HT204032 Can i get powernap on my Macbook Pro 13 inch mid 2012 with mountain lion running on it ?

Can i get powernap on my Macbook Pro 13 inch mid 2012 with mountain lion running on it ?

Welcome to the Apple Support Communities
Power Nap only works with Macs with flash storage, and it requires a firmware update that it's only supported on a Late 2010 or newer MacBook Air and the MacBook Pro with Retina display

Similar Messages

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Best preference settings for MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor

(using latest AE CC2014)
I have a MacBook Pro Retina Mid 2012 with 2.7 Ghz Core i7 processor 16GB memory Nvidia GeForce GT 650M 1024MB processor, doing some heavy AE renderings and just realized that this machine says it has 8 Cores? I'm had not yet turned on Multprocessing in Preferences Should I be?
Should I leave 1 or 2 cores for other applications?
RAM allocation per background CPU is defaulted set to 3GB
Also for Adobe Media Encoder: in preferences under Video Rendering /Rendere it is set at Mercury Playback Engine GPU Acceleration (OpenCL) is that the best config for this computer?

How much ram?
The best settings depend on what you are working on. Here are mine for a nearly identical system:
It's usually best to keep memory blocks in 4GB blocks. If my workflow is more in other apps I'll switch out other apps to 8 gb if things start to slow down. Because of my usual project settings I keep MP turned off on this machine, but for some projects I'll turn it on. If you decide to experiment to MP then keep an eye on the Actual CPU's that will be used and make sure the numbers add up. Other applications and Actual Cores should add up the the total in your system.

Macbook pro 15 mid 2012 with os x 10.8.4 taking long time to boot up

i am using macbook pro 15 mid 2012
2.6GHz intel core i7
8GB RAM
700GB hard disk
my macbook is taking much more time to start and get it ready its taking more than 1min 30sec
after system starded its hard to open any application(safari) for starting time some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
please tell me how to speed up my macbook pro

How much free disk space is available ??
Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > System Report then select Storage on the left under Hardware.
You'll see Available and Capacity. Make sure there's at least 15% free disk space.
If there's sufficient free disk space, check for login items. Open System Preferences > Users & Groups > Login Items
Delete any items there then restart your Mac to test.
some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
Try troubleshooting plugins and extensions...
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not a plug-in issue, select the Extensions tab. If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If that made a difference, uninstall one at a time, quit and relaunch Safari to test.

Bluetooth of the Macbook Pro 13 "(mid 2012) with poor signal and constant interruptions

I have a macbook pro 13" mid 2012, no retina display, with OS X 10.9.2 (Mavericks), and your bluetooth device it loses the signal when placing a barrier on the right side of the mac, the output of the optical drive (CD / DVD).
The signal is severely reduced. Just hold the Mac 's right, put my hand in front of the optical drive or turn the machine a little longer and the interference occurs.
I have a set of boxes bluetooth Sony sound and audio is constantly interrupted. I just put my hand in front of the optical drive, at a distance of about 30 centimeters (11.81 inches), and the bluetooth signal (RSSI) fell from -54dbm to -83dbm. The connection was lost completely.
Then I turned the right side of the Mac otherwise the speakers meaning and dropped signal of -54dbm to -75dBm. In this test there were no barriers in front of the optical drive. The audio suffered severe interference. The sound was inaudible.
I did other tests. The same loss occurs with the magic mouse and Apple keyboard bluetooh. Tests done in multiple locations without other nearby connections. Not occurring interference from other devices.
This is a feature of the bluetooth device mac or my computer has a hardware problem?
I thank anyone who can help me.
P.S.: Forgive me for my bad english. I used the Google translator.

