HP Laserjet windows 2008 R2 competability
Pls conformed for HP Laserjet all in one is compatable with windows 2008 server R2
Hi @RajeshChaudhary,
I understand that you would like to know if Laserjets are compatible with Windows 2008 R2. I can help you.
Some models are compatible.
The easiest way to find out, is to go to the HP.com site and check the drivers for that specific printer.
HP LaserJet Pro 200 color MFP M276nw Drivers.
Here is a example of one of the models that support Windows 2008 R2.
Hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer
I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server. I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers. Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer. I have even tried the generic 32 bit PS and it says the same thing. Any ideas on what I am doing incorrectly or where to get the drivers that I need?
Thanks,
GaryHello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.
-
Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn
Hello,
I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine.
The printer is connected to the corporate network and I am able to do ping from my desktop to the printer.
Then I follow this steps.
1.- Install the driver application for W2008 Server.
2.- Add printer in W2008 Printer Server.
3.-Select "add a local or network printer" as an administrator.
4.- Choose network printer
5.-Create a new port --> Standard TCP/IP Port
6.- Fill the host name ---> ("printer1") or IP address --> (XX.XXX.XX.13) I have tried the both options separately but with no result. And fill the port name
7.-At this stage . W2008 Server tells me that " the device is not found on the network" . Be sure that: .....
So, in select device type, I select "Standard" and "Generic Network Card" and click on Next
8.- Install printer driver -> I select the proper driver HP LaserJet 1606dn
9.- Install the printer driver ---> use the driver that is currently installed (recommend)
10.- Type printer name --> "printer1"
11.-Share printer name ---> "printer1"
Here, begins the problem. Trying to print a test page, It says me that "A test page has been sent to your printer", I can see the document in the queue, but the printer page it isn`t thrown away outside.
I dont explain myself why, I have done several trials, and I dont know what happens
I would be very grateful if somebody could help me to solve this issue
Many Thanks
RobertHi lespaul80,
1st- check if you can connect to your printer on web interface(in IE: \\printer ip address
and check under network setup if subnet mask and def. gateway setup
also if you have DNS setup check it too
check if you have SNMP options - desable it
on server try ad printer by direct IP and try use upd drive(PCL6 or PS)
Hope it help you
Regards,
I am an HP employee.
*Say thanks by clicking the "Kudos! Star" which is on the left*
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.* -
How to install HP laserjet 1536DNF scaner in windows 2008 r2
I have Hp Laserjet 1536dnf all in one printer installed in network.Printing is ok, not able to installed scaner on windows 2008 R2. Same natwork client system having windows 7 or 8 can install and print very well.Any idea to install scaner on windows 2008 R2 server?
Hi,
We only have UPD driver for this printer on Win Server 2008R2. YOu can check the driver page; Server 2008R2. but we do have full software solution and Basic print/scan driver for server 2008 32/64 bit. Server 2008 32/64bit
It may work with server 2008 driver but support would be limited. You can also try uninstall/reinstall from CD.
Thanks,
ExpertOne
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue -
Windows 2008 R2 Driver for HP Laserjet 8150 - Network Connect Fails With 0x000004005 Error
Dear All,
I'm trying to connect to a network laserjet 8150 with Windows 2008 R2. The server keeps complaining that it can't access a suitable driver - even if I point it specifically to the universal printer drivers available on the HP web pages.
Connecting to the printer manually with a new TCP/IP port seems to work but I need to be able to use the 'right-click, connect' option as the printer is not using a standard port for normal use.
Any ideas anyone?
Many thanks.
Chris@Paul-I
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
Laserjet m1217 will not print through easyprint on windows 2008 server 64Bit
We have a client that has the LaserJet M1217 that is connecting to our Window 2008 Server SP2 64Bit via Remote Desktop. Easyprint recognizes the printer, but will not even print a test page. We get a FAIL message. We either need to know how to print through easyprint, or if there is a driver that can be installed remotely.
This question was solved.
View Solution.I would contact Microsoft about this. Since Easy Print is one of their features, they should know what is causing the error in the first place. Let me know what they say.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Slow network printing on Windows 2008 Server
Hi,
We are just testing/configuring a Windows 2008 (x64) server to replace an aging Windows 2000 file & print server.
I have added the print services role and added a network TCP/IP printer (a HP Laserjet 2200).
When I print to this printer from either the server (via print test page) or from a client, it takes around 30 seconds before the print will start to print. On our Windows 2000 server, this would print immediately.
I have insalled the HP 2200 driver that came with Windows 2008.
Anyone any ideas where to find the problem causing the delay?
Thanks,
KennyHello,
I have done some research and I find firewall component of the antivirus software such as Mcafee might cause similar network delay issues.
If you have installed AV softwares on Windows Server 2008, please try uninstalling it temperately and test whether this will make any difference.
Moreover, You could also try disabling TCP Chimney Offload, RSS, Receive Window Auto-Tuning Level on Windows Server 2008 one by one to see whether it makes any difference.
To disable TCP Chimney Offload, follow these steps:
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh int tcp set global chimney=disabled
To disable RSS, follow these steps:
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh int tcp set global RSS=disabled
To disable 'Receive Window Auto-Tuning Level', follow these steps: :
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh interface tcp set global autotuninglevel=disabled
I hope this helps. Thanks.
