HP 5200 show me 4606 error.

Hello Folks.
I have a HP laserJet 5200 and it working on my network, When I send print to it show me "error 4606, Turn off and Turn on". I upgraded Firmware and Reset factory too but problem not Solved. How can I solve it?
How about Printer Longevity ? I mean is that how much print with a 5200 Laserjet and it can work for me without any error?
Thank you.

I believe that indicates a problem with the power. If you have the power coming through a surge supressor, try plugging it directly into a wall power outlet. It is possible the power adapter is failing or the connection is weak.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

Code 5200 shows up on my pixmamx320. What is it and how can I fix it.

Code 5200 shows up on my pixmamx320. What is it and how can I fix it?

Hello pep303.
To try and resolve this issue, please unplug the power from the unit for about 25-30 minutes. Once this time frame has passed, plug the unit in directly to a wall outlet to see if the printer will power on.
If the error still remains, please contact a technical support representative at 1-800-652-2666 between the hours of 10 a.m. and 10 p.m., EST, Monday - Friday for additional assistance with this error.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Whenever I try to open Microsoft Word it doesn't open and shows me an error report!

Whenever I try to open Microsoft Word it doesn't open and shows me an error report! I don't know what to do! Help!!!!
This is the extra info that comes along with the error report:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-08-30 16:41:14 -0400
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.1.0.110310
Crashed Module Name: MBURibbon
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x000072f0
Blame Module Name: MBURibbon
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x000072f0
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
What should I do??????

It might be a good idea to also ask here:
Office for Mac forums

The 'Apps' tab in my Creative Cloud Desktop app shows a Download Error

I have tried uninstalling, downloading, and reinstalling Creative Cloud Desktop and continue to get the Download Error prompt. It either shows the Download Error prompt or it continues to just think and think and think. All the other tabs work normally. I've also signed out and signed in of my CC account multiple times . . . with the same outcome.
All of this started after I had updated all the available updates . . . I was also looking to install Lightroom CC.

You may try providing full permissions to Adobe folders under ~/library/Application Support and /library/Application Support.
Then launch Creative Cloud app and try loading Apps list
Still same ?
Try below steps :
1)
Launch Activity Monitor and "Force Quit" all the process related to Adobe like Creative Cloud, CoreSync, AAMupdater, AAMupdater notifier, Adobe Crash demon from Activity monitor.
2)
Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
3)
Trash Adobe Creative Cloud from Applications well.
4)
1) Right click on Finder icon and select "Go-ToFolder " option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and trash folders named AAMUpdater and OOBE.
5)
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.
/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.
6)
Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/…
7)
Click on the below link and download and install Creative Cloud desktop app.
https://creative.adobe.com/products/creative-cloud

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

My Adobe Muse website wont publish, it's running slow and showing a server error

I've had a website in adobe muse that I've published many times before with no errors. After publishing, It tries to upload the site and loads it very slow and stops at about 69% and says the server is not connected, even though I have internet, checked the firewall and updated the cache in explorer. I was able to upload another website that I have on Muse, it loaded slowly also, stopped at 97%, I resumed it and it loaded. What to do next?

The site is hosted through business catalyst: northstarconservancy.org. I've had no issues with this website in three years and have been able to edit and publish with no problems. It shows a server error and says to check my network connection. I noticed that adobe was working on their server the night before I had this issue, so I will probably have to call the tech support and see whats up with it, since it seems related. Thanks, Amanda

While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Satellite L505-13W shows Blue screen error

My laptop SATELLITE L505-13W Shows blue screen error.
The os gets booted up and after some time it shows a blue screen error and restarts.
On restart it asks for repair, even after succesfull repair it showed the same error.
So i tried to recover using the recovery cd but it proved to be a tragedy.
It eraced my full HDD to stone age and smiled at me saying recovery is not possible.
please help me.......

Hi
If the notebook cannot be recovered using the recovery disk, then all this smells like hardware problem.
Are you sure that your recovery disk is OK?
Did you try to install the OS using other installation disk?
Maybe this would be useful to check if the issue might be related to the faulty recovery disk but if the BSOD (blue screen of death) appeared before the OS installation, then I would say the issue might be caused by internal hardware malfunction
It would be necessary to check the RAM modules and the HDD.
HDD can be checked using the HDD diagnostic software like Drive Fitness Test (freeware)
RAM could be checked using a tools like memtest but you need a running systemso in this case you cannot check the RAM using a software I recommend removing one module and testing the notebook using one module in each slot

What do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G.

