HT204409 Unable to connect to Wi-fi - Case # 547333

Unable to connect to wi-fi

This is an iPad user to user forum, so you are not addressing Apple.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • HT204409 unable to connect my ipad to my wireless internet - all other devices including another ipad, ipods, laptops etc.. connect fine?

    Can't seem to connect one of my ipads to our wireless network at home - every other device in the house is connected?
    any suggestions?

    Did it ever connect? How about to other networks?
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
    When unable to connect to 802.11n WiFi Networks
    http://support.apple.com/kb/TS3727?viewlocale=en_US&locale=en_US
    Wifi Settings greyed out or dim
    http://support.apple.com/kb/TS1559
    Recommended wifi settings
    http://support.apple.com/kb/HT4199

  • HT204409 Unable to connect my iphone 4s to wi fi

    I am unable to connect my iphone 4s to wifi now that I did the ios8 update

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT204409 unable to connect to network

    I am unable to join the network.  I have reset all wi-fi and disconnected router and turn ipad 2 on and off and still get the same message.  Any other ideas??  Thank you

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Outlook client in different subnet unable to connect to Exchange 2010 CAS using Windows 2008 R2 NLB multicast mode

    Hi all,
    need urgent assistance on the following issue
    this is my Exchange 2010 setup
    2 x CAS/Hub servers with HP network teaming, and load balanced using Windows NLB multicast mode. There are 2 VIPs on the NLB, one for outlook anywhere, one for autodiscover
    2 DNS records were created for the 2 VIPs
    Clients use Outlook Anywhere (HTTPS) to connect to the CAS servers from external segment via a Palo Alto firewall, which also acts as a layer 3 router
    static arp was set on the Palo Alto firewall, with both virtual MACs pointing to the primary virtual MAC used by the NLB. 
    Observations
    1. within same segment - no issue accessing Exchange servers, even when one CAS node is offline
    2. external segment (via firewall)
    a. when both nodes are up
    outlook client able to connect to Exchange CAS VIP on 443, but will disconnect after around 30 seconds. Client will retry and the pattern will repeat
    Exchange CAS RPC logs shows client connections and disconnections to the outlook anywhere VIP address
    Firewall logs shows allowed traffic from client to the VIPs
    unable to complete profile creation
    b. with only CAS2 (CAS1 stopped/deleted from NLB cluster)
    no issues accessing Exchange servers, creating profiles etc
    c. with only CAS1
    same behaviour as (a)
    reinstalled NLB, but doesn't resolve
    deleted CAS1 from NLB cluster, and re-add. issue remain
    Q1. is teaming supported? Teaming is currently set to automatic mode, instead of specified Fault Tolerant
    Q2. are there additional settings we need to set or verify on the Palo Alto firewall, since the issue only happen to external segment? Thanks!

    Yes - I've been scarred with this for many years :(
    If it is just CAS 1 that is causing issues, then focus in on that.  The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
    http://support.microsoft.com/kb/278431 
    Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config? 
    I also want to ask what the network team did for configuring the switch ports on the servers?  This will vary from vendor to vendor  - did they do the same config on both?
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Thanks Rhoderick, issue still persists
    can you also help clarify what you meant by "configuring the switch ports on the servers"?
    thanks again

  • HT204409 unable to connect to  internet

    Hi,Needing help with trying to  join the internet. I have an apple laptop and ipad 2 which all connect easily tot he internet via the same wifi network. My new ipad 3 will not despite ffg all the instructions to reset, switch off and restart .Please help.There are no other suggestions from the online support desk to assist me.

    I tried this and it failed,thanks anyway. It did connect to the internet initially when first bought and set up,but for some reason stopped.

  • 'Unable to connect' the number of free accounts can be enabled on this case has been reached

    hello ! please someone help me
    when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please

    hello ! please someone help me
    when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please
    iPhone 5s, iOS 7.1.1 

  • HT204409 I am unable to connect to my Wi-Fi at home, but am able to connect at work.  Using my new iPad 4G with cellular and a Motorola SBG6580.  My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

    I am unable to connect to my Wi-Fi at home, but am able to connect at work.  Using my new iPad 4G with cellular and a Motorola SBG6580.  My iPad 3G Wi-Fi only connects just fine; the 4G just "spins the gear."