Regards,
Neo Zhu -
SAP Backup Service SAP 8.8 and Windows 2008 R2 64 Bit
Dear All ( Mr Gordon)
I am facing problem with the Backup Service on windows 2008 R2 64 Bit.
1)The Service starts - There is no Issue
2)THere is no Backup - Even though i schedule it perform the backup
3)EvenLog has a lot of messages - Messages says some Dll are Missing or Corrupt.
COmpletely Uninstalled the Server Tools and Reinstalled back ,still there is error.
PLease help !
Best Regards
DayalDear Dayal,
Thank you for your trust on me. To be honest, I never use SAP Backup Service. This is because: SQL Server provides its own Backup Service. No other vendor can compete with its build in function.
Thanks,
Gordon -
I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.
I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.
Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Windows 2008 Server and Windows 8 clients
Hey Guys,
I have had this problem for sometime now and really need a solution. I have Windows 2008 Enterprise Server running about 200+ terminal services clients. All Windows XP clients are fine, Windows 7 clients have issues when they get an updated version of
remote desktop client(to solve the issue we simply rollback the update), Windows 8 clients cannot connect and use out remote app. The issue stems from the newer version of remote desktop client (on windows 7 and embedded in windows 8) cannot connect to our
terminal server and generates an error and immediately disconnects. The error says "
Your computer can't connect to the remote computer because an error occurred on the remote computer that you want
to connect to
So my questions are, how can i update my Windows 2008 Terminal server version to support these clients, or do u have migrate to Windows 2012? Or is there a solution to my current problem which will allow my client to connect and use the remoteapps?Hi,
Thank you for posting in Windows Server Forum.
Please follow the below steps and verify result.
LAN manager authentication level settings (Local security policy->Local Policies->Security Options->Network Security: LAN Manager Authentication level).
Try to change it to "Send NTLMv2 response only"
Snap:
If still face the issue please install this Hotfix.
RDS client computer cannot connect to the RDS server by using a remote desktop connection in Windows
http://support.microsoft.com/kb/2752618/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Bit Locker on windows 2008 R2 Virtual machine
Hello there !
We have a a number of Windows 2008 R2 machines and we wish to provide an encryption mechanism for each Virtual machine.
It's a VMware environment and all the VM files go into NFS drives.
Do you think , Bitlocker will help ?
Is Bitlocker supported on Virtual machines ?
In my opinion , Bitlocker is to safeguard against any "physical" threat to a machine.
But I wanted a second opinion here.
Please help me.VMs don't have a Trusted Platform Module (TPM) available to store the Full Volume Encryption Key (FVEK) used for BitLocker, but you can still use Hyper-V by storing the necessary information on a floppy drive. Use the command line:
cscript c:\Windows\System32\manage-bde.wsf -on C: -rp -sk A:
BitLocker is now enabled within the VM.
VMs don't have a Trusted Platform Module (TPM) available to store the Full Volume Encryption Key (FVEK) used for BitLocker, but you can still use Hyper-V by storing the necessary information on a floppy drive. Use the command line:
cscript c:\Windows\System32\manage-bde.wsf -on C: -rp -sk A:
BitLocker is now enabled within the VM.
Hyper-V Security How to: Use BitLocker to Protect Your VMs
http://blogs.technet.com/b/tonyso/archive/2008/07/01/hyper-v-security-how-to-use-bitlocker-to-protect-your-vms.aspx
for VMeare VMs you have to check with VMware and these links may help you
How to Encrypt VMware VM running Windows 2008 R2 with Microsoft Bitlocker
http://www.christowles.com/2010/10/how-to-encrypt-vmware-vm-running.html
http://www.networknet.nl/apps/wp/archives/395
Mohamed Fawzi | http://fawzi.wordpress.com -
How to install a plugin on 64 bits windows 2008 server?
From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
How to install Cisco Work 3.2 on Windows 2008 Server Standard R2
Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
FaridHi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet -
Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6
I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup DriverHi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios
Maybe you are looking for
-
Can not save JDBC lookup in mapping (PI 7.1 SP07)
Hi All, When I try to save my JDBC lookup, I get error while executing save - 'Binding rec0 is not found in the brick. Check update method' I made Re-initialization in Java Web Start Administration, but problem did not resolve. Regards, Andrey.
-
Regarding display of Account Number in Report Writer Report
Hi All, I am working on Report Writer Report. It is related to Dipslay of Account Numbers with their corresponding description. My Issue is On the output screen I am able to see only the Description of Account Numbers. But I need to <b>Display the Ac
-
How to transport SPROXY's on SR3 , SP14
Dear All, I developed the ABAP server proxyu2019s in SR2 , SP12 version and QA environment we were installed SR3 , SP14 version. And in SR3 version SPROXY transaction code pointing to SE80 T.code , as of this blog I came to know that ABAP proxies has
-
Is Apple fixed layout epub supporting two languages in one ebook
Hi Everyone, Is apple fixed layout epub supporting two languages in one epub file? Regards, Arun
-
App Store - your request could not be completed
Hi, I have an issue with the message in subject appearing evey time I try to browse the App Store. Any idea how to solve? Thanks, Massimiliano