HT1199 Two new programmes loaded from different companies fail when I try to use them -quit unexpectedly messages

Two new programmes from differant companies have loaded ok but when I try to use them I get an imediate error message -quit unexpectedly- and the programme closes. What is wrong?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Similar Messages

How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
LN

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

If one drive works and the other doesn't that points the finger at the errant drive. They are cheap, replace it. To check formatting right click it in Finder and choose Get Info and look for Format type. Finally do you eject it when removing it or do you just pull it out of the USB connection?

I have apps that I downloaded from a friends computer and some from my own. When I try to sync them to my computer it will only sync my apps and save them. Is there something I am overlooking to get all of them to sync and save.

I have apps that I downloaded from a friends computer and some from my own to my ipod.When I try to sync them to my computer it will only sync my apps and save them. Is there something I am overlooking to get all of them to sync and save

Your friends Apps are not your Apps... If you want those Apps you will need to Purchase them.

Why do the colours from Adobe Color Theme creation change when I try to use them?

I've been exploring the Adobe Color Theme creator in InDesign. There are the three tabs: Create, Explore, My Themes. In the create tab I can create a theme of colours, get the combination just right, and then save my new theme. However as soon as I save any colour out to the swatches, the colour changes! It's driving me nuts.
[Original Colour] -Colour it comes out as-
[green turquoise] -prussian blue-
[strong, bright red] -darkish orange-
[warm purple] -faded dark mauve-
My best guess was that maybe the colour profile of the document was set to CMYK and that the colour themes work in RGB, but as far as I can determine it's just "North America General Purpose 2" and the Working Spaces include both RGB and CMYK. Therefore I'm stumped. I do not have the expertise to figure out what is going on and these are significant colour changes to have a really strong, vibrant colour palette turn into something much more muted.
And if this piece of information is of any use, my yellow doesn't seem to change at all.
Any ideas please? I've tried searching for it, but maybe I'm not putting in the right combination of keywords. Hopefully I'm just being obtuse and someone will tell me to put a checkmark in a box somewhere.

There are some slight value changes between the Theme and the Swatches, but we're only talking a change of 1 or 2 and so the colours appear to stay true now. Total pain to have to do this extra little step every time. =)
a huge, glaring, and sloppy problem which really ought to be fixed by Adobe pronto.
You can batch change the color mode of swatches if you select all of the swatches and double click them. Or, you can simply leave the Lab values and let the conversion to the correct CMYK space happen when you export to PDF.
I'm guessing the fix won't be coming soon. The original Kuler app had the same color management problem. It's hard to see how they will fix it and keep Color Themes as a cloud based web app.
When you convert the Lab swatches the CMYK values you get will depend on the document's assigned profile, so if you make two document's with different profiles assigned you'll get different CMYK values when you convert the Lab values. Here is US SWOP vs US SNAP
Newsprint
SWOP

I got two iTune gift cards for a gift, but when i try to redeem them, they say that an error has occurred. i havent used them before. what should i do ?

I've recived two iTunes gift cards for the holidays from a family friend in the mail.
When i got the cards i scratched it off, to get my pin number. When i put my pin number into my phone / laptop.. both of the cards said that there was an error with the card.. which i dont understand since they were new. I dont know how much money was on it all i recied were the 2 cards.
can you please help me out asap?
thank tou
Laura.

Hi there Laura Petrau,
You may find the information in the article below helpful.
iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292
-Griff W.

I have a folder on my iPhone called "photos from my mac" and when i try to delete them they won't delete. how do i get rid of them?

i can't delete the album on my iPhone called photos from my mac. help!

Those were added by syncing from iTunes and need to be deleted by syncing again using the instructions quoted below from Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support
Delete synced photos
In iTunes, locate and click on your device.
Click Photos.
Choose "Selected albums" and deselect the albums or collections you want to delete.
To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
Click Apply.
Learn how to delete photos and video synced from iTunes when you can't access the originals.

