How would I create a continues shape that has a drop shadow?

I found these photos and would like to know how they where made. I have a concept for a poster that would need a number of shapes with this treatment. TX

Zeno Bokor wrote:
upload the files using the camera icon, the Attach Files command is buggy
Buggy just like the rest of this Jived up forum.

Similar Messages

How do I create an excel file that has the volume output and the time at which it occured?

Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
Hello:
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
RATETEST.vi ‏202 KB

Let me start by answering the specific question, and then I will provide some suggestions on the code.
The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
As for the code:
As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear.

How would I create a wheel shape

Hi, I am new to Illustrator
I was wondering how I would create this shape in Illustrator CS3
I have scanned this in in Photoshop but it ain't pretty. I need a clean full version with no gaps and slightly rounded corners. I would be grateful if someone could take the time to explain step by step. Thanks in anticipation

Pie Chart Method this will give you a general idea it requires expanding and use of the another ellipse and deleting path segments.
It is a long story but takes only about ten minutes because you will make some mistakes. And in the end I outlined the strokes
Here is the transform way using two strokes acting as radii and overlapping two concentric circles using the path finder or Live Paint features.
Coloring some stroke with a color of none. You can then expand that. I don't have a screen shot of this method.
Here is with the Polar grid it would really be good that made geometry like this that could easily be updated I think they are called primitives.
A feature long need by Illustrator.

How would I create a simple script that does these specific things?

I am trying to create a script that does these few simple task but I can't seem to compile all the cmdlets together into one. I can pick one task out and have a command for it but I want one script to do it all. Here are the tasks I need it to do.
store the current location (as in C:\scripts)
test to see if a folder C:\output exists, if it does not, create it
prompt the visitor for a folder name (no C:\)
obtain a directory listing of that folder showing all .ps1 files only
place the results of this listing in a file named PS1_files_[folder name].txt in the c:\output folder
repeat this task as part of a loop until an empty string is entered
restore the present location (for example C:\scripts)

This is a very good script for a someone new to computers to use as a learning exercise. You will learn how the computer works an learn how to use scripts to manage the computer.
This is the excat kind of scritp a teach hands you to do on the first day of class. THe challenge will help you learn.
Start here to learn how to write a script:http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Good luck. Post back with specific questions. Do not forget to include your script and the complete error message.
You need to learn basic computer logic and decision making. The learning materials will step you through that.
¯\_(ツ)_/¯

How would one Create a "Custom Cursor" that can move BEHIND certain layers?

In terms of Flash expertise I am on the the doddering divkid level -- but have mananged to create a custom cursor; a hand that I want to move about over most layers but under one specific layer. Currently, no matter the layer order, when published the cursor image jumps straight to the top.
Is there a property I can imbue in the would-be "top" layer or a way of editing or modifying the custom mouse cursor actionscript that would bring about the desired result?
Many thanks in advance for your time and expertise...........................peace

you can easily attach the cursor between the specific layers you want using an empty movieclip and add your cursor movieclip to the emptyMC using the class name. Look at the screenshot and follow the code. it works
and here is the code:
import flash.display.MovieClip;
var whytehand:MovieClip=new cur();
emptyMC.addChild(whytehand);
emptyMC.mouseEnabled = false;
emptyMC.addEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor_5);
function fl_CustomMouseCursor_5(event:Event)
emptyMC.x = stage.mouseX;
emptyMC.y = stage.mouseY;
Mouse.hide();
Thatz it!

How can I create a video clip that has multiple copies of the same subject playing at the same time? Basically like one person became 50 backup dancers!

Hello Everyone,
I am trying to create a single video clip where my original subject (dancer) is multiplied on the screen many times. Basically I am trying to create a background video for a dance team and want to make it look like an army of the same person dancing behind them. Amy guidance would be great!
Thanks
Madisonman 2013

Motion ($50) can do this with a replicator.
Russ

How do I create a configuration profile that has wireless settings including a manual proxy server.

I can configure the wireless network using the IPCU but cannot set the proxy server settings.
I'm sure that this is simple but just can't work it out!

IPCU does not currently allow entry of proxy server settings. This must be done, from the device, for each wi-fi network. It would be great if it did.....

How do i create an adobe form that has auto numbering?

Our purchasing department requires a Purchase Requisition that contains it's own unique number so the requisition can be associated with the Purchase Order. Can this type of form be created using Adobe Acrobat?

I need to create the form below and have the requisition number field auto populate and never generate a duplicate.

How do I create a new Style that can be applied to an object?

Under the Assets menu there is a tab called “Styles”. My question is how do I create a new Style that I can apply to an object??? A link to a tutorial or something like that would be useful because I can’t find anything!!! Thanks in advance for helping me eliminate this frustration!!!

