HP PSC6180 leopard driver issue

I am unable to select anything from the lower half of the print driver window options, that is from "Paper Type/Quality" through "Print Driver Information". The choices are there, but when they are selected the drop down menu returns to say "Layout". I am working via Bonjour, and I had no problems with anything under 1.4.10 and the old driver. The printer works great printing documents on plain paper, but I can't select any other options. (for example, no more 4x6" prints, not photo quality settings on my Photosmart printer, etc.)

I was seeing exactly the same problems with the latest Leopard download from the HP website. I am using a C5180 and 10.5.1 on a MacPro.
I have now found an install method which works for me, on my MacPro and on my 24" iMac.
I downloaded both packages from the HP website, the large 204.5MB file and the tiny 160KB file (which appears to be an update that modifies the supported paper types).
From reading on various forums about this printer and Windows, it appears that the HP drivers have trouble when the printer get it's IP address dynamically, and that dynamic address changes on a subsequent powerup of the printer. It seems that the address is stored in the registry, and then the driver doesn't update it properly when the printer gets given a new one. It seems that HP haven't quite twigged to the concept of 'dynamic' when it comes to DHCP. In order to ensure that I wasn't seeing the same problem under MacOSX, I configured my router to always hand out the same IP address to the printer. You could also setup the printer to have a static IP address on it's control panel.
I then ran the 'HP Installer' from the large download, and sure enough the printer pops up in the install dialogue and is recognised by Bonjour. Select the printer, and proceed with the install.
When it comes to the part where you have to open the Print+Fax dialogue, this is where I think I went wrong previously. When you click on the plus symbol to add the printer, almost immediately the dialogue shows the printer as recognised by Bonjour. DO NOT select the Bonjour instance of the printer, but wait a few seconds (about 20, I've found) and another printer will show up. On my system, it shows as HPC6BDB9 with type of 'Network Printer (HP IP)'.
Select the 'HP IP' printer, and then proceed with the install.
Once the install finishes successfully, then install the other smaller update.
You should now have a printer with all functionality.
From examining the tcpdump output between the MacPro and the printer, it's clear that you will get limited functionality if you use the Bonjour instance. This is because the driver appears to connect using a more limited IP printing command set. This command set appears to lack some of the functions present in the HPIP protocol.
Hope this helps.
Andy.
Message was edited by: Andrew Fox

Similar Messages

Incredibly slow MacBook, Internal Hard Drive issues...

Good morning everybody! I'm apologize if this post is extremely wordy...
I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
_Brief history:_
Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
_Now for the kicker..._
My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
Conclusion:
I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
Thank you all for your time!
:D

Unable to launch several applications in Snow Leopard/ iDVD issues

I upgraded to Snow Leopard 4 days ago and am having trouble launching several applications. The list includes:
-CuteFTP for Mac
-Adobe CS3: illustrator, flash, InDesign
-Cisco VPN client
I've tried selecting the "use rosetta to open" option in "get info" on the affected applications with no luck.
Additionally, while burning a DVD I was unable to switch applications when iDVD was multiplexing and writing (~ 30 minutes total.) After the disk was done, the Finder toolbar was gone, and I couldn't re-launch Finder. I had to do a hard restart.
Did I miss something during installation? This ranks with the original OSX (10.0) transition in terms of disruption.
Any advice would be greatly appreciated.
Thanks,
Eddie

CuteFTP hasn't had an update since June 2008. CyberDuck is free and there is a new 64 bit version in beta here: http://www.versiontracker.com/dyn/moreinfo/macosx/14426
Adobe said they haven't tested CS3 with SL - you can try their support forums for better info: http://forums.adobe.com/community/creativesuites/creativesuites_macintosh?view=d iscussions
Cisco VPN - There is a thread with a lot of information, and some solutions here: http://discussions.apple.com/thread.jspa?threadID=2131308&tstart=0&messageID=100 89199
I don't know about an iDVD problem like you had. I've been burning fine with Toast 10, although I do miss my contextual menu's. I have to launch the program first now instead of just right clicking on a file and choosing Burn with Toast. Apple removed almost all of the contextual menu's in favor of an improved 'Services' system that I never used in the past.
Leopard caused as many programs to quit working when Apple dropped support for OS9. There were hundreds of complaints. SL does change the basic structure to support 64bit apps, and seems to have caused minor problems with a wide range of programs, while other programs of the same type seem to work great.
The worst problems I'm seeing are related to HP Printer driver issues. Luckily I switched to Brother Printers a couple of years ago. Brother had their drivers ready months before SL's release date and they download as soon as you install the OS and run 'Software Update'.

Firewire Driver issue

Anyone using M-Audio Firewire 1814 still experiencing Driver issues with Snow Leopard and LP9? There was an update on 11/13 and 11/14 but my Firewire still isn't working. Anyone got any ideas? This is absolutely crazy that M-Audio hasn't got itself organized. Make me think twice about purchasing another one of their pieces of equipment. This is crap!!

