How to view the sql behind a report.

Hi All,
i am using OBIEE 10.1.3.4.1. while running a report its showing no result. There is something wrong with the join I guess. But still I need to see the sql it generates.
In NQQuery.log its not updating the sql that I am running a report in answer. How Can I view the detail sql behind the report? Is any more settings to do for view the SQl...
Thanks in advance,
Deepak.

Hi Deepak,
go to Settings > Administration > Manage Sessions from front end..
You'll find view log option related to the report you run..
Make sure that you've set loglevel greater than equals to 2 for the logged in user(in rpd level)

Similar Messages

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the sql query generated in query designer..?

Hi experts,
Can i view the sql query generated by the query designer for a query in sap bw?
regards,
ksvsivam

Hi Sivam,
You can definitely view the sql query.
Go to RSRT and give the report name. Then goto Execute+Debug and click on it.
A new window will open, there tick the box Display SQL/BIA Query and the press on the ok button.
Finally click on execute. The Sql query will be displayed.
Hope this helps.
Thanks,
Rahul

How to view the SQL statement generated during execution of the BW Query?

Dear Experts,
I am trying to retrieve data in a SAP BW Query from a Non-SAP system.
I think if I am able to see the complete SQL statement that was generated when I executed the BW Query, I may be able to use it to retrieve the data.
Do you know how and where I can see the SQL statement of a BW Query's SQL statement?
I tried RSRT options to execute the Query but still could not find the SQL statement.
Thanks in advance.
Regards,
Shunhui.

hi
goto rsrt
give your query name
select execute + debug option
in the debug option under data manager check the check box "display SQL/BIA query
selcet continue
you can see the sql statement
thanq

How to view the sql queries generated by EJB (CMP)

Hello,
I'm using Oracle9iAS (9.0.2.1.0) Containers for J2EE (build 020827.1652) & Oracle 8.1.7 database.
I have a CMP that has about 400 fields and the corrsoponding table has about 800 fields. I'm able to call create and add a row in database.
Now when I call update method to set the remaining fields of this row (I get the proper instance by calling findByPrimaryKey()) I'm getting an exception ORA-00957 duplicate column name.
I'm using reflection to set all the fields by passing my update method a HashMap and setting those fields that this HashMap contains. And as HashMap cannot contain duplicate keys the possiblility of having duplicates is eliminated.
But why am I getting ORA-00957 duplicate column name.
Is there a way I can configure somehow to view what sql query is being generated by the OC4j container when its firing this query to update the database table.
Any help will be greatly appriciated.
Vipin.

Install IronTrack SQL as described in the following link
http://www.irongrid.com/documentation/irontracksql/install.html#install_oracle9iAS

How to change the SQL-Query in (Report in ReportViewer) by running Java App

Hello,
Ich have an App which generates dynamicly SQL-Queries. By pressing a button it should generate a report with this generated Query.
I´m using the ReportViewer.jar. Further is it possilbe to a extra parameters form app which are not in a DB?

There are a few ways that you can achieve this. If your SQL Queries have their filters modified (ie. WHERE clause) then this can be easily solved by adding report parameters to the Report filter. Search the in-product help for "Record Filter" and you should get a number of helpful resources returned.Additionally, you can pass in java.sql.ResultSet objects with a populated recordset of the data you want to show in the report. We don't currently provide any tools to assist the creation of the code stubs for thick-client applications (like we do for JSP pages) however you can download a collection of thick-client sample code from here:<a href="http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip">http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip</a> As I mentioned, this sample contains a collection of code snippets. The one in particular you will be interested in is titled "JRCResultsetDatasource". Hopefully, this will provide you with a few options. Regards, Sean Johnson (CR4E Product Manager)

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to center the content in crystal report viewer?

open crystal report viewer in winform, default at the left top
after maxmium the winform window, content become at the center
another odd thing is that i set window winform size 1208*1024 and crystal report view is fill
then tried, content is not center any more
How to center the content in crystal report viewer in code?
Edited by: Mathew_666 on Oct 6, 2011 5:20 AM

Since there is no control for center you'll need to do the math on your own. This is just a rough draft, but you'll get the idea.
One of the things you'll need to figure out is your buffer to help you give a centered feel. We'll say that value is 50 in this case.
Height
int buffer = 50;
int formHeight = 1000; // we'll assume a height of 1000 in this case
int crystalTop = buffer;
int crystalViewerHeight = formHeight - (buffer * 2); // buffer is at the top and bottom
Width
int formWidth = 1000; // we'll assume a width of 1000 in this case
int crystalLeft = buffer;
int crystalViewerWidth = formWidth - (buffer * 2); // buffer is at the top and bottom

How to view the History of a Crystal Reports iView in EP6?

How to view the History of a Crystal Reports iView in EP6?
Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
Our users would prefer to see a listing of the past runs of the report and choose which report to view. What parameters need set in the EP6 iView to see the history of a report?

Hi Heather,
it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
the link to our developer library :
http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
hope this helps
Ingo

When and how to update the "saved data" in report ?

Hi,
The BO version is "BusinessObjects Enterprise 12.0"
The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
How to view the update data while click the "View" in CMC/InfoView ?
I have tried to schedule it , then can see the update data in "View the latest instance".
Is there any approach to refresh/update the saved data in the report ?
Thanks and regards,
Forest
Edited by: Forest lin on Dec 5, 2008 12:12 PM

Hello Forest lin,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

How to view the table at the application level

Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
Mahesh

Hi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
 FIELD,
 END OF W_ZMARD.
EXEC.
 OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
 FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
 EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max

How to view the Invoice

Hi
Can anyone explain me like how to view the Customer and vendor invoices through T.Code or through path.
Thanks & Regards

hi,
you can view the customer & vendor invoice by giving the FI document number in FB03. Then you can Go for Environment - Document Environment - Original Document. This will take you to the Customer invoice which was raised in the SD module. or vendor invoice which was raised in the MM module.
you can follow the same process from the FI report : FK10N for vendors & FD10N for Customers.
hope its useful.
regards,
R.Ramakrishnaraj

How to get the usage of SSRS reports in project server 2010

Hi
Can any body tell me how to get the usage of the SSRS reports in Project Server 2010.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hello,
See the links below on how to get the usage for SSRS reports:
http://sqlbadboy.wordpress.com/2013/09/12/reporting-services-reports-whos-using-them/
http://www.mssqltips.com/sqlservertip/1908/analyze-report-execution-and-usage-statistics-in-sql-server-reporting-services/
http://www.mssqltips.com/sqlservertip/1306/how-to-know-what-reporting-services-reports-are-being-used/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to identify the SQLs which are using the tables and new columns

Hi
I m using oracle 10G Database in windows. Developers have added some columns in some of the database tables and were asking to check whether there is some impact on performance or not. I have not done this performance tuning before. Kindly help me how to proceed further.
How to obtain the sqls which are touching the tables and the new columns? It would be really great if you can help me with this.
Thanks

You can try to use DBA_DEPENDENCIES to get PL/SQL objects using tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_1041.htm#i1576452.
However if SQL code is not stored in database in a trigger, a procedure, a function, a package or a view, it is impossible to retrieve all SQL code referencing some table from database dictionary: for this you would have to analyze application source code.

How to view the sql behind a report.

Similar Messages

Maybe you are looking for