How we will multiple trans in bdc
how we will multiple trans in bdc what r the possile combination like one is bck n one in no disply mode how error can handle
Hi
We have different data sources for sales order header, sales order item level, delvivyer hedear level, delivery item....
The data will be updated based on Sales order number, delvery number etc..
Whatever changes you do a sales order, it has a unique number. WIth this as primary key all the related updates are maintained.
Even for sales order item detail, we refer the header number of sales order and do the updates
*if useful******
Thanks
N Ganesh
Similar Messages
-
HOW TO HANDLE MULTIPLE VALUES IN BDC FOR A PARTICULAR FIELD.
I THINK IT IS HANDLING OF TABLE CONTROLS IN BDC
PLEASE LET KNOW WHETHER THESE TWO ARE SAME CONCEPT OR NOT
HOW TO HANDLE TABLE CONTROLS IN BDC
Moderator message - Please do not use all caps. Please do not ask interview questions - post locked
Edited by: Rob Burbank on Jun 26, 2009 10:02 AMHi,
To handle table control in BDC you will have to enter at least one record in the table control and there after use the index number to increment to the next line item.
Say you run a recording for a transaction which has a table control (ME21), here after you have completed the recording, you'll see the code which will have sometjing like <fieldname>(01) and the entered value. that valeu has been entered as the first line item (01 being the index).
You will have to replace the hard coded line item index with a variable and inside a loop increment the item index. Once you reach the maximum allowed line items on your screen juct press the pagedown button (or insert new row) and reset the index to 1.
Following is a code snippet I used while uploading data for ME31K (vendor contract). It is not the complete code but does show how your code needs to be changed with using index for line items.
Here we assumne that the maximun number of lines displayed at a time on the screen is 14.
<< Unformatable code removed >>
Hope this helps.
Regards,
Sachin
Edited by: Rob Burbank on Jun 26, 2009 10:03 AM -
How we will maintain screen resolution for tmaintaining able control in BDC
how we will maintain screen resolution for tmaintaining able control in BDC. can you give the code or how we have to set it
Hi,
You need to use the CTU_PARAM options with the call transaction method.This is used if you would like to do a commit work once call trnasaction is done. This has also got very important property, for example if your Screen resolution is different from others then the screen (Application) will be different that is you'll be having say 5 lines in your screen where as your friend will be having 8 or 10 so your program might fail in this case. If you set variable DEFSIZE as 'X' it will always use the default screen size and hence avoids error.
Use CALL TRANSACTION 'XXX' OPTIONS FROM w_ctu_params.( type CTU_PARAMS)
This structure contains the follwing.
DISMODE : Display mode (like the MODE addition)
UPDMODE: Update mode (like the UPDATE addition)
CATTMODE: CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
RACOMMIT: Do not end transaction at COMMIT WORK
NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND : No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
This might help u in better understanding...
Re: regarding bdc
Re: ctu_params
Regards
Sudheer -
How we will use date n currency fields in bdc
how we will use date n currency fields in bdc
Hi
When you have to upload using BDC, always use char type fields.
For date, use date(10) type c.
write sy-datum to date. Date will be as per using setting, either mm/dd/yyyy or dd/mm/yyyy...
For currency also, you need to declare as
data1(15) type n and
data2(15) type c.
Now suppose you have a value 12545421.91 . As per user setting it can be 12545421,91.
In this case, first push the value to NUMC type.
data1 = 1254521.91 and then data2 = data1 / 100.
This will change it in required format and can be populated in the bdc table.
Regards
Navneet -
How to uploade multiple flatfiles for single transaction using BDC?
How to uploade multiple flatfiles for single transaction using BDC?
Hi,
You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
Then loop at the internal table and call BDC transaction to process the data.
Regards,
Ferry Lianto -
How to insert multiple line items in fv60 using bdc.
Hi all,
How to insert multiple line items in fv60 using bdcshi
chk this
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
V_PEINH(30).
DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
DATA : BEGIN OF ITAB OCCURS 0,
IND(02),
LIFNR_001(010),
data element: BSART
BSART_002(004),
data element: BEDAT
data element: EKORG
EKORG_004(004),
EKGRP_006(003),
data element: LPEIN
LPEIN_005(001),
data element: EMATNR
EMATN_01_007(018),
data element: EWERK
WERKS_01_008(004),
data element: EPEIN
PEINH_01_009(006),
data element: EWERK
MENGE_01_013(017),
data element: AUFEP
EBELP_014(005),
data element: AUFEP
END OF ITAB.
START-OF-SELECTION.
FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT ITAB BY IND.
START-OF-SELECTION.
LOOP AT ITAB.
REFRESH IT_MESSAGES.
<b>V_IND = V_IND + 1.</b>
<b>AT NEW IND.</b>
<b>READ TABLE ITAB INDEX SY-TABIX.</b>
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0100'.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
ITAB-LIFNR_001.