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT204409 Suddenly my ipad seems unable to connect to our wifi. All other devices are working normally. Have I accidentally done something or is it a fault with my ipad ?

    Suddenly my ipad is unable to connect to our wifi. It buffers all the time?
    All other devices are working normally. Is this a fault wityh my ipad or have I inadvertantly altered some setting?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why am I unable to connect to my airport whenever I put my computer to sleep while the time machine is backing up?

    Ever since I installed Lion (version 10.7), I am unable to reconnected to my Time Capsule and get on the internet after I put my computer to sleep and then wake it back up. This doesn't happen all the time -- just when I put my computer to sleep when Time Machine is backing up. If I put my computer to sleep when it's not backing up, it's fine. If it is backing up though, when I wake my computer up again, it is unable to reconnect to the Time Capsule to allow me to use the internet. I have to wake the machine up, click on "Stop Backing Up", wait 30-60 seconds, click "Turn Wi-fi off", wait another 30 seconds, turn it back on and then I am fine. If I just turn wifi off and on without stopping the backup, it doesn't work and I am still unable to connect to the internet. I currently have 10.7.1 but it still has the same bug. 10.6.x did not have this bug. Other than "don't put your computer to sleep when Time Machine is backing up," any suggestions? Any help would be greatly appreciated!

    In this case, that hint may help.
    According to Apple support, some configuration files may get damaged or corrupt by time, after updates or upgrades and should get deleted ocasionally.
    OK ... switch off wifi on the machine.
    Then go on and delete the files mentioned below.
    You will find the files on your system drive (not your home folder) as follow:
    /library/preferences/com.apple.preferences.accounts.plist
    /library/preferences/com.apple.preferences.sharing.plist
    /library/preferences/SstemConfiguration/preferences.plist
    /library/preferences/SstemConfiguration/com.apple.airport.preferences.plist
    If there are files in this folders with the same name but additional .orig at the end, delete them too.
    It is possible that not all files are on your system. That will be ok.
    The files will get newly created by system on reboot.
    For that reboot the machine.
    Join your wireless again.
    If you are using Lion, the Library is hidden. You have to use (menu bar) "go to" -> "go to folder" on finder to access them.
    If the problem (unlikely) persists, report back here.
    Lupunus
    Message was edited by: lupunus (typo's fixed)

  • Adding a Subreport to existing report and getting this error, "Unable to connect: incorrect log on parameters"

