HT1338 I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open. What's Zup?
I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open. What's Zup? Help!
Also when I do the system update it's not giving me an update for the latest Snow Leopard. I never knew that was available until I started looking around this site and it seems that since I have the internal dual core I should be able to update to mountian lion...is this correct? Will someone please help me and walk me through this. I love my mac I want to have it running like it should be.
Similar Messages
-
after downloading ML on my macbook pro, it could not be installed. it says that macantosh HD is damaged and ML can not be installed. what do i do?
Boot from your install disc so you can try and repair the startup disk.
Help here > Using Disk Utility to verify or repair disks -
Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have repeatedly downloaded itunes but whe I try to run it I get the message "The registry setting used by the itunes drivers for importing and burning CD's and DVD's are missing. Please reinstall itunes. I have done this dozens of times
Try removing and then reinstalling all the Apple software using:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
HT1338 I am running 10.7.3 Problem with Software Update
When I run Software Update, I get a list of programs to update.
All of the updates download.
After computer restarts, I get a message saying updates cannot be installed.
Message says downloaded files may have been corrupted.
My internet connection is FIOS.
I have no problem downloading items via iTunes.
I have repeatedly tried to update, but to no avail..
My computer is a MacBook Pro.
I've run Disc Utlitity, everything is fine on my start up disc.
And I have plenty of room on my HD
Any ideas?
Many thanks,
BWKappy wrote:
Try downloading the standalone updaters from support.apple.com/downloads/.
And perhaps download the 10.7.4 Client Combo Update. It's a bit larger but may help repair any issues you are having, and then try Software Update again, although I am like Kappy and prefer to check and then download directly from Apple Suport.
Cheers
Pete -
HT1338 Trying to update iPhoto '11, but its stuck on pause and has been since last night?
This is a new laptop and I"m lost. I tried to click on it to unpause it like on my iPhone. It goes with out saying that didn't work.
That's an App Store question. I'd ask on that forum.
-
My OSX Mountain LIon is still downloading after the download was initiated 12 hours ago. What's wrong?
Possibly nothing. The whole thing relies on the amount of people currently doing the same thing as you and also your internet connection, remembering that WiFi is extremely slow.
How far through the download is it? If it's nearly done and at least still moving along I would be inclined to leave it. If not then you can stop it and start it all over again. Just be warned that if it is simply a connection issue then you might just be re-starting your clock
PS - I've seen the download take over 60hrs before. -
I bought my ipod nano today and I downloaded the user manual. It says that in order to use it for workouts all I need to do is calibrate it for height and weight...however, there is only a pedometer setting and no run setting. Why is this? Can anyone help??
Connect your Nano to iTunes, click the update button on the summary screen. Once that is done, you will get what you expect.
i -
How do i run my epson stylus r2400 with snow leopard?
i recently updated my imac with the snow peopard software, but now my epson r2400 stylus printer will not work with the computer. at first the color was off, adding a blue cast and over saturating. so i went to epson and did additional updates as suggested in other posts. one i did this, the printer would not work at all as if the computer wasn't even connected. is there a way to run my r2400 with snow leopard or is time to upgrade my printer? and if so, what is a comparable printer that would also run with mounain lion?
thanks!Hello taracass3,
You may want to remove any existing queues for the printer in your Print & Fax preferences pane, then re-add the printer. If it's still not working correctly, I'd recommend resetting the printing system.
To delete a Print Queue
Click the print queue you would like to remove from the list in the "Printers" pane.
Click the - (minus) button below the "Printers" pane.
Click "Delete Printer" in the "Are you sure..." confirmation sheet.
To reset the printing system (if necessary)
Control-click or right-click a print queue in the "Printers" pane.
Choose "Reset printing system..." from the contextual menu.
Click "OK" in the "Are you sure..." confirmation sheet.
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
Cheers,
Allen -
No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?
this is what you need to do to exclude everything apart from desktop.
on time machine preferences, click on Options
click plus sign, on the new window, click macintosh HD
do a Control + A then deselect users then click okay
go to options again, plus sign, go to users, control +A then deselect your user account
go to options again, plus sign, go to your user account, control + A, deselect desktop
start the back up. -
I have a MacBook Air running MacOS 10.6.8 and am using FireFox 3.6.17. I get an auto upgrade popup suggesting that I upgrade to 3.6.20. However, when I select to perform the upgrade, the download box comes up and acts like it is downloading, but it never actually downloads the upgrade. I tried version 4.0, but that didn't work right, so I would like to say with version 3.6, but would like the latest upgrades if possible.
Ran the OS X verify and repair util it fixed a fair few permission issues, then tried to add in a 2nd sample in logic - re-indexed still showing the first initial sample.
