-0] ERROR MDBAction - java.lang.NullPointerException. This error message is reproducible. There are also additional warnings in the log whenever this particular design is opened such as [Thread-133] ERROR XMLTransformationManager - Unable to load object from XML: ..../model/dw/rel/A864FBB0-411F4EF06C86/table/seg_0/C4046530-1A69-AD31-6127-390C93D8F7F7.xml java.io.FileNotFoundException. The design has been moved from one Data Modeler version to another over the years. It is currently version controlled by SVN but, alas, I have not been able locate a fully functional copy from the repository. (People usually only use forward engineering from the logical model which appears to work fine most of the time.)
I have investigated the design and located a single table object in the relational model that appears corrupted. It cannot be removed from the design with the DataModeler UI (nothing happend when I click on delete on the object menu). I then checked out a testing copy of the design and manually removed all the files with the object identifier in the file name. Additionally, I searched for xml blocks with a reference to the object identifier and deleted the corresponding blocks from those file. After that the reverse-engineering button began to function again. However, I am afraid of commiting a manually edited design to the repository as I am not certain that I have not broken something else.
What is the recommended way to verify a design and fixing problems in it? Starting a new design from scratch is not an option since there is plenty of documentation within the design that cannot be easily obtained elsewhere. I could recreate the broken objects from the data dictionary if I first had a safe way to identify and delete them from the design.
Best regards,
Miikka

Hi Mikka,
thanks for the info provided.
You can use following script to see wrong foreign keys - in form table_name.fk_name:
log_rep = new Packages.oracle.dbtools.crest.swingui.LogReport(model.getAppView());
log_rep.setName("wrong FKs");
text = "";
fks = model.getFKIndexAssociationSet().toArray();
for(var i=0;i<fks.length;i++){
     fk = fks;
     if(fk.getRemoteIndex() == null){
          text = text + "\n" + fk.getLongName();
log_rep.setLog(text);
log_rep.showModalDialog(new java.awt.Dimension(750, 550));
and following script to remove themfks = model.getFKIndexAssociationSet().toArray();
for(var i=0;i<fks.length;i++){
     fk = fks[i];
     if(fk.getRemoteIndex() == null){
          fk.remove();
Now you can remove the table if you want to. Save design at the end.
Regards,
Philip

Trouble with forward() method in a Servlet

I am new to Servlets and am having trouble with one that queries a database and forwards the data to a JSP. A portion of the code is below (The <i> are really , but are being displayed wrong).
               for(int i = 0; i < numberOfRows; i++)
                    data2[0] = rs.getString("REIMBUR_DATE");
                    data2[i][1] = occupancyPCT;
                    data2[i][2] = rs.getString("RMBR_RATE_REVENUE");
                    data2[i][3] = rs.getString("RMBR_ROOM_TAX");
                    data2[i][4] = "reimbur total";
                    data2[i][5] = rs.getString("BOOK_RATE_REVENUE");
                    data2[i][6] = rs.getString("BOOK_ROOM_TAX");
                    data2[i][7] = "rebate";
                    data2[i][8] = "tax rebate";
                    rs.next();
               request.setAttribute("CERT_INFO", data);
               request.setAttribute("OTHER_INFO", data2);
               request.setAttribute("NUMBER_ROWS", new Integer(numberOfRows));
               ServletContext context = getServletContext();
               RequestDispatcher dispatcher = context.getRequestDispatcher("/certdetails.jsp");
               dispatcher.forward(request, response);
          catch(Exception ee)
               PrintWriter out = null;
               response.setContentType("text/html");
               out = response.getWriter();
               out.println("<html>");
               out.println("<body>");
               out.println("Exception !!<br>");
               out.println(ee.getMessage());
               out.println("</body>");
               out.println("</html>");
When I include the line with the forward() method, I get an exception and the message is "1998-08-20", the contents of data2[numberOfRows - 1][0]. I don't know why an exception is being generated or how it is getting this database value as its message. What's going on?