    I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI.
    The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where for each Project Id that I am displaying I need to display several attached documents and the report I am working on is for several Project Id's.
    I figured this would be a perfect situation for a SubReport. I created a separate report which calls a stored procedure to get all of the Attached Documents for a specific Project Id. I thought if I were to add this new SubReport to the Original Report and link the Project Id's, easy-peazy, I would be done.
    This is not the case. I have vb code that loads the Original Report with a stored procedure and when this code runs with the setup I described above it fails when it is creating the final report with the following error:
    Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\~\ProjectDescriptionReport {6BA19F79-2A12-4826-B1F6-456EF799963B}.rpt: Unable to connect: incorrect log on parameters.
    I have no specific connections in my vb code for the reports. If I do not add the subreport to the main report, it loads correctly, so I know the error is caused by the subreport.
    This is the code that creates the original report (sorry for dumping the code here, i just thought it would be easier to see all the code) :
    Public Function LoadReport(ByVal inProjectNum As Integer, ByVal strProjectName As String) As DataTable ', ByVal inFiscalYear As Integer, ByVal inCompany As String) As DataTable
            Dim cnn As SqlConnection = Nothing
            Dim cmd As Data.SqlClient.SqlCommand
            Dim obj As New clsDataClass
            Dim dataAdapter As SqlClient.SqlDataAdapter
            Try
                LoadReport = New DataTable("DescriptionReport")
                cmd = New SqlCommand()      
                cnn = obj.Create_Connection()
                With cmd
                    .CommandType = Data.CommandType.StoredProcedure
                    .Connection = cnn
                    .CommandTimeout = "60"
                    .CommandText = "usp_GetProjectGroupSpecsCR"              
                    .Parameters.AddWithValue("@ProjectNumber", inProjectNum)
                    .Parameters.AddWithValue("@ProjectName", strProjectName)
                End With
                dataAdapter = New System.Data.SqlClient.SqlDataAdapter
                dataAdapter.SelectCommand = cmd
                dataAdapter.Fill(LoadReport)
                Dim oRpt As New ReportDocument()
                oRpt.Load(Server.MapPath("ProjectDescriptionReport.rpt"))
                oRpt.Refresh()
                oRpt.SetDataSource(LoadReport)
                'oRpt.OpenSubreport("AttachmentsReport").SetDataSource(LAR)
                oRpt.SetParameterValue("inProjectNum", inProjectNum)
                oRpt.SetParameterValue("strProjectName", strProjectName)
                oRpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "Projects_DescriptionReport") 'inCompany & "ProjectsReport_Description" & inFiscalYear) <-- Line where the error occures.
    What I need to know is what is the proper way to add a subreport to a vb.net application?
    From the ways I have tried it is clearly not working and I am out of ideas. I am fairly new to Crystal Reports and this way of coding it.
    Any help for this would be greatly appreciated, I've been stuck on this for a while and am finally reaching out to the Crystal Report Specialists.
    Thank you in advance,
    Bryan

    Hi Bryan,
    You may want to check the Connection properties also. I think the MS Data.SqlClient.SqlCommand is using the MDAC driver, or could be modified.
    If you are connecting to SQL Server 2008 or above you should be using the SQL Native 10 or 11 Client.
    As Dell suggests have a look at the samples and if you can use a DSN ( 32 bit or 64 bit ODBC Admin )
    Also search for "CRlogger", you'll find how to enable CR's database logging component and may help show you what part is failing.
    Don