PERFORM BDC_FIELD USING 'RM06E-BSART'
ITAB-BSART_002.
*perform bdc_field using 'RM06E-BEDAT'
ITAB-BEDAT_003.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
ITAB-EKORG_004.
PERFORM BDC_FIELD USING 'RM06E-LPEIN'
ITAB-LPEIN_005.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
ITAB-EKGRP_006.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDAT.
<b>PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
PERFORM BDC_FIELD USING V_EMATN
ITAB-EMATN_01_007.
CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
PERFORM BDC_FIELD USING V_WERKS
ITAB-WERKS_01_008.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING V_PEINH
ITAB-PEINH_01_009.
*CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using V_MENGE
ITAB-MENGE_01_013.
*CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
ITAB-EBELP_014.</b>PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
AT END OF IND.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BU'.
ENDAT.
CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
IF FLAG = 'X'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'GAMY_FAILURE'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR FLAG.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'ME21'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = 'EN'
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
WRITE : / V_MSG.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
ENDLOOP.
IF FLAG NE 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA. -
Hi everyone
I have multiple questions on BDC.Would u please answer them with explanations ASAP...
1. How do you create a batch input session for a transaction?
a) We create a bdc and use ‘call transaction’ in background mode.
b) We create a bdc and use ‘call transaction’ in error mode.
c) We create a bdc and use ‘bdc_insert’ for the transaction.
d) None of the above.
2. What is the alternative to batch input session?
a) Load module
b) Call transaction
c) BAPI
d) Idoc segment
3. Which SAP table stores the BDC session queue information?
a) APQD
b) APQL
c) APQQ
d) APQI
4. Which program can be used to release BDC sessions within a job?
a) RSBDCSUB
b) RSBDCJOB
c) RSSUBBDC
d) BDCRECXX
5. Which one of the following is output to the job log when included in an ABAP program running in the background?
a) Write statements
b) message statements
c) report parameters
d) Submit statements
6. Your program specs call for you to read the first 10 records from a text file (fname1), and write them out to another text file (fname2).
Which block of code will accomplish the result desired in the above scenario?
a) Open dataset fname2 for input in text mode.
Do 10 times.
Read dataset fname1 into hold_var.
Transfer hold_var to fname2.
Enddo.
b) open file fname1 for output.
Open file fname2 for input.
Read dataset fname1 into hold_var 10 times.
Transfer hold_var to fname2.
c) open file fname1 for input.
Open file fname2 for output.
Do 10 times.
Read file fname1 into hold_var.
Transfer hold_var into fname2.
Enddo.
d) open dataset fname1 for input in text mode.
Open dataset fname2 for output in text mode.
Do 10 times.
Read fname1 into hold_var.
Write hold_var to fname2.
Enddo.
7. sy-dynpro is
a) screen no
b) program
c) table
d) field name
8. Which of the following are NOT correct usage of BDC_cursor?
a) To position the cursor on a particular field.
<bdc_tab>-FNAM = 'BDC_CURSOR'.
<bdc_tab>-FVAL = ‘fieldx’ .
b) To position the cursor on a particular field.
<bdc_tab>-FNAM = ‘fieldx’
<bdc_tab>-FVAL = 'BDC_CURSOR'. .
c) For fifth row of Table control
<bdc_tab>-FVAL = 'fieldx(5)'.
d) For fifth row of Table control
<bdc_tab>-FNAM = 'BDC_CURSOR(5) '.
9. In case of background processing of a BI session, which authorization is checked?
a) Developer of the program that schedules BI Session
b) User who executes the BI session
c) User who executes the program that schedules BI Session
d) User ID that is passed to the BDC_OPN_GROUP function module inside the calling program
10. Which of the following are TRUE about Transaction Recorder?
a) Transaction Code is SHDB
b) Transaction Code is SM35
c) It can generate ABAP code for the BDC program automatically
d) It can generate ABAP code for the Call Transaction program automatically
Regards,
PratibhaHi,
1) C We create a bdc and use bdc_insert for the transaction
2) b) Call transaction
3. d) APQI
4. a) RSBDCSUB
5. b) message statements
6. d) open dataset fname1 for input in text mode.
Open dataset fname2 for output in text mode.
Do 10 times.
Read fname1 into hold_var.
Write hold_var to fname2.
Enddo.
7. a) screen no
8. b) To position the cursor on a particular field.
<bdc_tab>-FNAM = fieldx
<bdc_tab>-FVAL = 'BDC_CURSOR'. .
9.b) User who executes the BI session (or)
c) User who executes the program that schedules BI Session
10. a) Transaction Code is SHDB
c) It can generate ABAP code for the BDC program automatically
Regards -
How to select multiple lines in reports
Hi,
how to select multiple lines in a reports and process those selected lines to other activities like BDC.
Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
Point will awarded.Hi ,
the o/p in ur case will be a basic list output with a check box enabled in the left .
Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
And i press a button to submit this to the BDC .