Thanks guys for replying - I'm very grateful.
I have reset PRAM, bought a new FW cable, de-installed and reinstalled OS X and APOGEE user interface. I do not have any other FW devices unfortunately but I can try it on friends so will do that to rule out a hardware fault. The mini has only been in my possession since early jan and it was a completely clean unit - no apps or software etc.
The one suggestion I do not follow above is the Partition startup or Mavericks start up - sorry.,...what does that mean ? I do have 2 500gb drives plus 2 external HDD so storage is no problem. I will also try the SMC suggestion as I don't think I followed those steps clearly last time.
Again, thanks for your time. wish me luck - all I want to do is play and record my music !!!

Logic Board or Hard Drive Issue?

Recently my PowerBook G4 failed to boot from the internal hard drive. Gray Apple screen, spinning wheel and after a couple of minutes restart is all I get. What happened initially was the computer froze not allowing Safari to quit for restart. I had to manually shut down after all other means did not work (Force Quit, etc.). I have been able to get it to boot from an external Firewire drive running 10.4, but it will not recognize a USB drive, though the USB ports work for a printer and scanner. I was also able to get it to boot from a 10.5 Install DVD that came with my wife's MacBook. Since I bought this PowerBook used, it had no disks included, but did have 10.5 installed. The other thing is the lower RAM slot has not worked from the day I got it. When I run Disk Utility the drive checks out, though there were some Permission repairs. SMART checks verified. I seem to be able to access the internal disk when booted from the external. Reset PMU & PRAM, no difference. Should I try replacing the hard drive or do I have another issue here?

First up, PowerPC-based Macs can't boot up from a USB external drive (per se... there is a workaround and "hack"). Only Intel-based Macs can do that.
Second, since you say it works and boots up when connected to a FireWire external drive, I believe it is a hard drive issue. S.M.A.R.T. status is not ("not") always a reliable indicator from what I've heard. It may say it's verified, but really it's failing. By the same token, it may say failed, but really it's fine.
That is not always the case however. 95% of the time, S.M.A.R.T. status is highly accurate.
If you are so inclined, you can open up your PowerBook, take out the hard drive, and place a new one in there and see what happens. If it works, you're in business. And you only spent a $100 or less on a new drive (which you might end up needing anyway if your current drive is indeed broken).
(If your drive isn't broken, then you have a backup drive ).
If the new drive installed doesn't work, then it is a logic board issue or something else. But since you say it works fine and boots up from a Leopard install DVD, I think it may just be the hard drive. And a new logic board usually starts at $300 so think about that as well. (You could get a new used one for a bit more and sell that one for parts).

Hard Drive issues - Seeking Opinions

Over the past few days I have been having difficulty with my internal hard drive. It has been having problems booting up properly; oftentimes it would get stuck on the gray screen and stall there. I was able to save my files and move them to an external hard drive, and I then have tried erasing the drive (zeroing out the data once) and reinstalling OS X Tiger or Leopard but each time the installation hangs, on both possible installations. I have used Disk Utility to verify the hard drive multiple times throughout this process, and there have been no repairs needed. So I decided to install OSX Tiger on an external firewire hard drive and see if my system would work with that. And it works fine with the external hard drive. Would you think that something is wrong with my internal hard drive? As opposed to a software issue or some other internal issue?

Until I know more about the Apple disk diagnostic, I'd still say the hard drive is not ruled out. SpinRite. Burning a CD is easy, and I do know that if SpinRight says the disk is ok, then it is in fact ok. Anything less and it's still a variable in my book.
Does it freeze at the same point every time? If so, at what point in the installation?
Either way, if it installs and runs on the external, then it still sounds like a drive issue. Is your external a 2.5"? If so, swap them out and try again, just as a test.
-Travis
Message was edited by: Travis B
null

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Very slow wine game/nouveau driver issue

Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

Hard drive issues after update 10.10.3

Question also posted here:Hard Drive Issues (Both new and old)
I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
So, I decided that it was a HDD failure and bought a new one.
I bought the Seagate 1TB SSHD Hybrid - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
Any ideas on *** is going on?
Thanks in advance!
MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac and at least iOS 5 on the mobile devices.
I show those document on my Mac, iPad 4 and iPhone 4S

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Pixma ip6000d windows 7 driver issue. How do you get one?

Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.

Hello ricksterofmi,
The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update. Please connect the PIXMA iP6000D to your computer and automatically install the drivers. Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
I hope this helps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Driver issue after Downgrading to Windows 7 (Pavilion 17-f081no)

So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
My wireless card info:
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
PCI\VEN_10EC&DEV_B723&CC_028000
PCI\VEN_10EC&DEV_B723&CC_0280

Hi:
First install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
See if the generic amd graphics driver works...
http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_143747_1
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

Driver issue with Cisco HD Precision / JFV 4.4

Hi,
Just to installed Jabber for Video4.4 on my laptop ( win7 64bits)
all works fine except the video!! i use a Cisco HD precision wih Jabber, may be a driver issue, the camera is not recognized.
When i selected my integreted camera from laptop, the video is going up.
i've already the same issue with Jabber Video 4.3.
Does anyone has got the same issue? Any idea?
Thanks

Thread back from the dead...
I have this exact scenario playing out today trying to use a PrecisionHD USB camera with Windows 7. Completed the 1.5 update listed here and following the update I see the results in the picture. The LibUSB device is present, and it looks like a Tandberg HD camera is known to the system, but not accessible/usable.
Anybody have success with this issue or have any additional ideas to try?

HP PSC6180 leopard driver issue

Similar Messages

Maybe you are looking for