  • [Solved] Samba log spam: Unable to connect to CUPS server

    Hi everyone,
    I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
    Apr 18 12:30:05 asakura nmbd[4361]: *****
    Apr 18 12:30:05 asakura nmbd[4361]:
    Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
    Apr 18 12:30:05 asakura nmbd[4361]:
    Apr 18 12:30:05 asakura nmbd[4361]: *****
    Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
    Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
    Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
    Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
    Those last two lines get spammed constantly.
    I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
    Unfortunately it doesn't appear to make any difference.
    Here is my /etc/samba/smb.conf:
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    # For a step to step guide on installing, configuring and using samba,
    # read the Samba-HOWTO-Collection. This may be obtained from:
    # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
    # Many working examples of smb.conf files can be found in the
    # Samba-Guide which is generated daily and can be downloaded from:
    # http://www.samba.org/samba/docs/Samba-Guide.pdf
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors.
    #======================= Global Settings =====================================
    [global]
    # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = MYGROUP
    # server string is the equivalent of the NT Description field
    server string = Samba Server
    # Security mode. Defines in which mode Samba will operate. Possible
    # values are share, user, server, domain and ads. Most people will want
    # user level security. See the Samba-HOWTO-Collection for details.
    security = user
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page
    ; hosts allow = 192.168.1. 192.168.2. 127.
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    load printers = no
    # you may wish to override the location of the printcap file
    ; printcap name = /etc/printcap
    # on SystemV system setting printcap name to lpstat should allow
    # you to automatically obtain a printer list from the SystemV spool
    # system
    ; printcap name = lpstat
    # It should not be necessary to specify the print system type unless
    # it is non-standard. Currently supported print systems include:
    # bsd, cups, sysv, plp, lprng, aix, hpux, qnx
    ; printing = cups
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    ; guest account = pcguest
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log
    # Put a capping on the size of the log files (in Kb).
    max log size = 50
    # Use password server option only with security = server
    # The argument list may include:
    # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    # or to auto-locate the domain controller/s
    # password server = *
    ; password server = <NT-Server-Name>
    # Use the realm option only with security = ads
    # Specifies the Active Directory realm the host is part of
    ; realm = MY_REALM
    # Backend to store user information in. New installations should
    # use either tdbsam or ldapsam. smbpasswd is available for backwards
    # compatibility. tdbsam requires no further configuration.
    ; passdb backend = tdbsam
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting.
    # Note: Consider carefully the location in the configuration file of
    # this line. The included file is read at that point.
    ; include = /usr/local/samba/lib/smb.conf.%m
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    ; interfaces = 192.168.12.2/24 192.168.13.2/24
    # Browser Control Options:
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    ; local master = no
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    ; os level = 33
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    ; domain master = yes
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ; preferred master = yes
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations.
    ; domain logons = yes
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    ; logon script = %m.bat
    # run a specific logon batch file per username
    ; logon script = %U.bat
    # Where to store roving profiles (only for Win95 and WinNT)
    # %L substitutes for this servers netbios name, %U is username
    # You must uncomment the [Profiles] share below
    ; logon path = \\%L\Profiles\%U
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    ; wins support = yes
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one WINS Server on the network. The default is NO.
    ; wins proxy = yes
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The default is NO.
    dns proxy = no
    # These scripts are used on a domain controller or stand-alone
    # machine to add or delete corresponding unix accounts
    ; add user script = /usr/sbin/useradd %u
    ; add group script = /usr/sbin/groupadd %g
    ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
    ; delete user script = /usr/sbin/userdel %u
    ; delete user from group script = /usr/sbin/deluser %u %g
    ; delete group script = /usr/sbin/groupdel %g
    #============================ Share Definitions ==============================
    ; [homes]
    ; comment = Home Directories
    ; browseable = no
    ; writable = yes
    # Un-comment the following and create the netlogon directory for Domain Logons
    ; [netlogon]
    ; comment = Network Logon Service
    ; path = /usr/local/samba/lib/netlogon
    ; guest ok = yes
    ; writable = no
    ; share modes = no
    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ;[Profiles]
    ; path = /usr/local/samba/profiles
    ; browseable = no
    ; guest ok = yes
    # NOTE: If you have a BSD-style print system there is no need to
    # specifically define each individual printer
    ; [printers]
    ; comment = All Printers
    ; path = /var/spool/samba
    ; browseable = no
    # Set public = yes to allow user 'guest account' to print
    ; guest ok = no
    ; writable = no
    ; printable = yes
    # This one is useful for people to share files
    ;[tmp]
    ; comment = Temporary file space
    ; path = /tmp
    ; read only = no
    ; public = yes
    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ;[public]
    ; comment = Public Stuff
    ; path = /home/samba
    ; public = yes
    ; writable = yes
    ; printable = no
    ; write list = @staff
    # Other examples.
    # A private printer, usable only by fred. Spool data will be placed in fred's
    # home directory. Note that fred must have write access to the spool directory,
    # wherever it is.
    ;[fredsprn]
    ; comment = Fred's Printer
    ; valid users = fred
    ; path = /homes/fred
    ; printer = freds_printer
    ; public = no
    ; writable = no
    ; printable = yes
    # A private directory, usable only by fred. Note that fred requires write
    # access to the directory.
    ;[fredsdir]
    ; comment = Fred's Service
    ; path = /usr/somewhere/private
    ; valid users = fred
    ; public = no
    ; writable = yes
    ; printable = no
    # a service which has a different directory for each machine that connects
    # this allows you to tailor configurations to incoming machines. You could
    # also use the %U option to tailor it by user name.
    # The %m gets replaced with the machine name that is connecting.
    ;[pchome]
    ; comment = PC Directories
    ; path = /usr/pc/%m
    ; public = no
    ; writable = yes
    # A publicly accessible directory, read/write to all users. Note that all files
    # created in the directory by users will be owned by the default user, so
    # any user with access can delete any other user's files. Obviously this
    # directory must be writable by the default user. Another user could of course
    # be specified, in which case all files would be owned by that user instead.
    ;[public]
    ; path = /usr/somewhere/else/public
    ; public = yes
    ; only guest = yes
    ; writable = yes
    ; printable = no
    # The following two entries demonstrate how to share a directory so that two
    # users can place files there that will be owned by the specific users. In this
    # setup, the directory should be writable by both users and should have the
    # sticky bit set on it to prevent abuse. Obviously this could be extended to
    # as many users as required.
    ;[myshare]
    ; comment = Mary's and Fred's stuff
    ; path = /usr/somewhere/shared
    ; valid users = mary fred
    ; public = no
    ; writable = yes
    ; printable = no
    ; create mask = 0765
    [shared]
    path = /media/shared
    valid users = foosoft
    public = no
    writable = yes
    [tomato]
    path = /media/data1/tomato
    valid users = foosoft
    public = no
    writable = yes
    show add printer wizard = no
    printing = none
    printcap name = /dev/null
    disable spoolss = yes
    I'm totally out of ideas here, anyone have a tip on what I could try next?
    Last edited by FooSoft (2009-04-18 19:52:28)