KomputerMan.com wrote:
What I want to do is create a library of styles that are basically pictures of various wood types.
There are a couple of approaches you could try.
Clipping paths
1. Draw the part shape as a closed path.
2. Position the image of woodgrain above or below the shape where you want it positioned.
3. Cut
4. Select the closed path.
5. Paste Inside.
See: Using FreeHand MX > Contents > Working with Objects > Working with clipping paths
Tiled fills
1. Use autotrace to trace the image of the woodgrain, using plenty of colors.
Using FreeHand MX > Contents > Using Imported Artwork > Tracing bitmaps > Tracing an image
2. Group the traced paths (but not the image) and create a tiled fill,
Using FreeHand MX > Contents > Using Strokes and Fills > Applying attributes to fills > Using tiled fill attributes
3. Make a style from a tile-filled object
4. Apply the style to other objects.
Judy Arndt

How would I create buttons states for MCs I am creating abstract MCs

I am creating a generic website that would have abstract MCs that would load jpg or TXT fields for the user interface to allow for fast updates to the site. The MCs that would make up the user interface would be empty and load things into it using XML or PHP later on. How would I create button states for the user interface MCs. I started creating a function for every MC button state but I thought there might be a more efficient way.
would creating a array help in this case?
and is using URLRequest the way to link to pages with in a movie well the flash movie that is the site it's self?
/*---------------------------- THE START OF MY ACTION SCRIPT ------------------------------*/
var waywardLogo_mc:MovieClip = new MovieClip;
var theCollection_mc:MovieClip = new MovieClip;
var newsPage_mc:MovieClip = new MovieClip;
var whatthe#$@!doyouwant!?_mc:MovieClip = new MovieClip;
/*---------------------------- onOver ------------------------------*/
waywardLogo_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
theCollection_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
newspage_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OVER,onOver);
/*---------------------------- onOut ------------------------------*/
waywardLogo_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
theCollection_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
newspage_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.ROLL_OUT,onOut);
/*---------------------------- onClick ------------------------------*/
waywardLogo_mc.addEventListener(MouseEvent.CLICK,onClick);
theCollection_mc.addEventListener(MouseEvent.CLICK,onClick);
newspage_mc.addEventListener(MouseEvent.CLICK,onClick);
whatthe#$@!doyouwant!?_mc.addEventListener(MouseEvent.CLICK,onClick);
function onOver(event:MouseEvent):void
event.target.alpha = .5;
function onOut(event:MouseEvent):void
event.target.alpha = 1;
function onClick(event:MouseEvent):void
event.target.URLRequest("");
/*---------------------------- onover, onOut, onClick buttonModes ------------------------------*/
waywardLogo_mc.buttonMode = true;
theCollection_mc.buttonMode = true;
newspage_mc.buttonMode = true;
whatthe#$@!doyouwant!?_mc.buttonMode = true;

click insert/new symbol, tick movieclip, assign a name, tick export for actionscript and in the class textfield enter a name (say ButtonClass) and click ok.
attached to the first frame of your new movieclip, type stop() in the actions panel. put whatever graphic you want on-stage for your button's up stage. create another keyframe, label it "over" and put whatever graphic you want for button's over state on-stage.
in a layer above those graphics, you'll probably want to add a dynamic textfield so each of your buttons can have different text. assign the textfield and instance name (say tf) and extend its timeline to the last frame of your movieclip button.
then when you want to create a button, on your timeline you can use:
var b:ButtonClass=new ButtonClass(); // these two lines need to be entered for each button
buttonhandlerF(b,someX,someY);
//-------code between dotted lines only needs to be entered once no matter how many buttons you add --------------------
function buttonhandlerF(b:ButtonClass,x:Number,y:Number){
b.addEventListener(MouseEvent.MOUSE_OVER,overF);
b.addEventListener(MouseEVent.MOUSE_OUT,outF);
b.x=x
b.y=y
addChild(b);
function overF(e:MouseEvent){
e.currentTarget.gotoAndStop("over");
function outF(e:MouseEvent){
e.currentTarget.gotoAndStop(1);
//-------code between dotted lines only needs to be entered once --------------------
// you'll also want to create a click listener and listener function
the code between the dotted lines is amenable to being added to a ButtonClass.as class file if want to expand your capabilities.

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How do i create an itunes account that can only download free apps

how do i create an itunes account that can only download free apps

Follow the instructions here > Create an iTunes App Store account without a credit card

How do I create a pdf file that is 300 dpi in Adobe Acrobat XI?

How do I create a pdf file that is 300 dpi in Adobe Acrobat XI?

PDF files do not have a "resolution" - they aren't images. The pages are a mix of vector art and text, and raster (pixel-based) graphics. The raster items on a page can (and often do) have different resolutions.

How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

You may use slideshow widgets to achieve this. For more details : Adobe Muse Help | Working with Slideshow widgets

How to see the table in se11 that has been created in oracle 10g directly

hi,
how to see the table in se11 that has been created at SQL> prompt in oracle 10g directly ?
is there any procedure to attache directly created table into sap ?

I think you have to create it in SE11 first. Although you can probably use native SQL to access it from an ABAP program.
Rob

How would I create a continues shape that has a drop shadow?

Similar Messages

Maybe you are looking for