HP 3800 switch port-security one mac in two VLAN for Cisco IP Phone

Hellow all!
I'm want use port-security for ports on my HP 3800. But PC connected
to network via PC port on Cisco ip phone. For phone used 10 voice VLAN,
for data - 1 VLAN (native). Cisco phone add self mac-address in these
two VLAN. On Cisco Switch 2960 i resolve this for 4 command:
switchport port-security maximum 3
switchport port-security mac-address pc_mac
switchport port-security mac-address ip_phone_mac
switchport port-security mac-address ip_phone_mac vlan voice
How i can add one mac in two VLAN's on HP 3800 Switch?
Sorry for my English, please ^_^
This topic first appeared in the Spiceworks Community

Hi Kuarzo, please reference the following;
https://supportforums.cisco.com/document/116426/how-configure-dynamic-mac-port-security-sx300
https://supportforums.cisco.com/document/116256/how-configure-static-mac-port-security-sx300

Similar Messages

  • HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

    Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
    Many thanks
    Anthony

    Try this Discussion...
    https://discussions.apple.com/message/18783684#18783684

  • One mac account, two computers

    I have one mac account and two computers. When I get up in the morning, I check my email. When I come to the office I recheck my email.
    With my pop account through my ISP, my mail downloads at both places.
    With my mac account, once I view it at home, I cannot see it at the office. Is there a way to resolve this issue.
    What am I doing wrong?
    SJ

    it's IMAP. then it really should show the same messages on both computers. you can try rebuilding the mobileme inbox (mailbox menu->rebuild). but mobileme is a weird animal and is handled separately from all other accounts in Mail. I don't use mobileme so can't comment further on this, sorry. maybe somebody else who does can chime in or you could try the mobileme forum.
    Message was edited by: V.K.

  • Using TimeMachine with one Mac and two HDD

    Hi
    I was wondering if the following can be done with out loosing data and with out confusing TimeMachine:
    Using one mac and with time machine going back and forth between 2 external HDD ?
    in order to have 2 TimeMachine HDD (one at home and one on the move)
    Did one of you did try this ?
    If yes is it working fine ?
    Thanks for sharing your feed back
    Regards

    Hi, and welcome to the forums.
    Yes, that works fine.
    The first backup to each drive will, of course, be a full one.
    Thereafter, each backup will be an "incremental" one, of all the changes that have been made to your system since the last backup +*to that drive.+*
    Of course, if you create a file at home, run a backup, then change the file and run another backup, your "home" backup will have both versions of that file. If you then do a backup to the other drive, it will only have the new version.
    The more changes you make between drive swaps, the longer the first backup after the swap will be, since there are more changes to "catch up" with. In some cases, the volume of changes may cause Time Machine to do a "deep traversal," with a longer than usual "Calculating Changes" phase, to figure out what's changed and needs to be backed up.

  • How to set up VLANs for Cisco SG500 - 28 switch

    Hi,
    First of all, this is my first post in here, I hope someone can help me, and please be patient since I am very little experienced.
    OK, so let me explain you the scenarion that I am facing and hopefully someone will be able to help me.
    We have a Cisco SG500 - 28 port gigabit switch in our workplace.
    Our goal, is to create 3 VLANs and seperate the networks between different departements.
    VLAN1 (which is the default VLAN in the switch) - will be used for IT department and the management.
    VLAN100 - will be used for business .
    VLAN200 - will be used for guests who need to connect to the internet through WiFi.
    I have created VLAN100 and VLAN200, and VLAN1 is there by default.
    I want to use port 13 for VLAN200 and to connect the Wifi access-point there.
    The uplink is in port 25.
    I would be glad if you could explain me the stuff first in a abstract more general level, and then we can look at the specific scenario that we have.
    The Cisco SG500 - 28 gets internet from a Sophos UTM 9 router.
    I will need to take care of inter-VLAN routing as well, and subnet, and DHCP
    Thanks in advance,
    Kindest regards,
    D