    glad you posted it first i had the same problem.
    However, samba was complaining that
    printing = none
    was invalid. I removed that line and it works great.
    thanks
    Last edited by lio (2009-10-16 00:20:14)

  • Mail: unable to connect to my SMPT server? Also new Mail Account defaults to iMap and won't let me change to Pop?

    Dear All,
    I've been with the same UK internet and email provider for years and they've given me solid and reliable service. I've worked my way through the Apple Knowledgebase checklist and tests and proved that my isp/esp is working normally so the problem has to be with Mail.
    I fiddled about trying to create a Mail Account on my late 2011 but-new-to-me MacBook Pro a couple of days ago and, it might be completely unrelated and simply a coincidence, but since then none of my devices, Iphone 4S, Powerbook G4, iPhone 3G, the MBPro can send email using Mail.
    Whenever I try I get prompted for my password but when I enter it says it's wrong but it definitely isn't because I even changed it this morning through my isp/esp and it worked and I then changed it back again to my correct password and it works also to get into webmail that is, not via Mail.
    When I run Mail\Window\Connection Doctor and check the status it shows Mail is unable to connect to server but that it can connect to the internet. I get the following message: Trying to log in to SMPT account failed.  Try to verify that username and password are correct.
    Now, whenever I try to create a new email account on MacBook Pro Mail keeps defaulting to iMap and wont let me change it to Pop which is what I need.
    Does anyone have any ideas?

    Dear All,
    I'll finish off this thread in case it's of use to anyone else in the future.
    I couldn't get the email pop account to recognise my sign-in even though I've been using it continually and without problem for the last several years. It's always been BT and Yahoo so it's more likely to be the fiddle about I did on my temporary, pre migration user account that caused the hiccup.
    In th end I had to create another pop account which I was able to once I'd migrated my settings from my PB G4 to the MB Pro.  Unfortunately this didn't merge the numerous email folders that I'd created previously in Mail but I still have them on the PB and I believe they can be transferred manually which is what I will do.
    Thanks for everyone that took the time to help.
    K

  • DirectNIC's customers outside of the U.S. are unable to connect to their email accounts using their blackberries

