HP 6520 won't scan with wireless connection and new router

My printer scanned fine before. Got a new internet provider=new router and now I can't scan scan anymore. The computer is connected wirelessly. The computer says it cannot communicate with the scanner. Same if I try from the printer front panel, it says it can't communicate with the computer.
The router seems like the obvious cuprit, but nothing in the router settings or manual suggest anything that could be blocking the scanner communications. The router firewall is turned-off.
Printing works fine, and I can connect to the printer through its IP address. The user interface can see the printer status, check ink levels, everything. Everything works but scanning. I've re-installed software multiple times, tried turning off firewalls and tried HP Scan and Print doctor. It's not much help.
I'm at wits end.
-ETC

Hello @etcottle , and welcome to the HP Forums!
I see you are experiencing scan connectivity issues. I would like to help!
I would recommend powering down your computer, disconnect the power cord from the printer and the power outlet, and remove the power from your router for 60 seconds.
After 60 seconds, plug the router back in. Once the router has begun broadcasting, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
After the printer is on, re-run the wireless setup.
I'd also suggest this document:
Wireless printing center Troubleshooting Issues
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Problems with wireless connection between new macbook and older imac

I have just bought a 2.0 ghz macbook core2duo and am unable to connect to my wireless internet network at home. My wireless connection is set up through the airport card in my 17" flat panel imac (i.e. I am using the imac as the internet base station). I had an old clam shell macbook (which just died hence the new macbook) and still have a 400 mhz graphite SE iMac which both connec(ed) to the network perfectly for years. But the new macbook will not connect. It will connect when connected via ethernet. The imac uses Tiger.
I have tried resetting the name of the network, using encryption and not using encryption, but nothing helps. The macbook appears to see the network (although no bars register in the airport connection icon) but I always get an error message when trying to connect.
Does anyone have any ideas?
Thanks

I am not actually using a router as I am using the airport card (non express i believe) in my iMac to send the wireless signal. My modem is Motorola but not sure which model. I have Comcast cable internet service
Nick

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Photosmart d110 won't scan with Mac OS X 10.9

"HP Scan" utility used to work correctly with my iMac and hp Photosmart d110 printer/scanner. Since updating to Mac OS X 10.9.5, the scanning no longer works. I've downloaded most recent scanner drivers, and installed multiple times. Connection is hardwired USB.
Multiple symptoms: "can't connect" errors, or scans very slowly and generates a black blank page. Printing works fine.
(Windows laptop scans correctly, with wireless connection to the d110.)

Hi,
The HP scan app is no longer available for Mavericks, scannign can be done from Image Capture or Preview:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
If that fails as well, try updating the software by following these steps:
Click the Apple icon, then select Software Update.
Click the top Store menu and click on Reload Page.
Be sure to install any HP or Apple update, then try scannig again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

New problem with wireless connection since 27th No...

Main desktop computer (windows xp) is connected directly to the internet via ethernet cable to BTHub3. No problem exists with this connection.
We have previously had no problem connecting Tablet, laptop, and internet radio via wireless connection to our Hub. Problems now exist with wireless connection to all of these devices:-
- When attempting to use any of the devices wirelessly, we are unable to obtain a connection to our Network (shown on the list of those available) - indicates - "out of range" or "obtaining IP address" or "authenticating" or "network disabled - poor connection"
- On occasions, the devices DO show that they are connected wirelessly but are unable to access the internet or use any programmes requiring an internet connection. Messages indicate - "no internet connection" or "connection timed out - retry" or "cannot access this webpage", even when we are in the same room as, and only a few feet away from the Hub.
- One anomaly has occurred in that the internet radio did connect and function normally on 2 occasions recently , for a duration of a couple of hours, before loosing the connection. However, during this time, the other devices still refused to connect.
Measures we have undertaken to try to resolve the problem are :-
- We have visited the "Wireless troubleshooting" part of the BT Helpdesk on several occasions, but had already tried the measures suggested here, including changing channels and hub reset.
- We have spoken at length to the BT tech. helpline who have been unable to resolve the problem.
- We have emailed BT Help and received a reply from India suggesting all the things that we have already tried (ie. a "stock answer").
- We are not confident enough to access the Hub Manager as we feel feel this is beyond our capability.
We would be most grateful if someone could help us.
Solved!
Go to Solution.