Nevermind, I found the problem. There was an error in my JSP. I don't know how it affected the Servlet as it did, but...who cares!!

Coded UI: How to verify watermark displayed in the fields and Data grid?

Hi,
I've an requirement to verify watermark in the fields say username field displays "Username" water mark when no data is available in the field and water mark in data grid saying "No data available".
Please observe the water mark displayed in screenshot below:
So how to verify watermark?
Thanks & Regards,
Sunil
Best Regards, Sunil Email: [email protected]

Hello,
Depending on what form technology you are using, you can try posting to one of the following forums:
Windows Forms General
Windows Presentation Foundation (WPF)
ASP.Net forums
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How to use two split this method in my code

How to use two split this method in my code
if i got one string line which like this
("aa!bb!cc~ab!bc!cd") a
nd want to use two split to spare ! and ~ this seal for my spare point how that output
has come diff ?
public static void main(String[] args) {
    String str = "aa!bb!cc~ab!bc!cd";
    String strs[]= str.split("~");
    String strE[]= str.split("!");
    int count =0;
    for(int j=0; j < strs.length; j++){
      for (int i = 0; i < strE.length; i++){
          System.out.println(count + " " + strE);
count++;
the output how can it be like this
0 aa
0 bb
0 cc
1 ab
1 bc
1 cd

Move your second slit inside the first loop, so you are splitting the substring, not the entire string.

How to set up port forwarding on extreme with NAS

I've purchased a NAS (Synology DS211j with 2 caviar HD) over a month ago. Setting up the NAS for wireless connection locally was easy. I've been trying for 3 weeks on how to set-up port forwarding on my airport extreme base. I''ve researched and read countless threads on port forwarding and still cannot grasp the concept and the step by step provided. I need somebody that's patient enough to hand hold and guide me through this frustrating problem.
Equipment:
Comcast cable modem connected into Airport Extreme Base
Synology DS211j connected to Airport Extreme Base
Problem:
Cannot connect to my DiskStation via internet from wherever
confused whether to use FTP or Personal file sharing or whatever is the most suitable for my needs
Just need to access files on my DiskStation view/upload/download from wherever I'm at, whether on PC or Macbook Pro
Thanks in advance!
Marcus

Here are the basic steps to configure your NAS for port mapping:
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the host server>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How to verify my account using my yahoo email? and how to open my apple id in what mail in iphone 4?

how to verify my account using my yahoo email? and how to open my apple id in what mail in iphone 4?

Hi stanlaw,
Welcome to the Support Communities!
The information below should help you with this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
How to verify the primary email address for your Apple ID
When you first create an Apple ID (using your email address) a verification email will be sent to that address. If you sign in to your Apple ID from the link in that email, the email address will be verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
1. Sign in to My Apple ID to manage your account information.
2. Click Resend under Primary Email Address.
3. Verify your changes by following the link in the email you will receive from Apple and signing back in to your account.
I hope this information helps ....
Happy Holidays!
- Judy

How to verify email apple id for ipad?

help me. how to verify email apple id for ipad

Hello, Sororkhanoom.
To verify your Apple ID, Simply follow the link in the verification e-mail that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. If the verification e-mail has not been received, go to https://appleid.apple.com. You will then need to sign in to manage your account. Once you are signed in to your account you should see the option to "Resend Verification E-Mail".
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
Jason H.

How I can change ma pay method in iTunes if I don't want to use my credit card?

How I can change my pay method y iTunes if I don't want to use my credit card?

The iTunes Store sometimes requires it even if the card wouldn't be charged; if it actually gets charged and you're not trying to gift the songs, ask the iTunes Store staff for assistance.
(113277)

How do i get a list of all Roles defubed under a particular OrganizationalUnit? How can i use LDAPConnection.search method for this?

Sorry for the typographical mistake.
Please read the question as:"How do i get a list of all Roles defined under a particular OrganizationalUnit? How can i use LDAPConnection.search method for this?"

How to verify Nexus 3548P forwarding method?

Similar Messages

Maybe you are looking for