    I work for directNIC.com and our customers who are located in foreign countries are unable to send/receive email on their blackberry devices.  The problem started at the beginning of this month and we can not figure out what the problem is.  Our U.S. blackberry customers are not having any problems.  Our non-U.S. customers have reported errors such as needing to revalidate the account and when they tried to they received an invalid domain or invalid username/password message.  Some customers said the email just quit working and they received an unable to connect error message.  I've had one customer provide me with a link to their wireless provider's blackberry email account setup and I am unable to setup their email account there or any email account that uses any of our servers.  All of our customer's email accounts work in their email clients on their computers, their other phones, and through their webmail it is only their blackberries.  We've white listed all of blackberry's IP addresses and we've checked the server logs to see if there were any connection attempts when I tried to setup the email accounts through the customer's online blackberry interface and there wasn't even an attempt to connect to the server.  The error message that I receive is as follows:
    Email address domain not found:
    The email address domain 'insert domain name here' cannot be found. Please verify this
    information is correct. If the error persists contact 'insert domain name here' (your
    email provider)
    The problem isn't with just one wireless provider it's with multiple providers in multiple countries but the U.S. customers aren't reporting any problems.  I am able to setup my personal email account through his blackberry site, an email account from my work through his blackberry site, my yahoo.com email address, and my hotmail.com email address.  The only email accounts that do not work are the email accounts that are on any of our servers.   Some of these servers have different server configuration but all of them have all of blackberry's IP addresses whitelisted.  Our premium hostng email servers have the same software installed on them as my work email server does and my work email account works fine when I try to set it up through blackberry but none of the premium hosting email accounts that I tried to setup through this customers interface will work.  The problem is only with blackberry devices and is only with customers outside of the U.S.  If anyone has any thoughts or ideas please let us know.
    Thanks,
    Priscilla
    directNIC Support
    Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

    Hi and Welcome to the Forums!
    Sorry for the delay replying...while your post is a bit old now, it still deserves a response.
    First -- these forums are not a formal channel for support from RIM. Rather, they are user-to-user support forums where users help other users. As such, it is unlikely that RIM will see and respond to your inquiry.
    What I suggest is that you have your affected users exercise their formal support channel -- which is available via their carrier. The carriers have the ability to escalate cases into RIM for resolution.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • [Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

    When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
    “Unable to connect to the server by using Windows PowerShell remoting”.
    Figure 1: Unable to connect to the server by using Windows PowerShell remoting
    First of all, we need to verify the configurations as it suggested:
    1. The server must be available by using Windows PowerShell remotely.
    2. The server must be joined to a domain.
    3. The server must be running at least Windows Server 2012 R2.
    4. The currently logged on user must be a member of the local Administrators group on the server.
    5. Remote Desktop Services connections must be enabled by using Group Policy.
    In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
    To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
    Enable-PSRemoting -Force
    Figure 2: Enable PowerShell Remoting
    However, if issue persists, we need to check whether it has enough memory to work.
    By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
    the memory via the PowerShell command below:
    Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
    Then, you need to restart the server and the issue should be resolved.
    You can get more information regarding Remote Troubleshooting by below link:
    about_Remote_Troubleshooting
    If you need further assistance, welcome to post your questions in the
    RDS forum.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    i found another possible reason, this solution worked for me:
    http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
    I tried to set up powershell remoting on a server and kept getting this error:
    Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
    ot process the request. It cannot determine the content type of the HTTP response from the destination comput
    er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
    pic.
    After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
    many security groups or in my case because of the SidHistory attribute.
    The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
    If the keys does not exists you can create them, be sure to use the DWORD type.
    I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Maybe you are looking for

  • E71: Communication Center fails to load SMS messag...

    I have an E71, which I connect to my laptop and use to update my Calendar etc. I also read and reply to SMS from the Messages option of the communication Center. However, the messages fail to load intermittently, whereas other things like Contacts an

  • How to copy a node from one dom document to another?

    I have one dom document that I have to split up into multiple dom documents. I am able to get the inividual nodes that I want to put into seperate documents. My problem occurs when I create a new dom document and try to add the node from the parent d

  • Will CA cert be pushed along with the sever cert to the client in eap-tls?

    Hi All, I'm aware of that in eap-tls, the server-side cert will be pushed to the wireless client. I'm wondering if the CA root cert of the Radius server will be pushed as well. If not, I guess the client must have the CA cert pre-installed. Is there

  • The detail algorithm of OLTP table compress and basic table compress?

    I'm doing a research on the detail algorithm of OLTP table compress and basic table compress, anyone who knows, please tell me. 3Q, and also the difference between them

  • Field key for User fields

    For some reason it seems that the Field key for User fields is shared between WBS and Network Activity.  We use it for WBS-elements, but I want to close the User Fields tab for network activity. When I try to remove it for ntw activity I get the tab