TS1702 My ipad is showing updates available from App store but when I try to update them it is telling me this is not available on the us store so switch to uk store, I am baffled

App store on my ipad is showing update, when I try to update them I get a message saying I need to change to the uk store? dont know what to do can anyboldy help
Lynne

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".

Purchased Itunes Match several months ago, loaded all my music, now when I try to use, says Im not subscribed! I already paid for it. Help

How can I get assistance with this?

I have the same problem. I subscribed 11/16/11 and I just got the message today that I'm not subscribed.
iPhone 4 with iOS 6.

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

TEM Billing from different companies

Hi all
We recently split our operations into two separate companies. We created a new enterprise structure (new company codes, new sales organisations and new cost centres) and logically split all operations to operate according to this new set up (i.e. there used to be one company, now we have company A and company B operating on the same SAP instance).
We did this setup while we were still on version 4.6C. One of the problems we faced is that we are using Billing for Training and Event Management. We now had to cater for billing for training from both companies depending on who offers which course. In the configuration for billing there is only one sales organisation that can be set up. In 4.6C we overcame this problem by allocating a specific cost centre number to the Event Type. This cost centre belonged to one or the other sales organisation and therefore we managed to successfully bill from the two different companies.
We recently upgraded to ECC6 and this scenario no longer works. When you debug transaction PV17, it assigns the sales organisation specified in the configuration and completely ignores the fact that you have assigned a different cost centre from a different sales organisation to that training event type.
I would like to know how I can bill for different training events from different companies. Any ideas will be most welcomed!
Regards
Liezl

Hi
Herewith an update:
You need to maintain infotype 1037 of the business event type (Billing/Activity Allocation) with the appropriate sales organisation and distribution channels.
This then allows you to bill from different companies.
Regards
Liezl

Why are these classes equal? Loaded from different classloaders.

I thought that classes loaded from different classloaders were seen as different in the JVM? But this code prints true to every check:
try
     Class c = new URLClassLoader( new URL[] { new URL( "jar:file://home/tests/test.jar!/" ) } ).loadClass( "Test" );
     Class c2 = new URLClassLoader( new URL[] { new URL( "jar:file://home/tests/test.jar!/" ) } ).loadClass( "Test" );
     System.out.println( ( c == c2 ) );
     System.out.println( ( c.equals( c2 ) ) );
     System.out.println( ( c.getName().equals( c2.getName() ) ) );
catch (Exception e)
     e.printStackTrace();
}

DrClap wrote:
The more unbelievable thing is that this:
System.out.println( ( c == c2 ) );prints "true". That shouldn't happen, and it's nothing to do with facts about classloaders. It shouldn't happen because "new" called twice should produce two different objects, no matter what kind of objects they are.
I didn't try your code because I would have had to spend a couple of minutes creating suitable jar files. But did you actually run that code? Or is it a reduction of some larger piece of code and you just assumed it would do what you said it does? Because I don't believe that.I actually ran the code and every line DID print out true. This is in Java 1.5.
I figured out why they're all true though - it's because the jar file was in the classpath, so the classes were loaded by a different classloader (the same one). When I put the jar out of the classpath, the statments printed out like this:
//false
System.out.println( ( c == c2 ) );
//false
System.out.println( ( c.equals( c2 ) ) );
//true
System.out.println( ( c.getName().equals( c2.getName() ) ) );I agree on the first one printing true but I seem to remember something about how they changed that rule in Java 1.5. I could be wrong but in c++, that would be a completely valid true statement (assuming your class implemented the "==" operator), so maybe they changed it to be in line with that?

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. I have use all the suggestion including unistall and reenstall a new down load from appl

I'm trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. It was English for over 2 yrs. I have use all the suggestion including unistall and reenstall of a new down load from apple.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

HT1199 Two new programmes loaded from different companies fail when I try to use them -quit unexpectedly messages

Similar Messages

Maybe you are looking for