TS3297 every time I try to download iTunes in my new computer it shows me an error message

Every time I try to download iTunes in my new computer it shows me an error message that says The installer has insuffucuent privileges to acces this directory C:/program files (x86)/iTunes. The installation cannot continue. log on as administrator or contact your system administrator.. retry or cancel and it doesn't le me go forward than this I have already contact HP and we fixed it I mean we installed iTunes 64 bit, but the minute I put my iPhone to sink it it says that I dont have the new version of iTunes whici I've just already installed..this problem has been like this for more that 3 months I need an assitance because my phone really needs to be sink because it is acting weard and slow... Other than that my husband and I are thinking seriously change our iPHONE 4S for samsung phones with less probles instead of buying the new iPhone 5 because of this dull reason...Thank you for your help!

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Creative cloud desktop app show APPD download error

Creative Cloud desktop app show APPS 'download error' - gives the option to reload applications or contact customer service
Reload doesn't work
I tried uninstalling and reinstalling the app - same error
Trouble began after I attempted to download a Bridge update which wouldn't complete

Spent 2.5 hours on support chat and screen sharing with adobe support today, and after many uninstalls, CC clean ups etc, they could not get it working.
Like you, it has always worked until today.
The only thing we could get to work was to login to os x as root user and run Creative cloud from there.
It's a PITA, but I am used to it because my desktop CC installer has been broken since last year, so I now have two computers with broken CC installers.
OS X Mavericks: Enable and disable the root user
good luck

Dreamweaver CS4 keeps showing a licensing error 150:30. Any ideas?

I am running Dreamweaver CS4 on a MacBook Pro. After a Mac OSX update earlier today Dreamweaver keeps showing a licensing error 150:30 and the only solution on line is not suitable for OS 10.9.5. Any ideas?

The terminal app option worked but after a restart I got the error message again. It worked a second time but then another restart brought me back to the beginnin. Have repaired permissions and tried the other potential solutions. I only use DW CS4 once in a while but I'd love a permanent solution.

Plugin not working with firefox 4.0.1 showing an compatibilty error however it is getting installed in Firefox 3.6 successfully. Dont know what is going wrong please help on urgent basis

Hi,
Plugin can be loaded from the link below. This is getting installed on the firefox 3 version but each time I install it on Firefox 4 version it shows the compatibilty error. I have disabled the compatibilty check for firefox in default:config setting but still getting the same error. Please resolve asap.
Thanks in advance

That extension has a maxVersion of 3.*.* (3.0.* in update.rdf) and can't be installed in Firefox 4.
<pre><nowiki><em:minVersion>1.5</em:minVersion>
<em:maxVersion>3.*.*</em:maxVersion></nowiki></pre>

Report suddenly showing ORA-20001: Error fetching column value: ORA-06502:

Hi,
Some reports in my applications are suddenly showing:
ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
instead iof the data they used to show.
In my development system I can fix this by:
1. changing the column alias in my sql
select 'a' alias1 from dual becomes
select 'a' alias2 from dual
2. SAVE CHANGES
3. change column alias back to original
select 'a' alias2 from dual becomes
select 'a' alias1 from dual
4. reorder columns back to original in the 'report attributes' tab
alias1 is now at the bottom of my colum list - i just bounce it up to column 4 using the up arrows
5. SAVE CHANGES
then everything starts working OK again.
There seems to be nothing wrong with my sql as I can make it works on a new page or after I run the above steps, so I guess something is breaking somewhere but I cannot work out what.
Has anyone else seen this? Does anyone know the cause? Does anyone have a fix for this that does not involve the above steps (plus redeployment to prodcution and all the work that involves)?
I am seeing this on version 2.3 and 3.0.
Thanks,
Martin

Hi Scott,
I think this is want you want (sorry it's not easy to read):
wp.suite_id - Database Column NUMBER - Report Column Based on LOV
wp.project_id - Database Column NUMBER - Report Column Based on LOV
wp.application_order wp_order - Database Column NUMBER - Report Column Standard
lpad(wp.work_package_id,5,'0')||' - '||wp.name wp_name - Database Column NUMBER/VARCHAR2 - Report Column Standard
pt.application_order pt_order - Database Column NUMBER - Report Column Standard
pt.name pt_name - Database Column VARCHAR2 - Report Column Standard
substr(pt.description,1,30) description - Database Column VARCHAR2 - Report Column Standard
pt.application_tier - Database Column VARCHAR2 - Report Column Based on LOV
pt.application_method - Database Column VARCHAR2 - Report Column Based on LOV
pt.TECH_LEAD_ID - Database Column NUMBER - Report Column Based on LOV
This report has no link columns and no derived columns.
Regards,
Martin

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

HP 5200 show me 4606 error.

Similar Messages

Maybe you are looking for