How we use the rights on LOV

Hi,
How we use the rights on LOV to filter.

What you need to do is to edit the LOV sql (assuming it is custom folder) and insert there some
kind of security mechanism.
Also you can create dependencies in the parameters so that if you will select on the "Region" parameter the value of "New York" when opening the values for "Departments" you will get only the relevant departments.
This can be done in the parameters definition, you can choose there to limit the results according to another condition. (note that it might create some performance issues)
Tamir

Similar Messages

I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'

'''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''

If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

How to always rotate objects around the same point, even using the right-click menu?

I need some of my objects to always rotate around the same point. How can I select a point which will stay that way?
Using the rotate tool resets after deselecting.
Also, I'd like to rotate objects around a certain point even when using the right click > Transform > Rotate.
Is it possible?

Right, so this is where Illustrator falls short with respect you your need, but only in the sense that the reference point can't be made to stick. You can, however, use Smart Guides to make it so the point is easy to set at exactly the same location, (especially since your object has an anchor point there), manually before each rotation.

I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way. How can I fix this?

I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way.

Tools > Options > Content : JavaScript > Advanced > Allow Scripts to: [X] "Disable or replace context menus"

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to use the Dynamic Expression in BRFplus

Hi Experts
               I am new to BRFplus. Can you give any document on BRFplus how to use the Dynamic Expression.
Thankyou
Venkat

OK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis

How to use the transformation matrix in Placed Suite.

I am in trouble how to use the transformation matrix Placed Art (PlacedSuite ).
       AIRealMatrix rasterMatrix;
AIRealMatrix placedMatrix;
if (artType == kRasterArt {
     error = sAIRaster-> GetRasterMatrix (art, & rasterMatrix);
} else if ((artType == kPlacedArt) {
     error = sAIPlaced-> GetPlacedMatrix (art, & placedMatrix);
When I converted to using the transformation matrix of PlacedArt, the target art could not be converted to expect.
I could convert in case of the RasterArt. (The reference point of the transformation matrix of RasterArt is (0,0).)
In the PlacedArt, preference point is not (0,0)?
The tx/ty of the transformation matrix of PlacedArt is not correct?
In the transformation matrix of RasterArt and Placed Art, how are those two different?

The short answer is "no", (0, 0) is not the origin of placed art (unlike kRasterArt). Off the top of my head, I believe when you place art, its original state is upside-down and flipped horizontally in the upper-right of the artboard. If you want to see where it starts, simply create an identity matrix and apply that as the matrix for the kPlacedArt and you'll see how it starts. Yes, its pretty crazy.
minimum99 posted some code that might help. I haven't tried it (I rolled my own years ago) but I'd give it a whirl:
http://forums.adobe.com/message/3195790#3195790

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
Explanation :
In the Adobe Director screen, this DIR file game is worked 100%.
I tested right click EVERYWHERE... NOTHING HAPPENS.
Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
THEN, I published it into EXE...
I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
this does not happened in the DIR file...
I didn't make a runmode program or anything else.... This is awkward... mystery for me...
WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
I have used Director for years.... This is really strange for me...
>>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
THIS ONE is useless.... It doesn't prevent the rightmouse click,...
      on rightmouseup me
             nothing
     end
      on rightmousedown me
             nothing
     end

Dear Adobe Forums friends
I need your help and guide through this problem...
In the game's dir file that is run on the DIRECTOR softwawre,
the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
LATER THIS GAME TURNED INTO EXE.
It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
The right clicks that goes error are above the picture of numeric button only. (in DIR file
this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
1. I wonder why there are differences in DIR and EXE effect
2. Why right click? Left click effects are all normal.
3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
NB: this game uses Buddy API Xtras, File IO Xtras.
Thx
David S

How to use the built in TV tuner in a GX 600???

Hi to everyone.
I would like to know how to use the built in tv tuner card in my gx 600.. I tried but it didnt detect any signal for tv..I wondering if I am doing something wrong. Your knowledge will be greatly appreciated.Thanks.
GX600 owner.

I am in Asia particularly in the Philippines Sir.
Yes I do see it in device manager labeled DVBT hybrid TV device. I think thats the tuner card right?
The program I am running to configure it is Windows Media Center, I am using a windows 7 OS..I connected the portable antenna and tried also a tv antenna but when it scans for signals it tells me it cant see any signal or channel at all.I am in a place where TV's connect to a channel even though your just using an aluminum tube..so signal is really good so I cant seem to figure out why it cant detect any..T_T.Thanks for your response sir..greatly appreciated.

How to use the Function module 'BAPI_APPRAISAL_GETDETAIL'

hello friends,
I have to create the report which displays appraisee name, appraiser name,reviewer name and result.Using BAPI_APPRAISAL_GETDETAIL we can get the above all.But i don't know how to use the above function module.If anyone have used in their program could you please send me or anyone have idea how to do that Please help.It is very Urgent Help me.
Thanks in advance,
Regards,
Ashok.

Hi,
I do not hae the code but i can tell you how you use the FM and get the required data, please follow the below mentioned steps:
1) In this Bapi you need to pass the Plan verison and Object Id data in the BAPI Import parameters and while passing the these values need to decalra the data variables same (of use the same reference fields as they are in Bapi import fields)as they are Bapi importing data fields.
2) decalre the Internal Table structure as they are in the Export and Table parameters.
3) Assign the decalred Import and Tables structures to the BAPI FM.
4) once the Bapi is run with the Import parameters data the Apprisal data and Apprisee data will returened in the import and table structures and also return value wll be imported.
5) now using the Structures which are in Import and Table decalrations in the FM you can retrieve the data by reading them.
Do let me know if you need any more details in this regard.
Raghotham Reddy.
If you find this is the right solution then allocate reward point.

[svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

Revision: 13113
Revision: 13113
Author: [email protected]
Date: 2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
 osmf/trunk/libs/ChromeLibrary/.flexLibProperties
 osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
 osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
 osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
 osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
 osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

Using the right mouse button with JTables

Hi Folks,
Can someone describe how to allow the right mouse button to select rows in a JTable? Or can someone tell me how to access the code which is activated when the RMB is clicked on a JTable so I can copy it.
Thanks.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F). 
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear. 
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.

How to use the MAC Keyboard

Can anyone point me to a tutorial or posting which explains how to use the keyboard?
I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
eg:
How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
Under the F16 key there is a box with a cross through it. What does that do?
WHy are F5 and F6 blank?
What does the big key on the very right bottom do?
I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
Many thanks

jhrichmond wrote:
Can anyone point me to a tutorial or posting which explains how to use the keyboard?
I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
eg:
How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
System Preferences>Keyboard; Set it to use Function keys as F1, F2, etc.
What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
I just loaded the UK Apple store and compared the keyboards to the ones at the US store. I guess since you are so "international" over there, you get pictures instead of words. My guess would be Home, End, Page Up and Page Down
Under the F16 key there is a box with a cross through it. What does that do?
Clear key for the numeric keypad.
WHy are F5 and F6 blank?
No additional functions assigned to them.
What does the big key on the very right bottom do?
Enter key for the numeric keypad.
I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
I think Apple thinks based on where you live, you understand pictures instead of words. Probably cheaper to make one keyboard than ones for each language.
Many thanks
Edit: Almost forgot. MAC is an acronym for Media Access Control. A Mac (short for Macintosh) is a personal computer made by Apple.
Message was edited by: Barney-15E

How we use the rights on LOV

Similar Messages

Maybe you are looking for