HT1206 my other computers have fried or have been broken. so how am i supposed to deauthorize those computers if i cant even turn them on? and why is there a maximum to how many computers i can authorize my account to?
why cant i authorize my account to this computer? i cant turn on my other computers with this account authorized because they were fried and broken so how am i supposed to deauthorize those computers?
"why cant i authorize my account to this computer?"
No idea, as you have not explained your problem. What happens when you try to authorize it?
" i cant turn on my other computers with this account authorized because they were fried and broken so how am i supposed to deauthorize those computers?"
You cannot until you reach the limit of 5, then you can deauthorize all.
iTunes Store: About authorization and deauthorization
Similar Messages
-
I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you
You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
my iphone 6 plus wont connect to wifi, i cant even turn wifi on its gone grey and i cant select it, does anyone have any ideas??
it happens on IOS 8.1.3, so I try to update the IOS to be 8.2 cause I think that it just the old IOS problem, but it still be the same that it still gone grey
cant even turn on or off the wifi in setting pageTry the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support- http://www.apple.com/contact/ -
My location services appears to be locked. They are in light grey and will not let me turn them on and off. New app requiring GPS i can't use due to this. How can i reset or fix?
Double check your restrictions for location service.
settings - genral - restricitons. -
Why is there no "none" option of payment methods? , Can not modify About Me!
Why is there no "none" option of payment methods? , Can not modify About Me!
How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
Cheers, Tom -
How is the resolution variable or when would we change the resolution of an image and why?
How is the resolution variable or when would we change the resolution of an image
and why?It all depends on the output:
* for viewing on screen 90 -120 ppi
* for printing on a laser printer 180 -300 ppi
* for printing on a desktop printer 240 - 300 ppi
Some people claim 360 ppi is optimum but I don't see any difference compaired to 300 ppi at least not with the naked eye... -
iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.
Hey Angus97,
These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh -
How do I ensure all emails are stored on my iMac even if I open and delete on my iPhone?
How do I ensure all emails are stored on my iMac even if I open and delete on my iPhone?
Depends on the type of email account, do you know which yours is, POP or IMAP, if you don't know tell me who is your email provider
-
How are you supposed to REPORT THE PROBLEM when it DOESN'T EVEN WORK!!
I clicked it as I got a receipt for something that HAS NOT EVEN BEEN BOUGHT ! (It's funny how apple try to charge me twice for something when I work nightshift and my phones switched off!)
and all that happened was it came up saying "too many HTTP redirects" .
And it won't let me report it ! XGo here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards. -
This morning Voice Over started running on my computer when I turned it on. I did not turn Voice Over. Could I have hit a combination of keys on the keyboard that accidentally turned it on? When I went to System Preferences and chose Internation Access it showed that Voice Over was not even on. I turned it on and turned it off to reset it, and it is still running. How is this possible, and how to I get rid of it?
TrumpeterI went to System Preferences, Universal Access, and then VoiceOver for the fiftieth time after you said to check VoiceOver Utility to see if I saw anything odd. On The VoiceOver screen it was actually saying that VoiceOver was on. All day the VoiceOver option was off, and the computer talked to me everytime I logged in. I tried turning it on and off and it still talked to me. Now the VoiceOver option was on, so I turned it off again. Weird! I had tried several combinations of keys again and again as the tech instructed me to do, but we couldn't turn it off, but I have to admit that after my phone went dead I tried everything I could imagine; so maybe in trying to turn the talking off I turned the VoiceOver Option on. Anyway, somewhere along the way it quite talking to me.
Let me ask you a couple of questions. When I clicked on VoiceOver Utility, after turning VoiceOver off, the screen message says: Speak the following greeting after login: Welcome to Mac OSX. VoiceOver is running. I was assuming that it meant VoiceOver was running. That is what it is saying right now. It's not talking to me anymore, but the screen says this whether the VoiceOver icon is on or off. What is this all about. Is it telling me that Voice Over is still running when I see this, or what? After all, even when the OFF icon was chosen the computer still spoke to me when I hit each key upon logging in. After you read the rest of this you will understand why I am asking if it is still running even though it's not talking to me.
There is a box that appears and says "Portable Preferences for (Jane Doe) have been detected on (JaneDoe). Would you like to use them? Always Use / No / Yes What does that mean?