-
Running MacOS 7-8-9 in MacOS 10.6
Hello. Does anybody know how to run MacOS 7, 8, or 9 in MacOS 10.6? I have a couple of important applications that were designed for MacOS 7-9 but that will not run in MacOS 10.6. Thanks.
the only possible way to do that is via emulation software like sheepsahver
http://sheepshaver.cebix.net/
but I suggest you either look for more modern programs that do what you need or get a second hand PPC mac (they can be had extremely cheaply) and use it to run whatever OS version you need directly. -
OpenGL 1.3 on iMac G4 700 MHz running MacOS X 10.4.11
Morning.
I want to install and play Glest on an iMac G4 700 MHz running MacOS X 10.4.11. The machine is equipped with a Geforce MX-2. This hardware normally does not support OpenGL 1.3. I do not know whether it's necessary to have a hardware that supports OpenGL 1.3 or thats sufficiant to have OpenGL 1.3 installed.
Therefore: (How) can I install OpenGL 1.3 on this machine?
TIA and kind regards, Friedrichsig wrote:
Have you googled, "OpenGL on a Mac"?
Yes. I did. And I've found a lot of stuff from programmers, a page by Apple explaining that the Geforce MX2 does support OpenGL 1.1, but no user friendly answer, whether it works or not and how to install OpenGL on a iMac G4 700 running MacOS X 10.4.11.
Kind regards, Friedrich -
How to run macos universal built binary on 32 bit boot of macbook pro
I have lot of doubts using universal built binary. I didnt get required information about universal binary from google or documentation provided by macos on universal binary.
Here are the steps I followed:
1) I compiled my application selecting architectures i386 and x86_64 (from xcode).
2) I see application is built as fat binary which supports i386 and x86_64 (using file command).
TestApp: Mach-O universal binary with 2 architectures
TestApp (for architecture x86_64): Mach-O 64-bit executable x86_64
TestApp (for architecture i386): Mach-O executable i386
3) Now the problem is when I boot 32 bit kernel on macbook pro and try to execute my universal binary, it is behaving as 64 bit architecture application( sizeof(long) and sizeof(char *) is coming as 8 bytes).
For this I found a way how to run universal binary selecting architecture:
arch -i386 ./TestApp
This selects i386 architecture from fat binary and runs the application(sizeof(long) and sizeof(char *) is 4 bytes).
However, my requirement is I should run universal binary on i386 as i386 application without using arch command.
Are there any xcode settings to be made to make universal binary run as i386 application on 32 bit macos boot ??? Can we select architectural preferences for running universal binary application ??
Please help.
Regards,
SumanthThis is the thing I am doing with my application:
ioctlBuff.pvInputBuffer = Address of some structure;
ioctlBuff.ulInputLength = sizeof(some structure);
ioctlBuff.pvOutputBuffer = pOutputBuffer;
ioctlBuff.ulOutputLength = dwOutputBufferLength;
and calling: ioctl((int)pDevIO->m_hDevice, dwIoctl,&ioctlBuff);
If I make sure driver is hit with the ioctl code I am calling(by maintaining sizeof third parameter in _IOWR('k', 0x854, typedef structure) to be same in driver and application), driver is getting hit with that ioctl code.
And here is the main issue:
now driver does:
copyfromuser(&sRdmBuffer, psIoBuffer->InputBuffer, psIoBuffer->InputLength), it fails to copy as InputBuffer passed by user space is 64 bit pointer!!
I conformed values i pass to copyfromuser are valid.
BUT I DONT SEE ANY OF THESE ISSUES IF I USE
arch -i386 ./TestApp
for my universal binary as i386 set of text code is picked for execution!
Thats why I wanted to load i386 arch of my universal binary. I dont want to use arch command.
Maybe you are looking for
-
How can I remove seemingly "non-deletable" calendars on my iPhone 4S?
How do I delete multiple calendars from my iPhone that were left in the wake of switching to iCloud (from MobileMe) then back out-since I'm not up to 10.7 on my Mac yet?
-
Guest portal certificate on ise
Background: Customer don't have an internal DNS server. We are using the google DNS server, which doesn't resolve the internal guest ISE server name. Hence, we are directly using the ip-address in redirect URL and guest authentication portal. Q
-
How reach 'Web Service Clients' through NWA
Hello guys, Cannot perform this steps in NWA (Visual Admin doesn't work for CE). See nothing that looks like 'Web Service Clients' there... 1. Start the Visual Administrator and select the node Server <x> / Services / Web Services Security from the C
-
i am using 4.6C . when user gives order no he want to get ORDER_HEADER,ORDER_OPERATIONS,ORDER_COMPONENTS i found out the Bapi BBP_PMORDER_GET_LIST.my question is in this function module tables tab there is a parameter I_order_select in that there is
-
I don't understand how you expect publishers will be able to push an update to all the markets they publish to with enough time to get their user base to update before they're totally screwed. One month? You do realize that even updates pushed to A