Hi,
I have exactly your same problem with one bluetooth audio receiver from logitech and one Macbook Pro 13", mid 2012, all the others computer are working without problem in my room except of the Macbook Pro 13", i've tried of one from a friend of mine same model and same problem. I really would like to have a solution for this problem, i have tried with give more quality to the bluetooth agent, using a command from the terminal, but is not really working . Here if you want to try the link where the show it:
http://bencollier.net/2011/04/improve-compressed-bluetooth-audio-on-mac/

MacBook Pro 7,1 SLOW with Mountain Lion

Hi there!!
Well my problem is with my 2010 Macbook Pro 13" 2.4 Ghz Intel C2D is really slow and it always shows the spinning beachball even when open a new tab in Safari or any other app, when play a song or a video on iTunes it pauses several times, the video gets freeze but the audio continues.
Just a few months ago I upgraded the Ram to 8 Gb (Corsair 1067) and the Hdd to a 640 gb Toshiba, thinking that the problem would be the OS I made a clean install of Mountain Lion and the problem continued, ran the AHT and it shows an error with the Ram, I changed the wrong module with one of the 2 gb that the computer came with but the problem continues, I've been monitoring the system, temperature, ram, hd and cpu (made an stress test) and it all just seems to be fine, but is not...
Hope you can help me please!!

Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Does the 13" MacBook Pro **NO** Retina, come with Mountain Lion??

Ordered mine from Best Buy last week, according to their website, as well as Apple's website it should have Mountain Lion OS on it. It only has Lion 10.7.5 on it.
Is that how it should be?

If your Macbook Pro comes with Lion then it's not the latest revision. The last Macbook Pro to ship with Lion has the Model identifier 9.2 released in June 2012. The lasted revision has the Model identifier 10.2 released in Oct 2012 and ships with Mountain Lion

What's the power Adapter for Macbook pro 13inch Mid 2012

What's the power Adapter for Macbook pro 13inch Mid 2012 with core i-7, 2.9ghz, 8Gb ram?
AFAIK it should be a 60wat Megasafe power adapter.
But mine shipped with a 45Watt Megasafe. I got it as a Gift from my friend.
Thanks in Advance.

mmaumio wrote:
60W MagSafe power adapter with "L" style connector
This should be my Adapter right?
Yes.
There is a drawback in addition to taking a longer time to charge up your MBP. In unusual instances when using your MBP with power adapter attached, and running a very heavy load on the CPU/GPU, the MBP will require additional electrical resources in addition to what the power adapter can provide. It will then draw upon the battery. What this means is that using a 45 watt adapter, these conditions are more likely to occur.
Using a 45 watt adapter should not harm your MBP as such.
Ciao.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

How can I get Minecraft onto my Macbook Pro?

How can I get Minecraft onto my Macbook Pro? It is 15 inch Retina display, and it is Version 10.9.1 . I download the game, log in and press play, but as soon as it finishes loading, the blue bar goes away and nothing else happens!
It goes from this:
To this:
And on the development console it says this:

Hello EpicEmma,
I just had this problem today!, but i have a SOLUTION ,
right click the finder icon and click "go to folder"
type : "~Library/ Application Support
Find the minecraft folder, Backup your Saves, (drag the saves folder onto the desktop) *OPTIONAL*
delete the minecraft folder, not the application.
Open the minecraft Launcher (it will take a while to start up)
Put in login info and when its loaded up, press "play"
The blue bar will take a minute or two...
And then... it should start normally
U dont need to repeat the steps every time u open Minecraft. You can later replace the saves folder with the new one back to where it was whenever you want at the same place where it used to be before. Hope this helped!
-Macologist

I have a coleman Trek camcorder that creates AVI files, how can I get iMovie on my Macbook Pro to read these files?

I have a Coleman TREK camcorder that creates AVI files, how can I get iMovie on my MacBook Pro to Read thes files?

Try the following. there are others too
https://itunes.apple.com/us/app/free-video-converter/id464195348?mt=12

HT3924 how can i get airplay on my macbook pro mid 09 please ???

How can i get airplay on my macbook pro mid 09 please any body ???

You cant. Airplay is only available on MacBookPro's Early 2011 and later.

My mini mac has an airplay icon on the toolbar how can i get that on my macbook pro 2010

my mini mac has an airplay icon on the toolbar how can i get that on my macbook pro 2010.so i can mirror my macbookpro like i can my mac mini.

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

Can you get emoji on the macbook pro?

can you get emoji on the macbook pro? somebody please help me.

All you need to do is google:
http://forums.macrumors.com/showthread.php?t=608694
http://download.cnet.com/Emoji/3000-2094_4-10909915.html
and more...

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

HT204032 Can i get powernap on my Macbook Pro 13 inch mid 2012 with mountain lion running on it ?

Similar Messages

Maybe you are looking for