HT1212 How can I get my ipod to work if I forgot the password?

How can I get into a ipod touch that I bought from someone who forgot the password?

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up    
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store    

Similar Messages

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

    I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

    Fixed it!
    1. Made sure itunes software was up to date
    2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
    3. Connected to itunes
    4. Pressed restore and update ipod
    Update successful and ipod taken out of recovery mode

  • How can I get into my i-pod if i forgot the passcode?

    How can I get into my i-pod if i forgot the passcode?

    connect your ipod to your mac and the summary page on itunes will show up. On the middle of the page it will say restore, click on it follow the prompts and you should be good:)

  • How can i get back my app store if you forgot the restriction code

    how can i get back app store applicatin if you forgot the restriction code

    To remove the Restrictions passcode you will need to either...
    Restore the Device as New...
    http://support.apple.com/kb/HT4137
    OR...
    from a Backup created Before the Restrictions Code was set....
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • HT1212 How can i get an ipod undisabled?

    How can i get an ipod touch undisabled?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • How can I get my iPod to update when it says the server cannot be connected?

    Whenever I try to update my iPod it says, "The iPod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." It does this every time. How can I get it to update? Any help is much appreciated, thanks!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Some how i cannot get my ipod to work it is where the apple is there and on itunes it said that i do not have a ipod at all i have a touch

    i cannot get my  ipod to work i cnnot turn it off or start it it is stuck with the apple on it

    - Try resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Try connecting it to your computer and restoring it.  You may have to place the iPod in recovery mode.  For recovery mode see:
    http://support.apple.com/kb/HT1808

  • How can i unlock my unlock my iphone 4 i forgot the password?

    how can i unlock my iphone 4 i forgot the password?

    If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If your device is running iOS 7 and you set up Find My iPhone, you'll need to enter in your Apple ID and password to activate the device after restoring:
    http://support.apple.com/kb/HT5818
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How can I get my iPod to work with its updater?

    Hey all, I have a 4G iPod, and it isn't recognized by iTunes. I connect it to its dock, and open the updater. The updater freezes and won't work UNLESS I leave it alone, after a few minutes the updater recognizes an iPod, but not any information about it (like the serial number or software version). Knowing this, I have sucessfully restored my iPod, only to find that the same problem is still there. The iPod shows up in "My Computer", but I can't get into it. Also of interest, whenever I connect the iPod, AutoPlay immediately starts, and asks me what I want windows to do every time I connect the device, but it doesn't show me a list of options...perhaps AutoPlay is messing the iPod-iTunes connection up? Can anyone help? Tried tons of thing on the site already.
    Thanks
    IBM ThinkPad T42   Windows XP Pro  

    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Otherwise you need a working dock connector and computer wither iTuned and internet connection
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • How can I get my iPod to work again?

    i forgot the code to my iPod because I havent used it for along time I tried it too much and it says connect to iTunes but I can't because the dock connector in the iPod is broken.I really need to use it for something help :)

    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Otherwise you need a working dock connector and computer wither iTuned and internet connection
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 How can I access my iPod when I don't have the passcode?

    My daughter changed her passcode on her iPod and didn't write it down. How can I access it? Please help!

    For how to place in recivery mode:
    Recovery Mode
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How do i get my ipod to unlock if i forgot the passcode to get in

    i have a 16GB ipod touch and i turned on the passcode lock but after restting it i forgot the passcode so now i cant get to the home screen and i need help i figure out how to get into my ipod sice i forgot the passcode. PLEASE HELP?

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New.

Maybe you are looking for

  • No Export options and Place not working correctly. InDesign CC 2014.

    I cannot place a file into a frame with cmd+d or File > Place. I get the preview on the cursor but won't place into a frame which I need to keep the frame effects and size options. - Also - I am not getting any options on Export - to change the outpu

  • How to publish from iweb using snow leopard

    Hi, Having had my iMac for some 4.5 years I finally have a real reason to use iweb and now can't work out how to publish from it. I only have a mobile me option come up when I click the publish option. My mobile me account was deactivated some time a

  • Form personalization to check whether anything to save

    In the Oracle Financials Receivables application Receipts form (ARXRWMAI) there is a Distributions button that launches the receipt distribution screen. If a user makes changes to the distribution lines and then selects the Cancel button or X to clos

  • What is the difference betwee STRUCTRUE AND INTERNAL TABLE

    what is the difference betwee STRUCTRUE AND INTERNAL TABLE

  • Coding/meta data appears in email body

    I am sending mail to a particular client only they see all the meta data/coding within the body of the email. This is causing great confusion. It only happens with one client and I don't know if it's a Mac Mail issue (i.e. my email) or their receivin