    Hello Desmond,
    You have two different options:
    Option 1:
    Configure Sg500 switch as a Layer 2 switch and let the Sophos firewall do all the Layer 3 routing along with internet access. If you choose this option, then, you need to configure your uplink port as a trunk port and allow all 3 vlans to pass through. Also, you need to make sure that the Sophos device supports VLANs and trunking (or at least sub interfaces and create sub interfaces for each vlan). Also, all LAN devices will have the respective sub-interface/VLAN interface IP on the Sophos as their default gateway.
    Option 2:
    Configure SG500 switch as a Layer 3 device and configure intervlan routing to manage internal network traffic locally and send just the internet traffic to Sophos device.
    You need to create Layer 3 interfaces for VLAN1, VLAN100, and VLAN200 on SG500 and then make those Layer 3 interfaces default gateway for respective VLAN.
    You can configure the uplink port as an access port in one of the VLANs.
    Make sure that the Sophos device has an IP on the same subnet as the VLAN you chose for the uplink port.
    You also need to enter static routes on the Sophos device for the remaining two subnets on the SG500 (next hop address pointing to the IP address of the VLAN that the uplink port belongs to).
    Also, on the SG500, you need to configure a default route, next hop address pointing to the Sophos interface IP address.
    Hope this helps.
    Nagaraja

  • How to share one laptop with two iPad for iTunes acc

    One laptop with two iTunes acc...

    It's possible. You just have to be very diligent about signing out of one account to use the other.

  • Port forwarding on a bt 2 hub for my i phone with plex

    Hi all i am trying to set up port forwarding for my i phone 4 with plex , how do i go about it ? step by step would be great ! cheers

    Not sure what you're asking for... or why. Port forwarding is used for systems on your network that act as hosts or servers, so they can be contacted from the outside world through your NAT router.
    As for setting up port forwarding, you will either need to reserve a DHCP address for your phone on your router, assuming it's acting as a DHCP server and has that capability, or set up a static address for your network on your phone, then set up port forwarding on your router to forward the correct ports to that address.
    All of this is way beyond the scope of this forum with the exception of how to set the static address on the phone.

  • I just switched computers from one mac to another.  How do I keep from importing all of my music library to the new mac?

    I just switched to a MacBook from a different mac and I am trying to be careful of what I am importing (my old mac has all of my music and movies, etc).  I don't want to clutter this new mac with duplicate songs etc. but I have a fairly extensive music library that is on my old mac that I would like to partially import.  Is this a possibility?  I currently use iMatch and the cloud as well.  

    [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks#w_how-do-i-import-export-or-back-up-bookmarks This article] should help you out.
    Let me know :)

  • Switching Leopard from one mac to another

    I am currently running a PowerMac G5 with Leopard installed and a MacBook with Tiger. Due to our IT department cracking down, I will have to put my G5 into storage for a few months.
    I was wondering If it was legal to remove leopard from the G5 (and reinstall the original Tiger) and install the Leopard on the Macbook.
    I was waiting for Snow Leopard to come out before upgrading the Macbook, now I would wait to upgrade the G5 at the end of the year.
    Any opinions or free legal advise??
    Thanks in advance.

    I was wondering If it was legal to remove leopard from the G5 (and reinstall the original Tiger) and install the Leopard on the Macbook.
    Yes. Assuming it's a retail copy of Leopard that allows for use on one computer at a time, your plan is legal.
    Edit: I type too slow. Kappy beat me to it.

  • One .mac and two Gmails = mess (10.5)

    I had my Tiger mail set up with a .mac IMAP account and two Gmail POP accounts. After upgrading (archive & install) it all seemed OK but I couldn't delete anything from either Gmail account; I'd get an error saying it couldn't be moved to mailbox whatever. OK, I thought I'd switch those Gmail accounts to IMAP too. One of them works OK, but on the other I cannot authenticate (yes yes I checked all the names and passwords), so I had to change it back to POP because I kinda need it, and POP credentials work despite being identical (and yeah I enabled IMAP on both accounts).
    Not real thrilled with the new Mail.app so far...

    If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account.  Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On.  If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group.  Then turn iCloud syncing for Contacts to on on all your devices.  To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view.  When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
    If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud.  If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
    The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account.  This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones.  And by using contact groups you can filter your view to just your own contacts.

