HT1145 I have an older plug in version of Airport Express and am trying to connect it to my wifi network to boost coverage but it is not connecting to my network.
I have an older plug in version of Airport Express and am trying to connect it to my wifi network to boost coverage but it is not connecting to my network.
What is the make & model of the wireless router that you are trying to "boost" with the AirPort Express? Is your Express an 802.11g or 802.11n model? Is the connection between routers going to be a wired or wireless one?
Similar Messages
-
I have an iPhone4 that I just upgraded to iOS6 and now I am unable to join my wifi network.
Every time I try to join, it automatically takes me to a page that at the top says "Log In", but it says that this page cannot be found. My only option is to click the cancel button in the upper right hand corner. Which then just makes it so that I have not joined my wifi.
I have tried forgetting the network. restarting my phone, and then trying to rejoin the network. But that hasn't worked either.
What can I do?Joel, that is correct...the Digital Milenium Copyright Act has been interpreted such that jailbreaking a smart phone is illegal as it is a copyright infringement punishable by a fine of $2,500 per phone for an individual or up to $500,000 for an organized jailbreaking activity. This went into effect January 26, 2013.
-
I've tried this several times with the same results.
I press and hold the reset button until a fast blinking amber light. AirPort Utilities picks it up and identifies it as AirPort Express 802.11n.
I then "Replace the previously selected profile with default settings" and indicate that I want the AirPort Exp. to join my current network and input the information.
At the last step, Utility says an error has occurred and that it can't find the AirPort.
Any help would be appreciated.Assuming it is not simply broken, a slowly flashing LED probably means the TC is not receiving an IP address from the modem. Make sure you power down your modem whenever you change what is connected to it.
Having to unplug the Ethernet cable from the TC and plugging it in to your Mac repeatedly so that you can communicate is tedious enough, but endeavor to add the power cycle exercise to that action. -
If I am using my Airport Express to play an album using Airplay in my bedroom, is there a way I can also play a different album on the Mac that iTunes is located on?
No.
-
Will be renting a condo with an ethernet cord. Can I plug this into Airport Express and have wifi?
I will be renting a condo with an ethernet cord available. Can I simply plug this into my Airport express and have wifi for computers, iphone, and printer?
As long as the Ethernet cord leads to a router connected to the Internet, then yes, it will do all that.
What you want to do is the reason a lot of people bring an Airport Express with them on trips. They plug it into the hotel room Ethernet port and bam, their laptops and phones have wireless Internet.
If you don't already have a password on your Airport Express, now would be a good time to add one, especially if Internet usage is metered. Just to keep others from getting onto your network. -
I have an older iMac G5. I updated the computer and itunes updated also. Now it won't come up It wants a updated quicktime. The computer isn
't letting me do that. I need an older version of itunes. can anyone help?iTunes 10 works with Leopard on a PPC Mac if you have Quicktime 7.7 available here:
http://support.apple.com/kb/DL761 -
I have an older Mac desktop, version 10.5.8. I need to reinstall Image Capture. Help, please.
I have an older Mac desktop, version 10.5.8. I need to reinstall Image Capture. Help, please.
Do you have the original gray system disks that came with the computer, or a full retail install disk set for 10.5? If so, you can use a utiltiy:
http://charlessoft.com/pacifist_olderversions.html
to extract just Image Capture from the disk and install it. Otherwise, you would have to reinstall the entire OS -
The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer -
I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?
Hi Maryan,
Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same. -
I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.
Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included. -
i have version 4.3.3 and am updating my iphone software. I am updating it on a computer that is not mine, as i only have an iPad. Can I do this without loosing my music, apps, photos, etc?
You do see the devices heading on the left sidebar? If you don't see the sidebar, go to View>Show sidebar in the iTunes menu and then check to see if the device appears.
If that isn't the problem, go through the troubleshooting steps. It could be the Apple Mobile Device Service issue.
iOS: Device not recognized in iTunes for Windows - Support - Apple -
I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?
Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0 -
I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.
Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock
Maybe you are looking for
-
I can't view my JApplet in appletviewer. Why?
I tried writing a simple program on my own and i compiled them in JPadpro 3.6. there is no error. no warnings too. but when i run the JApplet thr. appletviewer, the comments stated in the viewer was: Start: applet not initialized i can't find what's
-
Help!!!! Need help figuring this out
-
SAme message corrupted on MacBook but not on Imac using same .MAC account
I have recently upgraded to Leopard on both my iMac and MacBook. I have a .MAC account and use Mobile. I have one message (received yesterday) that looks fine on my iMAC but is corrupted on my MacBook. I also upgraded to Time Capsule and had just com
-
Livecache update - ERROR 30707 in SAPAPO_RESET_GLOBALS
Hi, During a SCM 7.0 SR1 upgrade, we need to update the livecache to 7.7.04 (29) This runs just fine until the LC needs to be initilialized: switch liveCache state to ADMIN Value of MCOD-Parameter is NO setting up unicode liveCache... cannot finish i
-
Batch replacing files in After Effects
I have a project that is a series of time lapse shots that was edited in Final Cut Pro. I used jpegs that I created from the original raw files (.cr2) to do the edit. I used Automatic Duck to send the edit to After Effects (CS5) to do some things I