Wingman2, the first thing I would do is uninstall BTDesktop Help if you have it installed. It can cause more problems than it solves.
I would also suggest that the first thing to try is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds.
After you have done a reset if you still have problems, download, install and run inSSider. It will show you the wireless channels and which one your Homehub is on. You want to find the channel with the least congestion, ie. least number of users. Once you have that you need to change your homehub onto that channel.
See link for insider. Use the free version.
http://www.metageek.net/products/inssider/
See link how to change channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/14094
After that if you are still having problems you could try setting the home hub to b/g only instead of b/g/n. If one of your devices is not "n" capable it could help.
http://bt.custhelp.com/app/answers/detail/a_id/13768/session/L2F2LzEvdGltZS8xMzg4NzgxNjIyL3NpZC9Vd3p...

WRT54GL - just today it won't keep wired/wireless connections HELP Please

This router is less that a year old and just today it won't keep wired/wireless connections unless I reset the router and sometimes within 5 mins of a reset, it's out again. I can go into the Admin/Status page of the router and DCHP release/renew the IP from Cox and that works the same as a reset of the modem.
Can anyone give me an idea what this could be? Cox looked at the Motorola modem and saw that it was connected for 3 hrs (3 hrs prior I rebooted the modem thinking that was my issue) and they didn't see anything out of the ordinary.
I have the latest firmware installed.
Message Edited by u43a on 05-25-200704:38 PM

Are you using any peer-to-peer (P2P) software? If so, this is a known cause for router slow downs and disconnections. Go into the P2P software, and reduce the number of connections that the software can make.

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Mac mini setup with wireless mouse and keyboard

Bought a new mini with wireless keyboard and mouse. Turns on, picks up the mouse and as soon as the registration setup window starts the connection is lost. It never picked up the keyboard. Apple support said it is not possible to set up a new mini with the wireless accessories so go buy wired ones. Is this really true? Is there a way to skip the registration window, install the wireless keyboard and mouse? Has anyone else had this problem?
If what the phone support guy said is true then I am a very unhappy new Mac purchaser. Nowhere on the Mac mini site or even in the instruction booklet does it say that you have to have the wired accessories and now apparently I'll have to buy two of everything. Total garbage.

Can you beg/borrow or steal any ("Windows") USB keyboard and mouse? They should get you going. You'll only need them for a few minutes when starting up, once.
"Garbage" doesn't endear yourself when asking for help on an Apple board though!

I use Time Capsule and Airport for my wireless connection and my speeds stink!

I am getting horrible speeds (250K downloads) any suggestions. I have the time capsule and the Airport for my wireless connection and I have a new MacBook Pro. My download speeds are about 250K. I have turned off my wireless and plugged into my network with a physical connection and I get great speeds so something is wrong wiht my wireless connection /setup......any suggestions?

Yep much better.
I recommend the following ..
Set wireless and TC names to SMB standard.. short, no spaces.. pure alphanumeric.
Lock the wireless channels and set a different name for 5ghz and also lock its channel.
Use only WPA2 Personal security with a decent passkey.. generally 8-12 characters is plenty. Still follow the rules.. pure alphanumeric mix of upper lower case and numerals..
If that does not improve things.. how old is the TC.. the wireless output does seem to slide as they age.
A simple WAP connected to the TC can provide far superior wireless for very little money.

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I have just downloaded ML. I can get my email via iCloud, but I can't get it on MAIL 6.0. I have done the JAVA thing--seems to be OK. MAIL 6.0 on my desktop won't sync with Mobile Me and won't download emails. Any suggestions?

I have just downloaded ML. I can get my email via iCloud, but I can't get it on MAIL 6.0. I have done the JAVA thing--seems to be OK. MAIL 6.0 on my desktop won't sync with Mobile Me and won't download emails. Any suggestions?

Just did something--am not sure what, probably in the "iCloud"--but seems to be working at last!

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Mail returns to 'main menu'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. HELP!

Mail returns to 'main menu/desktop'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. PLEASE HELP!

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Can you access the mail account(s) on another device and look for a problem email that may be causing the problem
- You could try deleting account(s) and recreating them

HP 6520 won't scan with wireless connection and new router

Similar Messages

Maybe you are looking for