  • How do I use icloud with one mac and two iphones

    I have just got an iPhone 5.
    My wife and I share a macbook pro
    My wife has an iphone 4s and uses iCloud to sync photos etc.
    I want to use iCloud too, so.....how do we use iCloud so:
    - when we each take photos on our phones they sync to our mac
    - our contacts sync (can we set preferences on our individual phones so we only get the contacts we want on our iPhones from a shared address book on the mac)
    - we have individual calendars
    Any advice much appreciated.
    Thank you.

    If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account.  Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On.  If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group.  Then turn iCloud syncing for Contacts to on on all your devices.  To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view.  When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
    If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud.  If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
    The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account.  This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones.  And by using contact groups you can filter your view to just your own contacts.

  • Can you share one Aperture Library on one Mac across two users?

    I have Aperture 2 on my Mac. My girlfriend has her own login. I would like to be able to access my Aperture Library from my girlfriends login.
    Is this possible? How do you do it?
    Cheers

    Ops! Not so fast. I would like if I can edit my previous post but I can not. So, please read below since unfortunately this is not as simple as I thought it is last night...
    I tested that last night using and manipulating the existing "test" projects and "test" masters and versions.
    Today I tried with the new aperture library in a shared folder in users folder. Did not work.
    Then I tried the library I used last night at the top directory level. It still worked. And, then, I tried to make new "test" projects and new "test" versions and the problems started.
    I tested this with the library on external disk again and it worked without problems.
    Here are the observations:
    1. With the aperture library in one of the users folder if one user opens the file, do some changes and closes the application, second user can not even open the application. Aperture will report the permissions error. Updating the permissions would cure the problem.
    2. When the aperture library is outside of the one of the users folder and proper permissions are given, both users can open and close application without problems. Existing items with proper permissions established can be manipulated and second user can still open them and work on them without problems. That is what I established last night. Making new projects and new versions, though, would lead to trouble. Updating the permissions may or may not help. I still do not understand what is happening.
    3. With the aperture library on external disk everything works without problems. Existing items are keeping there permissions. New projects and versions have "flexible" permissions. Current user is assigned full access. So, files created by user 1 will have the read and write permissions for that user for that session. Once application is closed and opened by user 2 permissions are changed giving user 2 full access to the new files and user 1 name does not appear in the panel. Repeating the same thing with user 2 creating the files and reopening on user 1 side would have same result.

  • One Mac Mini-Two Logins-One iTunes Account?

    My Kids have a mini. They each have their own logins. Is it possible to have both logins access the same iTunes account? today if one logs out while their iPod is in it will erase the ipod and synch it with the second login. I also find myself buying two of each songs for them. Any ideas?
    Thank you!

    Try the instructions in this article.
    (22027)

  • One .mac account two iphones multiple email address through .mac....help

    HI.
    I have the .mac account in my name. I added a second email address for my fiancee. have used the .mac address for me for years and recently got an iphone which the address works fine on. My fiancee just got an iphone and want to use the email address I set up for her on our imac (I sync my phone with my powerbook). However I can't get her iphone through the .mac account set up using her address. Any ideas?

    You don't need to purchase a Family Pack for this.
    .Mac members can purchase up to 10 additional email-only accounts for US$10.00 each, per year. (Email-only accounts include 512 MB of storage, which can't be increased.)
    If you use an alias, all messages received by your finance will be delivered to the Inbox mailbox for your account. You can't create an alias as a separate email account - it uses the user name and password for your primary account.
    If you purchase an email only account for your finance, it will be a separate email account - kept separate from your email account.

  • One Mac g5 Two Hard Drives + Two Libraries.

    I have 2 hard drives with music on both. Id like to pull from both hard drives using only 1 iTunes Library on 1 Hard Drive with out transferring all music to 1 HD. Help?

    Open the Advanced section of the iTunes preferences, turn off the option to automatically copy music to the iTunes folder, and then drag one or both of the folders into the open iTunes window.
    (35532)

Maybe you are looking for