Last but not least. I was looking around and was clicking on Application, Documents, etc. When I clicked on Documents, only four things came up even though there are tons of documents on my computer. All four of them have to do with VoiceOver, and they were labeled as documents. One of the documents had this in it:
SCRConfiguration Cursor Tracking KBToVO
SCRConfiguration Cursor Tracking VOToTXT
SCRConfiguration Cursor Tracking VOToKB
I'm not a computer genius, so maybe I just don't know what I'm looking at. Is it normal for something like this to be found under documents? All of these were dated today, and the problems started today. I haven't gone to bed yet, so even though it's after midnight it's still the same day to me. Anyway, none of the documents were dated before this problem started. On top of that, I have tons of documents on my computer, but when I clicked on Documents, those four are the only ones that showed up. After trying to decipher the programming language on them, I went to click on Applications and hit Documents again, and all the documents came up. I scanned the list and didn't see them, but there are so many documents on here that I haven't had time to slowly go over them to see if I missed those four documents somehow. Since then I haven't been able to get just those four to appear by themselves again.
Now, is it possible that I still have a hacker and he knows through a key logger everything I am communicating to you and the Apple Store, Maybe he did made a mistake and accidentally caused this problem, and through logging every key I have typed he has learned about his mistake and fixed it. He could still be key logging me now without me knowing it; or maybe he removed the keylogger, because he know I'm taking it in to the Apple Store and can tell them now exactly what to look for.
It is either a hacker, or I have a very vivid imagination. What do you think? -
When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?
Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.
-
How to make it so when an app opens, it slides to a new desktop and opens it there.
when i open an app it just opens on the current desktop i am on, how do i make it where it slides to a new desktop and opens it there?
Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.
-
I cant save a fillable PDF and its saying there is a bad parameter. How do i fix this?
cant save a fillable PDF and its saying
Hi annerleavitt,
That Bad Parameter error is likely telling you that the PDF you're trying to fill in is damaged/corrupted. Where did you get the PDF? And are you opening it in Reader or Acrobat (what versions?).
I look forward to hearing back from you.
Best,
Sara -
I want my iTunes library to be saved and stored in my music documents in my laptop like they would be if you bought the songs but how do I get iTunes to do this?
Hi kirstynugent,
If you are having issues moving the musing in your iTunes Library from your old computer to your new computer and making sure that it is located correctly, you may find the following article helpful:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Cheers,
- Brenden -
I have deleted many unwanted files and apps and yet the available space keeps depleting every time i am using my Macbook Pro. I believe under the OS 10.7.4 one of the features is it backups or has backgrounding features which uses memory. Sometimes even when i hv 8GB space after using my Macbook Pro for say 2hrs surfing internet and using Pages which has a "Save Version" feature suddenly my 8GB goes down to 300+MB only and it starts prompting me "My Startup Disk is almost full" once it reaches 1GB space left. How can i get more space.... Please someone can help me? Do i need to re-format my hardisk??!! Any help out there is greatly appreciated.
My original HD is 320GB. And i don't hv too many Apps installed. I do have abt 50-70apps. I do have many photos and videos stored in iPhoto's Library though.One thing I've noticed is that a shared tab pops up when I open the finder under "favorites" with a random connection. It's called hp68b... None of my friends that I live with have this and we all use the same internet. Two days ago when I would click it and click get info, it said it was a pc. When I checked it today it said it is a "sharepoint" and looks like a harddrive.
I took it too the store after i spilt water on it but when I got it back it ran perfectly fine. I don't know a lot about computer so if somebody could help me. It says I'm connected to it and I can't disconnect or delete it. I don't know if the guy at the computer store put something in my computer and is sharing all my files.
Maybe you are looking for
-
How to use the direct bytebuffer in JNI? Accessing JDBC from C application.
I am working on a project to access JDBC Driver within C application. The invocation JNI is used. To get better performance, I use the preparedStatement for dynamic sql. This need to transfer much parameter data from C to JDBC for PreparedStatement o
-
Https with mutual authentication
I am trying to authenticate my java client using a client certificate. My java clients work fine so far, I can send http post/get and get a response from the server. An http 403 response The Problem seems to be that I imported the client certificate
-
In my projects they are planed to use pl/sql in case of sql statements.That means all insert/update/delete/select. This project is developing .net/oracle.So in the middle layer they are calling Procedure in case of SQL statemets. My doubt is in produ
-
Apple, answer me... Shall I make it that this iPhone 5 I have will be my last ever apple purchase? until you get your act together and continue to support properly all the functions on ios6 .. for wghich - i remember I paid REAl money, not Monopol
-
Hi , we using jdev1.5 with WL server 10.3 . we have 3 AM in our application . when we deploy the application on weblogic and after 8 users logedin we get this error : weblogic.jdbc.extensions.PoolLimitSQLException on the server console i read the doc