HT1430 how to reset my ipad 2
how to reset my ipad to start all over
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).
But if you want to wipe the device and start over then
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset
Similar Messages
-
I would like to reset my iPad to original setting. It keeps on asking me for a pass word. I put in the password I know but it keep on saying wrong passwird. What do i do? Please!
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. -
How to reset the iPad - the Location Services doesn't seem to work?
How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).
-
how to reset our iPad it is jammed
Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory -
How to reset your ipad passcode?
How to reset your ipad passcode?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Hi my boyfriend and I split up and we agreed I would keep the iPad. Since breaking up we are no longer on speaking terms but the iPad is still signed In to his Apple ID. Does anyone know how to reset the iPad without his password?
No, there is no way to reset the iPad without the AppleID and pasword.
See here: http://support.apple.com/kb/ts4515 -
HT1430 how to reset ipad if forgot password
How to reset ipad if i forgot my password
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How to reset my ipad from my computer
how do i reset my ipad mini cause its been misplaced
Clucktastic wrote:
How do I get back photos and videos in recovery mode?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
TS2771 how to reset my Ipad mini?
How do I reset my Ipad mini?
There is no reason to believe that a reset
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
will make it louder. But why not try it. -
How To reset iPad without having it synced to a computer and not knowing the password???? I changed my password and have forgotten it is there any way I can access and get on it??? Thanks
You must use a computer. There is no way around it for you.
You have to restore the device within iTunes. You can restore with any other computer, but you will lose everything on the iPad. You will have to download all of your purchased content again after you unlock the device.
You will have to use recovery mode
iPad: Unable to update or restore -
Followed instructions on how to reset iPAD passcode. Did not work. What else can I try?
Hi, Nancy, and welcome to Apple Discussions. You've posted your question about using an iPod in a forum devoted to iPhoto, an application that has nothing to do with iPods. You would probably find a better-informed audience over in the iPod discussion area, under the particular Pod model that you own. Good luck!
-
How to reset the ipad when it is disabled?
My 8 year old created a password to lock the screen and then forgot it. Since then, the ipad has been Disabled and we don't know how to reset it. We have read the instructions in the manual but since we never had it synced with itunes or ios7, there is no way to get it to reset. Any help would be greatly appreciated.
Thanksfallguy7 wrote:
... created a password to lock the screen and then forgot it. ... we never had it synced with itunes or ios7, .
See Here > http://support.apple.com/kb/HT1212
In particular... here... If you have never synced your device with iTunes -
TS3274 how to reset lost ipad password
Can anyone please tell me how to reset a password on an ipad as my little boy has forgotten it because he is forever changing it! It tells you to connect to itunes on the ipad but when you do a pop up in itunes comes up with 'this ipad needs to have a passcode entered to use it in itunes' or something very similar.
Many thanks in advance
ClaireRecovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
HT1430 How do I restart iPad when buttons are not responding?
How do I restart iPad when buttons are not responding?
GIve the reset another try; nothing to lose.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Safari Browser Crashes - How to Reset the IPAD-2?
I have the latest IOS 8.x installed on my IPAD-2 but haven't been able to get the Safari Browser to work for several months. When I click Safari it opens for a few seconds then shuts down...I'm not able to input any web sites.
I tried settings->safari->clear history & website data but it didn't help. I tried rebooting the iPad by holding down the home & sleep/wake buttons simultaneously for about 10 seconds until the Apple logo appeared, then let go & let the iPad boot up normally....Safari still won't open.
I guess I'd like to completely erase/reset the IPAD to it's original state in hopes of getting Safari to work. Is there a procedure?
Scott MoyerWell you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).
Maybe you are looking for
-
I need help. I don't know what to do.
-
Hi, I am evaluating sql developer. i tried to download the installer from http://www.oracle.com/technology/software/products/sql/index.html ( Oracle SQL Developer for Windows - 55.8MB). I followed the installation guide and explored it. I am also abl
-
Views Table (Goods Issue & Goods Receipt)
hi experts, i need to create a report on goods issue & goods receipt (from inventory module)...i have create a views on sql server to merge the two table IGN1 & IGE1 but to update this report i need to alter the views to update the reports... How can
-
Need help choosing new laptop, please.
Hello, I am in the market for a new laptop. My late 2008 MacBook Pro with C2D 2.66 GHz and 4 GB RAM. I think it is one its last leg and it is showing its age. In fact, I am really in fear that it will give out on me soon. It just shuts down randomly
-
ORA-12514 Error when using Net Configuration Assistant
I have recently installed Oracle 11g on a Windows 2008 server and am now trying to connect via the Oracle client on my local machine. Here is how I've been using Net Configuration Assistant so far: Listener Configuration The name of my listener is LI