Here u need to make use of
READ LINE statement to read the records from the list output and then pass them to the BDC .
The code would be something like this
DO .
Read line index <field> where checkbox <> ' '.
ENDO.
You can have a look at the F1 help on read line . This will mkae u clear .
Hope this gives u an idea.
Regards,
Vijay. -
hi.. sdn experts...
how to process the multiple applications in bdc ....tell me one scenario..Hi,
Multiple transactions can be processed in BDC by calling them seperately in your program.
One scenario can be creating an Equipment and their dependent components.
We write one BDC to create the components and another one to create the equipment.
Such a scenario comes when your client is purchasing a server along with its related components.So, the server as well as the components will have to be created into the SAP system and then the components will be linked to the server. So, there will be 3 BDCs involved.
Reward points if found useful...!
Cheers
Abhishek -
How to have multiple windows of same app under JSF 1.1
I know this has been addressed in JSF 1.2, but does anyone have a good solution in JSF 1.1 concerning how to allow multiple application instances to be opened in different browser windows at the same time? I work for a large financial services company and we have multiple instances of the same application up when working with more than one customer or account at the same time.
We�ve figured out a way to use a custom variable resolver and property resolver to provide an application instance scope that works with managed beans; however, we are struggling with how to handle the JSF component tree. We can replace the StateManager or ViewManager, but we will be running under a vendor implementation of JSF and do not want to outright replace their implementation. We wanted to simply define our own manager, decorate the viewId with additional information, and then pass it on to the default manager. The big issue is that while the restoreView methods take the viewId, the writeState methods do not. This seems like a pretty big show stopper to us. If we have to wait until JSF 1.2, it will be a long wait. Any ideas?
Thanks.The way I'm thinking of doing this is to use nested beans. So for example, I'd have an "AccountBean" written as a JSF managed bean, but this is not what I'd declare in faces-config. Instead, I'd have an "AccountMgr":
<managed-bean>
<managed-bean-name>acctMgr</managed-bean-name>
<managed-bean-class>AccountManager</managed-bean-class>
</managed-bean>AccountManager would have a map of AccountBean objects. In my pages, I'd reference the acctMgr:
#{acctMgr.accts[acctEditor.acctId].firstName}If anyone has a better idea, I'd love to hear about it. -
How to setup multiple base station under one network?
How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?
One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.
-
How to allow multiple domains under Access-Control-Allow-Origin
Hi,
We have a domain where will get CORS request from another domain hosted on seperate DC. We can't set
Access-Control-Allow-Origin as * due to security concerns & IIS can't take more than 1 value at a time. Kindly suggest how to pass multiple httpheader for
Access-Control-Allow-Origin.
Regards,
DhirajHello Dhiraj,
This is not the suitable forum for your question, you may post in
IIS forums for more help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
[UIX] How To: Return multiple values from a LOV
Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
model="${bindings.DepartmentId}"
id="${bindings.DepartmentId.path}"
destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
model="${bindings.DepartmentId}"
id="DepartmentId"
destination="departmentsLov.uix"
partialRenderMode="multiple"
partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
id=DepartmentName
model="${bindings.DepartmentName}"
columns="10"
disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
<compound>
<set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
<set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
</compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
<compound>
<set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
<set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
</compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido -
How to play multiple CDs from Music list
This may sound really dumb, but I can't figure out how to play multiple albums in the latest iTunes. I have to drag them over to a Playlist then check all the individual songs. Is there a way to gang up multiple albums and get them onto Up Next by just selecting from Music? Sometimes only the first song will play when I double click an album. This would be similar to playing three CDs from your home stereo, for instance. Can this simple task be performed from ITunes, please??
Basically right click the artits in that left column and select Add to Up Next.
You can also select individual albums by right clicking the album cover a little to the right and choosing the same option. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.
Maybe you are looking for
-
How can i do it with JSP - dealing with multipart/form-data?
Hi guys, i have a form in which one of its components is a optional file that can be uploaded to the server. Up here, no matter... I thought that i could evaluate the file size, so i would avoid upload process which size was bigger than something, li
-
I scanned an Item from my computer to my documents. The scan was completed. However, when I searched in my documents, the Item was not there. Where can I find the item scanned?
-
Buttons on toolbar do not work in Microsoft Office 2003 programs.
I am using Adobe Acrobat Elements 6.0. My toolbar buttons do not work in any of my Microsoft Office 2003 programs. I can Print file and change the print file to Adobe PDF to convert, but it would be nice to be able to use these buttons on the tool
-
SEARCH (only returns one record?)
When I run my search, it only returns the first record it finds. Can sombody give me a clue to why it won't return multipule records? try{ //Connect to the Database Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); Connection con = DriverManager.getConn
-
How would you design this: You have a table REV of revenues per day (date PER and number REV). There may be more than one row per day (let's say one for each order). You have to make BC4J that give you access to the single rows for retrieval and upda