HT1414 how do i get into my ipad if i do not know the passcode and i dont want to erase everything on my ipad please help

how do i get into my ipad if i do not know passcode and i dont want to erase the data i have on it

Hello Mariemonkey82
Follow the steps in the article below to put your iPad into recovery-mode so that iTunes can restore it.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G.

Similar Messages

My ipad is disabled and says connect to itunes. I dont know the passcode and I dont have access to a computer , can I restore it without connecting to itunes

My ipad is disabled, I dont know the passcode and I dont have a computer to connect to itunes... is there anyway of reactivating ipad without connecting to itunes?

Sorry but no. You will need to get access to a computer with iTunes somewhere to restore the iPad. You can get help with this at an Apple Store if you have them in your area. Note that if you haven't backed up your iPad to iCloud, you'll lose all your data. Apps and other purchases from the iTunes Store can probably be re-downloaded.
Regards.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
Thanks

Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
Can you help me? Thanx

How can I get into my ipod 5th generation if I forgot the passcode?

How can I get into my ipod 5th generation if I forgot my passcode?

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT1212 How do you get into a ipod that you can't remember the passcode

How do you get into a ipod that you have forgotten the passcode?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How can I get into my account that I do not have the password for

A new Photoshop serial number was created for me earlier. It was put in an old account that was still on Adobe's books and I do not have a password for it. My current account has all of my software licenses but does not have the new one that replaced what is listed in my main account.

Customer service can merge both of your accounts into a single one.
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

How can I get into my iTunes if I don't know the answers I put I in for the security questons

How can I change security questions since I don't know the answers to the ones they are Asking me?

http://support.apple.com/kb/ht1808

How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the passwords I thought are not correct. What can I do?

How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the password I thought was set is not correct. What can I do to get back in or reset? Thanks

http://support.apple.com/kb/ht1808

I forgot my passcode, how can i get into my iPad?

I set a passcode and cannot seem to remember it. How can I get into my iPad without resetting it?

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer only
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

HT1349 How can i get into my iPad when i forgot my password?

How can i get into my ipad when i forgot my password?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

How can i get into my ipad if i forgot my password

how can i get into my ipad i forgot my password?

If you've forgotten your passcode, then if you connect it to the computer that you normally sync to you should be be to reset the device and then re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

How can i get into my iPad?

How can I get into my iPad? I can turn it on, but the keyboard won't pop up for me to enter my passcode

Glad that helped.
Wow, the thought of an iPad as a frisbee is ugly indeed.
Enjoy your iPad and I hope it continues to work successfully for you.

HT4623 i have disabled my new ipad by entering wrong code, how do i get into my ipad?

i have disabled my new ipad by entering the wrong code to many times. How do i get into my ipad now?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg.

HI,
When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. I seem to have tried and read so much but just can't figure it out. How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. Or do a have to use a different system? I have Adobe Bridge. Or can I upload directly into photoshop?
Also how do you install dmg's properly I am having problems installing them?
I have a Mac OS X 13 inch Version 10.6.7
Advice desperately needed
Thanks
Nlouis

Do you have Aperture installed? I found your model on a compatibility list; however, there was a note that it requires Aperture 2 to be installed:
http://www.apple.com/aperture/specs/raw.html
According to this excerpt:
To see a list of digital cameras with RAW-format support that are compatible with iPhoto, visit this Aperture webpage (any camera compatible with Aperture, Apple’s advanced photo editing and management program, is compatible with iPhoto as well)
which is at the bottom of this page:
http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht41627265.html
I may be wrong, but I interpret that info to mean you need Aperture 2 before iPhoto will work with RAW?

HT1414 how do i get into my ipad if i do not know the passcode and i dont want to erase everything on my ipad please help

Similar Messages

Maybe you are looking for